Datamax-O'Neil microFlash 4t-4te Truck Mount Swivel Velcro Pad User Manual

110208-002

4

Truck Mount Swivel Velcro Pad

Procedures

Safety Guidelines:

• Position MF4t Truck Mount Swivel with enough room to properly open and close the printer; position the
MF4t Truck Mount Swivel so it is protected from environmental elements such as moisture, tools, and
boxes; and position the MF4t Truck Mount Swivel so as to not hinder with the normal operation of the
vehicle.

• Datamax-O’Neil does not accept liability for improperly mounted or poorly placed printers
and/or MF4t Truck Mount Swivel.

Installing the Truck Mount:

1. Clean area on dashboard where the MF4t Truck Mount Swivel is to be mounted thoroughly with alcohol and
let dry.

2. Peel adhesive backing from Velcro pad and apply Velcro pad to dashboard.

3. Let adhesive on Velcro pad to cure for 24 hours before installing the MF4t Truck Mount Swivel.

4. Install the MF4t Truck Mount Swivel on the Velcro pad.

5. Place the

MF4t printer (not included) onto the MF4t Truck Mount Swivel.

No Liability for Negligent Use

In no event shall Datamax-O’Neil be held liable for any damages whatsoever (including,
damages for loss of profits, business interruption, loss of information, or other pecuniary loss)
arising out of negligence in use and care of the product.

without limitations,