Datamax-O'Neil M-Class Mark II Thermal Transfer Option User Manual

92-2480-01 Rev.C

Thermal Transfer Option

Contents of the Thermal Transfer Kit

This kit contains the following items:

Thermal Transfer Assembly

Screws (3)

Follow the steps listed below to install this option.

Tools Required

To install this option you will need a #2 Phillips head screwdriver.

Step 1: Preparing the Printer

 Turn ‘Off’ the power switch and unplug the printer.
 Open the cover. Remove any installed media from the printer.

 Remove the three Screws that

secure the Cover Plate to the
printer.

 Remove the Cover Plate.

Screws

Cover Plate

1