Datalogic XRF410N-B10, XRF410N-H20, XRF410N-H00, XRF410N-H10, XRF410N-B01 Application Note

APPLICATION NOTE

XRF410N™

Installation

Reference Software Versions:

1.4.0 and later

History

Issue

Date

Paragraph

Change

Rev. 0

February 13, 2015

First Release

Rev. A

March 24, 2015

Added baud rate note

Rev. B

June 9, 2015

Added Electrical connection diagrams and
power supply table.

Rev. C

April 2016

Added CAB-MLP-05 wiring info

Rev. D

April, 2017

Changed power supply table.

XRF410N™ INSTALLATION

2

INTRODUCTION

XRF410N (named for its eXtended Reading Field), is a product developed mainly for T&L
applications with the goal of guaranteeing an extended horizontal field of view in order to fully
cover the entire width of a conveyor.

It is made up of two Matrix 410N™ model readers (optically pre-configured and not
modifiable). The readers are mounted onto a metal plate at a pre-defined distance from each
other (pitch), which depends on the optical model. They are also connected together
electrically by the ID-NET™ network.

The system therefore is pre-assembled and pre-configured to provide simpler installation.

Each M410N-XRF reader (including spare part readers) can only be used within an ID-NET
network in which at least one other reader is present. They cannot be used as Stand Alone
devices.

The various XRF410N models do not include CBX connection boxes or CBX connecting
cables so it is necessary to refer to the accessories list tables for the required material.

In terms of product performance there are two models:

- BP (Base Performance) for low cost applications and medium line speed. These
models have High Power Super Narrow Angle illuminators and use Image Cropping
(to avoid the presence of multiple packs inside the acquired image simultaneously).

- HP (High Performance) for high line speed applications. These models have Ultra
High Power illuminators and use full-frame images in PackTrack™ mode.

In addition, each of these is further divided into different optical models which are optimized
for different code resolutions, reading distances and field of view.

XRF410N™ INSTALLATION

3

The following table summarizes the main characteristics of the various models:

Model

XRF410N

1D Code

Resolution

Pitch
[mm]

Lighting

System

Reading

Distance

[mm]

DOF

[mm]

Focus

Dist.

[mm]

PPI

FOV
min.

[mm]

Overlap

min

between

readers

[mm]

Others

BP- B0x

Medium Res

0.38mm
(15mils)

235

LT-10

1270-

1670

400

1570

91

590

120

Cropped

Image:

1600x780

BP- B1x

High Res

0.33mm
(13mils)

175

LT-10

1050-

1450

400

1300

111

470

120

Cropped

Image

1600x780

HP- H0x

Medium Res

0.38mm
(15mils)

235

LT-20

1270-

1670

400

1570

91

590

120

Full

image &

Packtrack

HP- H1x

High Res

0.33mm
(13mils)

175

LT-20

1050-

1450

400

1300

111

470

120

Full

image &

Packtrack

HP- H2x

Very High

Res

0.25mm
(10mils)

155

LT-20

860-1110

250

960

147

395

85

Full

image &

Packtrack

Table 1 – Main Characteristics

In order to create multi-side or multi-point reading stations, the product line further includes
the following models:

- XRF410N-xx0 MASTER: made up of two readers: one Master and one Slave 1. The
Master must be connected directly to a CBX connection box through a CAB-DS-xx-S
cable. The Slave is already connected to a QL100 which is provided with a CBL-1490
ID-NET network terminator. The other end of the QL100 must be connected to the
CBX using a CBL-1480-xx cable to complete the ID-NET network.

- XRF410N-xx1 EXTENSION: made up of two Slave readers each connected to a
QL100. These models must be connected to a Master XRF410N through the ID-NET
network using a CBL-1480-xx cable to complete the ID-NET network.

One or more Extension XRF410N models can be chained together to extend the ID­NET network. When using the Extension models, the CBL-1490 ID-NET network
terminator (present on the QL100 of the Slave reader on the Master XRF410N) must
be transferred to the last slave on the last Extension XRF410N in the network.

XRF410N™ INSTALLATION

4

The complete list of XRF410N models is:

Description

Part Number

XRF410N-B00 2HD_MED RES_MASTER

937400028

XRF410N-B10 2HD_HI RES_MASTER

937400029

XRF410N-H00 2HD_HI PERF_MED RES_MASTER

937400030

XRF410N-H10 2HD_HI PERF_HI RES_MASTER

937400031

XRF410N-H20 2HD_HI PERF_VHI RES_MASTER

937400032

XRF410N-B01 2HD_MED RES_EXTENSION

937400033

XRF410N-B11 2HD_HI RES_EXTENSION

937400034

XRF410N-H01 2HD_HI PERF_MED RES_EXTENS

937400035

XRF410N-H11 2HD_HI PERF_HI RES_EXTENS

937400036

XRF410N-H21 2HD_HI PERF_VHI RES_EXTENS

937400037

The list of XRF410N accessories used to complete each installation is:

Required Accessories for XRF410N Base Performance Models

Description

1 Module

2 Modules

4 Modules

Part Number

XRF410N-B00 2HD_MED RES_MASTER

1 1 1

937400028

XRF410N-B01 2HD_MED RES_EXTENSION

- 1 3

937400033

CAB-ETH-M05 M12-IP67 ETHERNET CABLE (5M)

2 4 8

93A051348

CBL-1480-05 M12/5P MALE/FEMALE 5M IDNET

1 1 1

93A050051

CBL-1480-02 M12/5P MALE/FEMALE 2M IDNET

- 1 3

93A050050

CAB-DS05-S M12-IP67 TO CBX 5M

1 1 1

93A050060

CBX500 ATS-001 ASSEMBLY

1 1 1

93A301083

MEP-593 PHOTOCELL KIT

1 1 1

93ACC1791

OEK-2 OPTICAL ENCODER (CAB 10M+SPRING)

1 1 1

93ACC1770

BA400 M12 3P M. PANEL CONN. (EXT.POWER)

1 1 -

93ACC1853

CAB-PG-0002 VDC PWR PG120-IDNET 2M

1 1 -

93ACC1870

PG-120-K01 PWR SUPPLY KIT FOR M450 (EU)

1 1 -

93ACC0046

PWR-480B POWER UNIT 110/230VAC 24V

- - 1

93ACC0076

The OEK-2 Encoder is necessary when using PackTrack Operating Mode.

XRF410N™ INSTALLATION

5

Required Accessories for XRF410N High Performance Models

Description

1 Module

2 Modules

4 Modules

Part Number

XRF410N-H10 2HD_HI PERF_HI RES_MASTER

1 1 1

937400031

XRF410N-H11 2HD_HI PERF_HI RES_EXTENS

- 1 3

937400036

CAB-ETH-M05 M12-IP67 ETHERNET CABLE (5M)

2 4 8

93A051348

CBL-1480-05 M12/5P MALE/FEMALE 5M IDNET

1 1 1

93A050051

CBL-1480-02 M12/5P MALE/FEMALE 2M IDNET

- 2 6

93A050050

CAB-DS05-S M12-IP67 TO CBX 5M

1 1 1

93A050060

CBX500 ATS-001 ASSEMBLY

1 1 1

93A301083

CAB-MLP-05 MULTI LIGHTING POWER 5M

1 1 1

93A050084

MEP-593 PHOTOCELL KIT

1 1 1

93ACC1791

OEK-2 OPTICAL ENCODER (CAB 10M+SPRING)

1 1 1

93ACC1770

BA400 M12 3P M. PANEL CONN. (EXT.POWER)

1 - -

93ACC1853

CAB-PG-0002 VDC PWR PG120-IDNET 2M

1 - -

93ACC1870

PG-120-K01 PWR SUPPLY KIT FOR M450 (EU)

1 - -

93ACC0046

PWR-480B POWER UNIT 110/230VAC 24V

- 1 1

93ACC0076

The OEK-2 Encoder is necessary when using PackTrack Operating Mode.

In addition, the following single Spare Part replacement readers (relative to the specific
XRF410N model) available for order;

Description

Part Number

MATRIX 410N XRF-B0x SPARE UNIT-REPLMNT

937400038

MATRIX 410N XRF-B1x SPARE UNIT-REPLMNT

937400039

MATRIX 410N XRF-H0x SPARE UNIT-REPLMNT

937400040

MATRIX 410N XRF-H1x SPARE UNIT-REPLMNT

937400041

MATRIX 410N XRF-H2x SPARE UNIT-REPLMNT

937400042

XRF410N™ INSTALLATION

6

INSTALLATION

GENERAL ID-NET CONFIGURATION

 When using a single XRF410N-xx0 MASTER, no ID-NET network configuration is

necessary. This product leaves the factory pre-configured and the readers have
respective Master and Slave 1 roles.

 When using one or more XRF410N-xx1 EXTENSION(s) with the XRF410N-xx0

MASTER, the first step is to configure the ID-NET network because the EXTENSION
Slave readers leave the factory with the unusable Slave 0 role (jolly).

The installation procedure for multi XRF readers is summarized below:

1. Mount the various XRF410Ns to the station frame.

2. Connect the ID-NET cabling, moving the ID-NET terminator to the last node in the
network.

3. Run DL.CODE™ and connect to the Master reader.

4. Run “New Configuration - Multi Device. This will assign ID-NET addresses to all the
Slaves in the network associating them with their respective serial numbers. Click
Apply Changes.

CAUTION: XRF410N models have a default baudrate of 1 Mbs and are
designed to be used in applications where the overall cable length does not
exceed 30 meters. XRF410N models can only be connected in an ID-NET
network to other XRF410N models; mixed networks with other types of Matrix
readers are not allowed.

POWER REQUIREMENTS

Depending on the number of XRF410Ns used a different power supply will be required. The
following table indicates which power supply to use for your application.

Number of Modules

XRF410N Model

1

2

3 to 4

5 to 8

Base (Bxx)

PG-120-K0x

PG-120-K0x

PWR-480B

PWR-480B

Hi Perf (Hxx)

PG-120-K0x

PWR-480B

PWR-480B

PWR-480B (x2)