Datalogic Scanning, Inc.
959 Terry Street
Eugene, Oregon 97402
Telephone: (541) 683-5700
Fax: (541) 345-7140
An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in
any form or by any means without prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”). Owners
of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal
business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that
all notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either
be downloadable from the Datalogic website (www.scanning.datalogic.com) or provided on appropriate media. If you visit our website and would like to make
comments or suggestions about this or other Datalogic publications, please let us know via the "Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change
any specification at any time without prior notice.
Datalogic is a registered trademark of Datalogic S.p.A. and the Datalogic logo is a trademark of Datalogic S.p.A. all licensed to Datalogic Scanning, Inc. All other
trademarks and trade names referred to herein are property of their respective owners.
This guide is intended for use with DATALOGIC products supporting the Universal Wedge interface. The information in this guide includes :
PC or Terminal Model : (PC or Terminal model and Manufacturer).
Keyboard Type ID: (This number entered into the wedge configuration for the proper PC / Terminal emulation by country),
DATALOGIC terminal cable part number : (DATALOGIC part number for ordering, call your DATALOGIC Sale Representative for availability of cables)
Single Cable Option : (Designates if a single cable connection is available, see table 1b),
Product minimum wedge software version : (The minimum WEDGE firmware version required to support the listed PCs and Terminals by product. No firmware listing designates no support)
2.0 CABLING :
Cables for connecting your DATALOGIC scanner to the listed PC / Terminal can be accomplished in one of two ways:
Scanner base cable and terminal cable. (base cable will connect to the various terminal cables listed on pages 2-10.) DATALOGIC single cable option.
Scanner Base Cable
Scanner
Terminal Cable
Minicomputer
Keyboard
Product(s) Scanner Base Cable for use with cables listed on pages 4-15.
VS1000 w/ STI Interface
VS1200 w/ STI Interface
HS1250 w/ STI Interface
SP400RF w/ STI Interface
SP400 WorldWideWedge
QS6000+ Universal Wedge
DUET Universal Wedge
VS800 Universal Wedge
PowerScan UW
QS1000 UW
Part Number Description
8-0203-01 12' base cable, 25 pin "D" connector.
8-0177-01 12' base cable, 25 pin "D" connector base cable, Power off external AC adapter option.
8-0424-15 15' base cablew/ext. AC power option. 8-0424-08 IBM PC AT/DATALOGIC, POT, KBW, 11’
8-0466-11 12' base cable, 25 pin "D" connector, Socket, Power off external AC power adapter ONLY. 8-0466-04 8', 5 pin "Din" connector, Plug (Computer end), 6 pin "Mini Din" connector, Socket (Keyboard end), Power
8-0424-16 12' base cable, 25 pin ‘D’ connector, socket w/ power off external AC power adapter option. 8-0424-08 IBM PC AT/PS2, POT, KBW, 11’. (For XT/AT applications only)
Table 1a. Table 1b.
Datalogic Single Cable
Scanner
DATALOGIC single cable options (except where noted)
Part Number Desciption
None
8-0119-01 8', 9 pin "D" connector, Socket, Power off the terminal, Indirect-connect for IBM (or compatible) computer
type PC/AT through "Y" cable 8-0120-01 or 8-0120-02. (This option is a two cable solution.)
off external brick, Direct-connect for Universal PC application using Adapter cable # 2103-0035 (5 pin to
6 Mini pin). (For XT/AT applications only)
Minicomputer
Keyboard
Page 3
F (1) = France Type I, F (2) = France Type II ,USA = Untited States ,D = Germany ,B = Belgium ,UK = England ,ALT = ALT mode ,I = Italy ,CH = Swiss ,S = Sweden ,E = Spain ,H = Hungary. *: Requires +5 volt or standard product power supply.
INTL = France International , J = Japan , DK = Denmark , PO = Portugal ,IL = Israel , PL = Poland , NO = Norway ,
Terminal
Cable p/n.
PC OR TERMINAL MODEL
KEYBOARD TYPE
F (1) F (2) USA D B UK ALT I CH S E H INTL Minimum DATALOGIC Released Wedge Software
F (1) = France Type I, F (2) = France Type II ,USA = Untited States ,D = Germany ,B = Belgium ,UK = England ,ALT = ALT mode ,I = Italy ,CH = Swiss ,S = Sweden ,E = Spain ,H = Hungary. *: Requires +5 volt or standard product power supply.
INTL = France International , J = Japan , DK = Denmark , PO = Portugal ,IL = Israel , PL = Poland , NO = Norway ,
Terminal
Cable p/n.
PC OR TERMINAL MODEL
KEYBOARD TYPE
F (1) F (2) USA D B UK ALT I CH S E H INTL Minimum DATALOGIC Released Wedge Software
252 253 254 444 CWIPSPS y D71.05 D71.05 QS6.00 D00.07
Use with
basecables
listed in
Table 1a.
CWIPSPS y D71.05 D71.05 QS6.00 D00.07
CWIPSPS y D71.05 D71.05 QS6.00 D00.07
CWFINFI-PF
Single
Cable
Option
See
Table
VS1000
VS1200
HS1250
SP400RF
SP400WWW
QS6000+
PowerScan
Duet
VS800
1b.
QS1000
Version
D71.05 D71.05 QS6.00
Page 5
F (1) = France Type I, F (2) = France Type II ,USA = Untited States ,D = Germany ,B = Belgium ,UK = England ,ALT = ALT mode ,I = Italy ,CH = Swiss ,S = Sweden ,E = Spain ,H = Hungary. *: Requires +5 volt or standard product power supply.
INTL = France International , J = Japan , DK = Denmark , PO = Portugal ,IL = Israel , PL = Poland , NO = Norway ,
Terminal
Cable p/n.
PC OR TERMINAL MODEL
KEYBOARD TYPE
F (1) F (2) USA D B UK ALT I CH S E H INTL Minimum DATALOGIC Released Wedge Software
FORCE
F 476/477 M, TM 1471 W 56 57 96 258 362 221 CWI3480 D71.05 D71.05 QS6.00 D00.07 FORUM
AT 286 1 654 11 104 644 611 114 123 148 169 313 437 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
GOLDSTAR
GS 317 1 654 11 104 644 611 114 123 148 169 313 437 CWIPSPS y D71.05 D71.05 QS6.00 D00.07
GOUPIL
G 5-386/G 40 1 654 11 104 644 611 114 123 148 169 313 437 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
G 6, GOLF 1 654 11 104 644 611 114 123 148 169 313 437 CWIPSPS y D71.05 D71.05 QS6.00 D00.07
F (1) = France Type I, F (2) = France Type II ,USA = Untited States ,D = Germany ,B = Belgium ,UK = England ,ALT = ALT mode ,I = Italy ,CH = Swiss ,S = Sweden ,E = Spain ,H = Hungary. *: Requires +5 volt or standard product power supply.
INTL = France International , J = Japan , DK = Denmark , PO = Portugal ,IL = Israel , PL = Poland , NO = Norway ,
Terminal
Cable p/n.
PC OR TERMINAL MODEL
KEYBOARD TYPE
F (1) F (2) USA D B UK ALT I CH S E H INTL Minimum DATALOGIC Released Wedge Software
KIMTRON
KT-70 PC/XT 0 10 361 168 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
KONTRON
ICU/IR, KAT 286, KPR8/KPR10/KPR20 1 654 11 104 644 611 114 123 148 169 313 437 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
INLITE 386 SL 25, IPLITE Color 486 DX 33 LP, MARLIN 1 654 11 104 644 611 114 123 148 169 313 437 CWIPSPS y D71.05 D71.05 QS6.00 D00.07
KOI Color 386 SL 25 (normal input available) 1 654 11 104 644 611 114 123 148 169 313 437 CWIPSPS y D71.05 D71.05 QS6.00 D00.07
KOI Color 386 SL 25 (Alt keyboard input available) 1 654 11 104 644 611 114 123 148 169 313 437 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
LEANORD
CHALLENGER 2, TOWER 386 SX/16 1 654 11 104 644 611 114 123 148 169 313 437 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
LINK / VISA
MC2/MC3+/MC4/MC5/MC5+/MC6/ MC80/MC420 Style IBM Enhanced
PC
MC2/MC3+/MC4/MC5/MC5+/MC6/ MC80/MC420 ANSI Keyboard 105
Keys
MC2/MC3+/MC4/MC5/MC5+/MC6/ MC80/MC420 ASCII Keyboard 273 274
MC2/MC3+/MC4/MC5/MC5+/MC6/ MC80/MC420 IBM-PCAT w/ 84 keybd 275
MC70 Style IBM PC 508* 506* 507*
MC70 ANSI VT220/320 Keyboard 511* 509* 510*
MC70 ANSI VT420 Keyboard 514* 512* 513*
MC70 ASCII Keyboard 101 Keys 517* 515* 516*
MAX28 Style IBM Enhanced PC 408 409 411 410
MAX 700/900 Style IBM PC 508 506 507
MAX 700/900 ANSI VT220/320 Keyboard 511 509 510
MAX 700/900 ANSI VT420 Keyboard 514 512 513
MAX 700/900 ASCII Keyboard 101 Keys 517 515 516
MAI
4315 1 654 11 104 644 611 114 123 148 169 313 437 CWIPSPS y D71.05 D71.05 QS6.00 D00.07
4315 A 1 654 11 104 644 611 114 123 148
MANNESMANN / KIENZLE
PC 920 1 654 11 104 644 611 114 123 148 169 313 437 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
MDS / HARRIS ADACOM
6191-3/9191 D/9192/9471, HA 470/471/472
*Keyboard in tape writer native mode 8 257 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
*Emulation Keyboard mode 35 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
NV 470/471/472/481/482 56 57 96 258 362 221 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
MEMOREX
1092/1097, 1197 D/E, 2180-1/2180-2/2192/2291/2296/2391 386 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
1092/1097/ 1197 D/E /2180-1/2180-2/2192/2291/2296/2391 122 Keys 389 116 92 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
1191/1192/1471/1472/1476/1477/1481/1482/1483/1486/1487/1489 2 12 209 122 210 363 75 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
1488 332 335 336 333 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
2179 388 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
PC 7000 0 10 361 168 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
MEMOREX TELEX
TELEX 53 54 357 358 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
078/079/080/178/179/180 439 441 440 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
078/079/080/178/179/180 122 Keys 19 107 255 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
191/196 122 Keys 52 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
MITAC
1000 P 118 161 162 CWIPSPS y D71.05 D71.05 QS6.00 D00.07
3060 G 1 654 11 104 644 611 114 123 148 169 313 437 CWIPSPS y D71.05 D71.05 QS6.00 D00.07
NCD
15 B / 17 C / MCX-L / MCX 17 DEC Style
15 B PS/2 Style 185 186 187 189 188 190 CWIPSPS y D71.05 D71.05 QS6.00 D00.07
15 B / 17 C / MCX-L / MCX 17 SUN Type 5 Style 572 573 574 CWIPSPS y D71.05 D71.05 QS6.00 D00.07
17 C / MCX-L / MCX 17 PS/2 Type 5 Style 656 217 CWIPSPS y D71.05 D71.05 QS6.00 D00.07
NCR
6/8 1 654 11 104 644 611 114 123 148 169 313 437 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
4I/6I 0 10 361 168 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
3301 1 654 11 104 644 611 114 123 148 169 313 437 CWIPSPS y D71.05 D71.05 QS6.00 D00.07
NEXT
NEXT 191 192 194 193 195
NIXDORF (SEE SIEMENS)
F (1) = France Type I, F (2) = France Type II ,USA = Untited States ,D = Germany ,B = Belgium ,UK = England ,ALT = ALT mode ,I = Italy ,CH = Swiss ,S = Sweden ,E = Spain ,H = Hungary. *: Requires +5 volt or standard product power supply.
INTL = France International , J = Japan , DK = Denmark , PO = Portugal ,IL = Israel , PL = Poland , NO = Norway ,
Terminal
Cable p/n.
PC OR TERMINAL MODEL
F (1) F (2) USA D B UK ALT I CH S E H INTL Minimum DATALOGIC Released Wedge Software
F (1) = France Type I, F (2) = France Type II ,USA = Untited States ,D = Germany ,B = Belgium ,UK = England ,ALT = ALT mode ,I = Italy ,CH = Swiss ,S = Sweden ,E = Spain ,H = Hungary. *: Requires +5 volt or standard product power supply.
INTL = France International , J = Japan , DK = Denmark , PO = Portugal ,IL = Israel , PL = Poland , NO = Norway ,
Terminal
Cable p/n.
PC OR TERMINAL MODEL
F (1) F (2) USA D B UK ALT I CH S E H INTL Minimum DATALOGIC Released Wedge Software
ST Series 1 654 11 104 644 611 114 123 148 169 313 437 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
TANDON
PCA 12SL/20/30, PCX 20, PLUS TM 7630 1 654 11 104 644 611 114 123 148 169 313 437 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
PCX10 0 10 361 168 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
F (1) = France Type I, F (2) = France Type II ,USA = Untited States ,D = Germany ,B = Belgium ,UK = England ,ALT = ALT mode ,I = Italy ,CH = Swiss ,S = Sweden ,E = Spain ,H = Hungary. *: Requires +5 volt or standard product power supply.
INTL = France International , J = Japan , DK = Denmark , PO = Portugal ,IL = Israel , PL = Poland , NO = Norway ,
Terminal
Q
Cable p/n.
PC OR TERMINAL MODEL
KEYBOARD TYPE
F (1) F (2) USA D B UK ALT I CH S E H INTL Minimum DATALOGIC Released Wedge Software
65/65 ES/120/185/325 ANSI W285 Keyboard 105 Keys 383* 384* 385*
65/65 ES/120/185/325 ASCII Keyboard 298* 299* 394*
65/65 ES/120/185/325 IBM-PCAT Keyboard 84 Keys 300*
60/85/99 GT/150/160/285 Style IBM Enhanced IBM 635*
60/85/99 GT/150/160/285 Style IBM Enhanced PC, 520/520 ES Style IBM
Enhanced PC FR
60/85/99 GT/150/160/285 ANSI Keyboard 105 Keys, 520/520 ES ANSI
Keyboard 105 Keys
60/85/99 GT/150/160/285 ANSI W285 Keyboard 105 Keys, 520/520 ES
ANSI W285 Keyboard 105 Keys
60/85/99 GT/150/160/285 ASCII Keyboard, 520/520 ES ASCII Keyboard 274* 273* 393*
60/85/99 GT/150/160/285 IBM-PCAT Keyboard 84 Keys, 520/520 ES
IBM-PCAT Keyboard 84 Keys
60/85/99 GT/150/160/285 IBM-316X Keyboard 707*
55/370/355 Style Enhanced IBM PC 508* 506* 507*
55/370/355 ANSI VT220/320 Keyboard 511* 509* 510*
55/370/355 ANSI VT420 Keyboard 514* 512* 513*
55/370/355 ASCII Keyboard 101 Keys 517* 515* 516*
2012, DECISION 386 SX-20/486 SX-20 1 654 11 104 644 611 114 123 148 169 313 437 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
WINTERM 2000 / 2000 T / 2500 / 2500 C /2500 T
55 IBM Enhanced PC
55 ANSI Keyboard 105 Keys
55 ANSI W285 Keyboard 105 Keys
55 ASCII Keyboard
55 IBM PCAT Keyboard 84 Keys
ZENITH DATA SYSTEM
320 SX, AT Z 286, Z-425/SX 1 654 11 104 644 611 114 123 148 169 313 437 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
PC 4 14 355 356 CWIXTAT y D71.05 D71.05 QS6.00 D00.07
F (1) = France Type I, F (2) = France Type II ,USA = Untited States ,D = Germany ,B = Belgium ,UK = England ,ALT = ALT mode ,I = Italy ,CH = Swiss ,S = Sweden ,E = Spain ,H = Hungary. *: Requires +5 volt or standard product power supply.
INTL = France International , J = Japan , DK = Denmark , PO = Portugal ,IL = Israel , PL = Poland , NO = Norway ,
Terminal
Cable p/n.
NOTEBOOKS
F D USA B UK ALT I CH S E H Minimum DATALOGIC Product Wedge Software Version
ALL NOTEBOOKS using RS232 port
equiped with a RS232 9 pin COM-PORT and a 6 pin minidin MOUSE PORT
- With reconnection of the mouse
- Without reconnection of the mouse
ACER
EXTENSA 355
APPLE MACINTOSH using ADB port
MAC POWERBOOK 145/160/165C/170/180:
With reconnection of the mouse
Without reconnection of the mouse 24 25 115 93 171 577 CNAM145 D71.05 D71.05 QS6.00 D00.07
COMPAQ using external keyboard port
CONTURA 400 C 483 484 485 CNIT350 D71.05 D71.05 QS6.00 D00.07
CONTURA 410/410 C/410 CX/420C / LTE 5380 480 481 482 CNIT350 D71.05 D71.05 QS6.00 D00.07
LTE 5150 486 487 488 CNIT350 D82.03 QS6.00 D00.07
DIGITAL using external keyboard port
HINOTE CS433 565 566 567 CNIT350 D71.05 D71.05 QS6.00 D00.07
HINOTE Ultra CS450 590 591 592 593 594 595 596 597 CNIT350 D71.05 D71.05 QS6.00 D00.07
HINOTE Ultra CS475 486 487 488 CNIT350 D71.05 D71.05 QS6.00 D00.07
DUAL using external keyboard port
486 DX/66 (Wedge must use EPROM DIT50) CNIT350 DIT50 DIT50 DIT50
FUJITSU
LIFEBOOK 520D 712 CNIT350 D82.03 QS6.00 D00.07
HEWLETT PACKARD
2100 486 CNIT340 D71.05 D71.05 QS6.00 D00.07
IBM using external keypad port
PS/2 Model L40 SX -PAD- 605 605 605 CNIT340 D71.05 D71.05 QS6.00 D00.07
IBM using external keyboard port
THINKPAD 310 715 CNIT340 D82.03 D00.07
THINKPAD 340/340 CSE/ 755 601 602 603 604 CNIT340 D71.05 D71.05 QS6.00 D00.07
THINKPAD 345 CS / 360 607 608 609 610 CNIT340 D71.05 D71.05 QS6.00 D00.07
THINKPAD 350 / 701/730/750CX 486 487 488 CNIT350 D71.05 D71.05 QS6.00 D00.07
THINKPAD 365 x 483 484 485 CNIT350 D82.03 QS6.00 D00.07
THINKPAD 760 XL 480 481 482 CNIT340 D82.03 D00.07
ICL using external keyboard port
DESIGN
NEC
Versa Note Vxi
TOSHIBA using external keyboard port
T1200 X1 with reconnection of the mouse
without reconnection of the mouse
T1800 with reconnection of the mouse
without reconnection of the mouse
T2000 SX with reconnection of the mouse
without reconnection of the mouse
PORTEGE 610 CT with station
SATELLITE T2110/T2110 CS/ T 2130 CS/T2130 CT / T2150 CDS/T2150
CDT
SATELLITE PRO 220CS / SATELLITE 230 CX / TECRA 550 – 750
SATELLITE PRO 400 CS/400 CDT/410 CDT/430CDS
SATELLITE PRO 440 CDX
TECRA 700 CT/ 510
F (1) = France Type I, F (2) = France Type II ,USA = Untited States ,D = Germany ,B = Belgium ,UK = England ,ALT = ALT mode ,I = Italy ,CH = Swiss ,S = Sweden ,E = Spain ,H = Hungary. *: Requires +5 volt or standard product power supply.
INTL = France International , J = Japan , DK = Denmark , PO = Portugal ,IL = Israel , PL = Poland , NO = Norway ,
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.