Datalogic Touch TD1100 Quick Reference Manual

Touch TD1100

General Purpose Corded Handheld

Contact Imager Bar Code Reader

Quick Reference Guide

Datalogic ADC, Inc.

959 Terry Street
Eugene, OR 97402
USA
Telephone: [phone]
Fax: [phone]

©2012-2014 Datalogic, Inc.

An Unpublished Work - All rights reserved. No part of the contents of this documentation
or the procedures described therein may be reproduced or transmitted in any form or by
any means without prior written permission of Datalogic ADC, Inc. or its subsidiaries or
affiliates ("Datalogic" or “Datalogic ADC”). Owners of Datalogic products are hereby
granted a non-exclusive, revocable license to reproduce and transmit this documentation
for the purchaser's own internal business purposes. Purchaser shall not remove or alter
any proprietary notices, including copyright notices, contained in this documentation and
shall ensure that all notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by
contacting your Datalogic representative. Electronic versions may either be downloadable
from the Datalogic website (www.datalogic.com) or provided on appropriate media. If you
visit our website and would like to make comments or suggestions about this or other
Datalogic publications, please let us know via the "Contact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is
complete and accurate, however, Datalogic reserves the right to change any specification
at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many
countries, including the U.S.A. and the E.U. All other brand and product names may be
trademarks of their respective owners.

Patents

See www.patents.datalogic.com for patent list.

This product is covered by one or more of the following patents:

Design patents: EP002137570, USD692892, ZL201230602800.2

Utility patents: EP0789315B1, EP1797521B1, US5992740, US6098883, US6454168,
US6561427, US7506816

Quick Reference Guide i

Table of Contents

Software Product Policy ....................................................................................................v

Customers Under Software Support ...................................................................v

Parts of the Reader ..............................................................................................................1

Holder/Hands-Free Stand ................................................................................................2

Setup ........................................................................................................................................2

Connect/Disconnect Cable .....................................................................................2

Connect Host Interface .............................................................................................3

Touch and Scan ...........................................................................................................4

Programming Bar Codes ..................................................................................................5

Resetting the Standard Product Defaults ..........................................................5

Host Interfaces .............................................................................................................5

RS-232 Interface .................................................................................................6

USB Interface .......................................................................................................7

Keyboard Wedge Interface .............................................................................8

Wand Emulation Interface ..............................................................................8

Scanning Modes ..................................................................................................................9

Scanning Modes (continued) ..................................................................... 10

Troubleshooting ............................................................................................................... 11

Technical Features ........................................................................................................... 12

LED and Beeper Indications ......................................................................................... 14

Ergonomic Recommendations ................................................................................... 14

Regulatory Information .................................................................................................. 15

Power Supply ................................................................................................... 15

Radio Frequency Interference Requirements ....................................... 16

Radio Frequency Interference Requirements - Canada .................... 16

Reader Labeling ....................................................................................................... 16

WEEE Statement ...................................................................................................... 18

Datalogic ADC Limited Factory Warranty ....................................................... 19

Warranty Coverage ........................................................................................ 19

Warranty Claims Process .............................................................................. 19

Warranty Exclusions ....................................................................................... 20

No Assignment ................................................................................................ 20

Risk of Loss ........................................................................................................ 21

Services and Support ...................................................................................................... 21

ii Touch TD1100

NOTES

Quick Reference Guide iii

Datalogic ADC, Inc.

TOUCH

TM

PRODUCT SERIES END USER LICENSE AGREEMENT

Notice to End User: The Datalogic Product you have acquired contains embedded Software, which is inte­gral to the product's operation. This Software is being provided to you under license, subject to the terms
and conditions of this Agreement. If you use the Datalogic Product, you will be deemed to have accepted
the terms and conditions of this Agreement. If you do not intend to be bound to the terms of this Agree­ment, Datalogic is not willing to license the Software to you, you may not use the Datalogic Product or the
Software, and you must contact the party from whom you acquired the Datalogic Product for instruc­tions.

This End User Software License Agreement ("Agreement") is a legally binding agreement governing the
licensing of the Software and Documentation by Datalogic ADC, Inc. and its Affiliates ("Datalogic") to the
entity or person who has purchased or otherwise acquired a Datalogic Product ("End User"). For purposes
of this Agreement, any software that is associated with a separate end-user license agreement is
licensed to you under the terms of that license agreement. Datalogic and End User hereby agree as fol­lows:

1. Definitions.

1.1 "Affiliate" means a business entity currently existing or later acquired that controls, is controlled by, or

is under common control with Datalogic S.p.A.

1.2 "Documentation" means materials such as user's guides, program reference guides, quick reference

guides, manuals, or similar materials associated with or related to the Datalogic Product, whether in
printed, "online", or other form.

1.3 "Proprietary Information" means: (a) source code, object code, software, documentation, and any

related internal design, system design, data base design, algorithms, technology, technical data or
information, implementation techniques, and trade secrets related to the Software, (b) any other
trade secrets marked appropriately or identified as proprietary or confidential, and (c) any information
that End User, under the circumstances, should recognize as confidential. Proprietary Information
does not include any information that the receiving party can establish was (1) in the public domain,
(2) already in the receiving party's possession or rightfully known prior to receipt, (3) rightfully learned
from a third party not in violation of any other's proprietary rights, or (4) independently developed
without access to Proprietary Information.

1.4 "Datalogic Product" means the Datalogic

TM

TouchTM series scanner product, including all embedded
Software in and all Documentation related to such product, which has been purchased or otherwise
acquired by End User, whether obtained directly or indirectly from Datalogic.

1.5 "Software" means any software or computer programs of Datalogic or its third party licensors in
machine readable form which is embedded in the Datalogic Product, whether obtained directly or
indirectly from Datalogic, including any replacement, update, upgrade, enhancement or modification.

2. Scope Of License Granted.

2.1 Datalogic grants to End User a non-exclusive, non-transferable, perpetual license to use the Soft­ware, solely on the Datalogic Product in which it is embedded ("designated Datalogic Product"), in
machine-readable form only, solely for End User's internal business purposes. This Agreement does
not convey ownership of the Software to End User. Title to the Software shall be and remain with
Datalogic or the third party from whom Datalogic has obtained a licensed right. As used in this Agree­ment, the term "purchase" or its equivalents when applied to the Software shall mean "acquire under
license." End User is not entitled to receipt or use of the source code to any Software.

2.2 End User shall not copy, modify, decompile, disassemble, reverse engineer, or otherwise reproduce or
remanufacture the Software, whether modified or unmodified, nor sell, assign, sublicense, distribute,
lend, rent, give, or otherwise transfer the Software to any other person or organization, for purposes
other than as expressly provided in this Agreement, without Datalogic's prior written consent.

3. Transfers, Support.

3.1 Any copying, installing, reproduction, remanufacture, reverse engineering, electronic transfer, or other
use of the Software on other than the designated Datalogic Product will be a material breach of this
Agreement. However, Datalogic may elect not to terminate this Agreement or the granted licenses,
but instead may elect to notify End User that End User is deemed to have ordered and accepted a
license for each breaching use. End User shall pay Datalogic the applicable list price for such licenses
as of the date of such breach.

3.2 End User shall not sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Data­logic Product to any third party unless such third party agrees with Datalogic in writing to be bound
by the terms and conditions of this Agreement. Any such transfer of the Datalogic Product absent
such agreement shall be null and void.

3.3 End User may obtain support for Software from Datalogic at Datalogic's standard support fees and
under Datalogic's standard support terms and conditions in effect at the time the support is
requested.

4. Intellectual Property.

End User acknowledges that the Software constitutes valuable trade secrets of Datalogic or Datalogic's

iv Touch TD1100

third party licensors and that the Software is protected by intellectual property laws and treaties. The
license set forth in this Agreement does not transfer to End User any ownership of Datalogic's or its third
party licensors' copyrights, patents, trademarks, service marks, trade secrets, or other intellectual prop­erty rights and End User shall have no right to commence any legal actions to obtain such rights. End User
shall not remove, modify, or take any other action that would obscure any copyright, trademark, patent
marking, or other intellectual property notices contained in or on the Datalogic Product.

5. Proprietary Information.

5.1 End User acknowledges that Proprietary Information is the confidential, proprietary, and trade secret
property of Datalogic and Datalogic's third party licensors and End User acquires no right or interest in
any Proprietary Information.

5.2 End User shall not disclose, provide, or otherwise make available the Proprietary Information of Data­logic or its third party licensors to any person other than End User's authorized employees or agents
who are under confidentiality agreement, and End User shall not use the Proprietary Information
other than in conjunction with use of the Datalogic Product exclusively for End User's internal busi­ness purposes. End User shall take steps to protect the Proprietary Information no less securely than
if it were End User's own intellectual property.

5.3 The provisions of this Proprietary Information Section shall survive and continue for five (5) years after
the termination of this Agreement.

6. Limited Warranty.

6.1 Datalogic warrants that, under normal use and operation, the Datalogic Product will conform substan­tially to the applicable Documentation for the period specified in the Documentation. During this
period, for all reproducible nonconformities for which Datalogic has been given written notice, Data­logic will use commercially reasonable efforts to remedy nonconformities verified by Datalogic. End
User agrees to supply Datalogic with all reasonably requested information and assistance necessary
to help Datalogic in remedying such nonconformities. For all defects reported to Datalogic within the
warranty period, Datalogic's liability is limited to providing End User with one copy of corrections or
responding to End User's problem reports according to Datalogic's standard assistance practices. Dat­alogic does not warrant that the product will meet End User's requirements or that use of the product
will be uninterrupted or error free, or that Datalogic's remedial efforts will correct any nonconfor­mance. This limited warranty does not cover any product that have been subjected to damage or
abuse, whether intentionally, accidentally, or by neglect, or to unauthorized repair or unauthorized
installation, and shall be void if End User modifies the product, uses the product in any manner other
than as established in the Documentation, or if End User breaches any of the provisions of this Agree­ment.

6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS PROVIDED "AS IS" AND DAT­ALOGIC MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, WRITTEN OR ORAL, WITH
RESPECT TO THE PRODUCT, AND SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MER­CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

7. Infringement.

7.1 Datalogic will defend End User against any claim in a lawsuit that the Datalogic Product furnished
hereunder infringe a United States patent or copyright of a third party and Datalogic will pay any dam­ages finally awarded against End User by a court of competent jurisdiction that are attributable to
such claim or will pay End User's part of any settlement that is attributable to such claim, provided,
that 1) End User notifies Datalogic promptly in writing of the claim, 2) Datalogic controls the defense
or settlement of the claim, and 3) End User cooperates fully with Datalogic in such defense or settle­ment. All notices of a claim should be sent to Datalogic ADC, Legal Department, 959 Terry Street,
Eugene, OR 97402.

7.2 In the defense or settlement of any such claim, Datalogic may, at its option, 1) procure for End User the
right to continue using the Datalogic Product, 2) modify the Datalogic Product so that it becomes non­infringing, 3) replace the Datalogic Product with an equivalent product not subject to such claim, or 4)
provide End User an opportunity to return the Datalogic Product and receive a refund of the purchase
price paid, less a reasonable allowance for use.

7.3 Datalogic shall have no liability to End User for claims of infringement based upon 1) the use of any
Datalogic Product in combination with any product which Datalogic has not either furnished or autho­rized for use with such Datalogic Product 2) the use of any Datalogic Product designed, manufactured,
or modified to the specifications of End User, or 3) End User's modification of the Datalogic Product
without written authorization from Datalogic.

7.4 THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE OBLIGATION CONCERNING CLAIMS OF
PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY INFRINGEMENT, CANCELS AND SUPER­CEDES ANY PRIOR AGREEMENTS, WHETHER ORAL OR WRITTEN, BETWEEN THE PARTIES CONCERN­ING SUCH CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CONTEMPORANEOUS,
OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE PARTIES, WHETHER ORAL OR WRITTEN,
EXCEPT AS SET FORTH IN A FUTURE WRITING SIGNED BY BOTH PARTIES.

8. Limitation Of Liability.

EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE FOR ANY CLAIMS AGAINST END
USER BY ANY OTHER PARTY. IN NO EVENT SHALL DATALOGIC'S LIABILITY FOR DAMAGES, IF ANY,

Software Product Policy

Quick Reference Guide v

WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, STRICT LIABIL­ITY, WARRANTY, OR ANY OTHER BASIS, EXCEED THE PRICE OR FEE PAID BY END USER FOR THE DATA­LOGIC PRODUCT. UNDER NO CIRCUMSTANCES SHALL DATALOGIC BE LIABLE TO END USER OR ANY
THIRD PARTY FOR LOST PROFITS, LOST DATA, INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY
OTHER SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL, PUNITIVE, EXEMPLARY, OR
OTHER SIMILAR DAMAGES, EVEN IF DATALOGIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAM­AGES.

9. Government Restricted Rights; International Use.

9.1 Use, duplication, or disclosure of the Software by the U.S. Government is subject to the restrictions
for computer software developed at private expense as set forth in the U.S. Federal Acquisition Reg­ulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable.

9.2 If End User is using the Datalogic Product outside of the United States, End User must comply with
the applicable local laws of the country in which the Datalogic Product is used, with U.S. export con­trol laws, and with the English language version of this Agreement. The provisions of the "United
Nations Convention on International Sale of Goods" shall not apply to this Agreement.

10. Termination.

10.1Either party may terminate this Agreement or any license granted under this Agreement at any time
upon written notice if the other party breaches any provision of this Agreement.

10.2Upon termination of this Agreement, End User immediately shall cease using any nonembedded
software and shall return to Datalogic or destroy all non-embedded software covered by this Agree­ment, and shall furnish Datalogic with a certificate of compliance with this provision signed by an
officer or authorized representative of End User. For embedded software, End User agrees to sign a
waiver prepared by Datalogic concerning further use of the embedded Software. End User's resumed
or continued use of the embedded Software after termination shall constitute End User's agreement
to be bound by the terms and conditions of this Agreement for such use.

11. General Provisions.

11.1 Entire Agreement; Amendment. This document contains the entire agreement between the parties
relating to the licensing of the Software and supersedes all prior or contemporaneous agreements,
written or oral, between the parties concerning the licensing of the Software. This Agreement may
not be changed, amended, or modified except by written document signed by Datalogic.

11.2 Notice. All notices required or authorized under this Agreement shall be given in writing, and shall be
effective when received, with evidence of receipt. Notices to Datalogic shall be sent to the attention of
Contract Administration, Datalogic ADC, Inc., 959 Terry Street, Eugene, OR 97402, or such other
address as may be specified by Datalogic in writing.

11.3 Waiver. A party's failure to enforce any of the terms and conditions of this Agreement shall not pre­vent the party's later enforcement of such terms and conditions.

11.4 Governing Law; Venue: This Agreement and the rights of the parties hereunder shall be governed by
and construed in accordance with the laws of the State of Oregon U.S.A, without regard to the rules
governing conflicts of law. The state or federal courts of the State of Oregon located in either Mult­nomah or Lane counties shall have exclusive jurisdiction over all matters regarding this Agreement,
except that Datalogic shall have the right, at its absolute discretion, to initiate proceedings in the
courts of any other state, country, or territory in which End User resides, or in which any of End User's
assets are located.

11.5 Attorneys' Fees. In the event an action is brought to enforce the terms and conditions of this Agree­ment, the prevailing party shall be entitled to reasonable attorneys' fees, both at trial and on appeal.

- END -

Software Product Policy

Datalogic reserves the right to ship its products with the latest version of software/firmware available.
This provides our customers with the very latest in Datalogic software technology.
The only exception to this policy is when the buyer has a signed contract with Datalogic that clearly
defines the terms and conditions for making software/firmware changes in products shipped to the
buyer.

Customers Under Software Support

Customers that elect to subscribe to Datalogic Software Maintenance and Support Agreement will
receive 30 days advance notification of: (1) the release of a new software version; and/or (2) discontinua­tion of any prior software version that will no longer be supported. Datalogic will provide maintenance
for a fee that will assist customers in transitioning to the next software version. If a customer is cur­rently using the software version being discontinued, the customer may elect to transition to any one of
the newer versions, depending on the hardware in use.
To arrange for a Software Maintenance and Support Agreement please contact your Datalogic sales per­son.

Software Product Policy

vi Touch TD1100

NOTES

Quick Reference Guide 1

Touch TD1100

Quick Reference Guide

The Touch™ TD1100 series of linear imaging contact readers represent the Datalogic
ADC solution for customers who require a cost-effective solution for close contact bar code
reading without sacrificing quality and performance.

Designed for low throughput applications within multiple markets, the Touch TD1100
readers provide the guarantee of contact reading with an excellent reading performance on
virtually all linear bar codes, including damaged or poorly printed codes.

Small, lightweight and low on energy consumption, the Touch TD1100 readers can still
provide robustness and a 1.5 m / 5.0 ft drop resistance, which is typically included in a high­er range of products.

The Touch readers are available with the option of two different sizes of reading windows:

6.5 cm / 2.6 in (Touch 65) or 9.0 cm / 3.5 in (Touch 90), which benefits the user when

reading either standard or wide bar codes.

The Touch 65/90 Pro readers provide a complete all-in-one multi-interface solution, in­cluding RS-232, USB, Keyboard Wedge, and Wand Emulation; the Touch Lite 65/90
readers provide USB-only or RS-232 / Keyboard Wedge interfaces.

Parts of the Reader

1

2

3

4

1. Indicator Window 3. Scan Window

2. Cable Release Hole 4. Trigger

Holder/Hands-Free Stand

2 Touch TD1100

Holder/Hands-Free Stand

The TD1100 Holder can be used as a hands-free stand. Refer to

Scanning Modes on page 9

for in-

formation about programming the reader for use with the stand.

Figure 1. Hands-Free Stand

nds Free Mode

Setup

Connect/Disconnect Cable

Setup

Quick Reference Guide 3

Connect Host Interface

Keyboard Wedge Interface

K

e

y

b

o

a

r

d

RS-232 Interface

USB Interface

R

S

-

2

3

2

R

S

-

2

3

2

U

S

B

Setup

4 Touch TD1100

Touch and Scan

65°

65°

Programming Bar Codes

Quick Reference Guide 5

Programming Bar Codes

For your convenience, this guide includes the programming bar codes required to configure
the reader for use with different interface (terminal/host) types.

See the Product Reference Guide (PRG) for more complete information about program­ming and configurable features. You can download the latest version of the PRG and any
other available publications for the reader from the website listed on the back cover of this
manual.

Resetting the Standard Product Defaults

If you aren’t sure what programming options are in your reader, or you’ve changed some
options and want the factory settings restored, scan the Factory Default Settings bar code
below. This will copy the factory configuration for the currently active interface to the cur­rent configuration.

Factor y Default Settings

Host Interfaces

Cables may vary depending on system configuration.

Some interfaces require the reader to start in the disabled state when
p

owered on. If additional reader configuration is desired while in this
state, pull the trigger and hold it for five seconds. The reader will
change to a state that allows programming with bar codes.

NOTE

Programming Bar Codes

6 Touch TD1100

RS-232 Interface

To use an RS-232 interface, scan the bar code for the desired RS-232 host type.

Select RS-232 Standard

Select RS-232 Wincor Nixdorf

Select RS-232 OPOS (for use with OPOS/UPOS/JavaPOS)

Programming Bar Codes

Quick Reference Guide 7

USB Interface

The reader attaches directly to a USB host, or a powered USB hub, and is powered by it.
No additional power supply is required. When using a USB interface, the reader auto-de­tects the USB and defaults to the USB Keyboard interface.

Select USB-COM-STD1 (simulates RS-232 standard interface)

Select USB Keyboard (with standard key encoding)

Select USB Alternate Keyboard (with alternate key encoding)

Select USB OEM

1. Download the appropriate USB Com driver from www.datalogic.com.

Programming Bar Codes

8 Touch TD1100

Keyboard Wedge Interface

To use a Keyboard Wedge interface, scan the bar code for the desired keyboard type.

Select KBD-AT

(AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95

w/Standard Key Encoding)

Select KBD-AT-NK

(IBM AT PS2 with standard key encoding but without external kbd.)

Select KBD-AT-ALT

(AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95

w/Alternate Key)

Select KBD-AT-ALT-NK (for IBM AT PS2 with alternate key

encoding but without external keyboard)

Select KBD-XT (PC/XT w/Standard Key Encoding)

Wand Emulation Interface

To use a Wand Emulation interface, scan the bar code below.

Select WAND

Scanning Modes

Quick Reference Guide 9

Scanning Modes

If the interface type is changed, scanner configuration may automati­cally reset to a different Scanning Mode.

The reader can operate in one of several scanning modes:

Trigger Single —

When the trigger is pulled, scanning is activated until one of the following

occurs:

- a programmable duration1 has elapsed

- a label has been read

- the trigger is released
This mode is associated with typical handheld reader operation: when the trigger is pulled,
scanning starts and the product scans until the trigger is released, or a label is read, or the
maximum programmable duration

1

has elapsed.

Trigger Hold Multiple —

When the trigger is pulled, scanning starts and the product scans
until the trigger is released or a programmable duration1 has elapsed. Reading a label does
not disable scanning. Double Read Timeout

2

prevents undesired multiple reads while in

this mode.

Trigger Pulse Multiple —

When the trigger is pulled and released, scanning is activated un­til programmable duration1 has elapsed or the trigger has been pulled again to transition to
another state. Double Read Timeout

2

prevents undesired multiple reads while in this mode.

Flashing —

The reader flashes3 on and off regardless of the trigger status.

Always On —

No trigger pull is required to read a bar code. Scanning is continually on.

Double Read Timeout2 prevents undesired multiple reads while in this mode.

Hands-Free Mode —

No trigger pull is required to read a bar code. Scanning is turned on
automatically when an item is placed in reader’s field of view. If the trigger is pulled, the
reader acts as if in Trigger Single mode. Double Read Timeout prevents undesired multiple
reads while in this mode.

NOTE

1. See the Product Reference Guide (PRG) for additional programmable features, such as Scanning Active Time.

2. Double Read Timeout is also programmed using the PRG.

3. Controlled by Flash On Time and Flash Off Time. Use the PRG to program these options.

Scanning Modes

10 Touch TD1100

Scanning Modes (continued)

Scan Mode = Trigger Single

Scan Mode = Trigger Hold Multiple

Scan Mode = Trigger Pulse Multiple

Scan Mode = Flashing

Scan Mode = Always On

Scan Mode = Hands-Free Mode

Troubleshooting

Quick Reference Guide 11

Troubleshooting

For detailed troubleshooting, refer to the Product Reference Guide.

Problem Possible Cause Possible Solutions

Nothing happens when the trigger
is pulled.

No power to the reader.

Check system power. Ensure power
supply is connected.

Interface or power cables are
loose.

Ensure all cable connections are secure.

LED comes on, but bar code does
not decode.

Reader not programmed for cor­rect bar code type.

Ensure reader is programmed to read
the type of bar code scanned. Refer to
the Product Reference Guide (PRG) for
more information.

Bar code label is unreadable.

Check the label to ensure it is not
defaced. Try scanning another bar code
type.

Distance between reader and
bar code is incorrect.

Move reader closer to or further from
the bar code.

Bar code label is too wide

Move scanner away from bar code
label.

Bar code reading ability has
degraded.

Scan Window has become dirty.

Clean window using a soft, lint-free
cloth dampened with water.

Bar code is decoded but not trans­mitted to the host.

Reader not programmed for the
correct host type.

Scan the appropriate host type bar
code. Refer to the Product Reference
Guide (PRG) for more information.

NOTE

Technical Features

12 Touch TD1100

Technical Features

Item Description

Physical Characteristics

Color

Black; Other colors and custom logo options are available for minimum
quantity purchase.

Dimensions

Touch 65: 16.0 x 8.4 x 5.8 cm / 6.3 x 3.3 x 2.3 in
Touch 90: 17.0 x 10.4 x 6.7 cm / 6.7 x 4.1 x 2.7 in

Weigh t

Touch 65: 130.0 g / 4.6 oz
Touch 90: 153.0 g / 5.4 oz

Electrical Characteristics

Current

Operating (Typical): < 100 mA @ 5 VDC
Standby/Idle (Typical): 20 mA @ 5 VDC
Max 180mA @ 5VDC

Input Voltage 5 VDC +/- 0.5 V

Reading Performance

Imager Sensor Linear Imaging Sensor: Illumination: Red LED 640 nm wavelength

Print Contrast Ratio (Minimum) 25%

Read Angle Pitch: +/- 65º; Roll (Tilt): +/- 45º; Skew (Yaw): +/- 70º

Reading Indicators Beeper (Adjustable Tone); Good Read LED

Resolution
(1D Codes, Maximum)

Touch 65 Minimum Resolution = 4 mil (0.102 mm)
Touch 90 Min Resolution = 5 mil (0.127 mm)

Reading Ranges

Typical Depth Of Field Minimum distance determined by symbol length and scan angle.

Printing resolution, contrast, and ambient light dependent.

Touch 65 Touch 90

Code 39 5 mils: 0 to 5.0 cm (1.97 inches) 0-2.5 cm (0.98 inches)

Code 39 7.5 mils: 0 to 10.0 cm (3.94 inches) 0-8.5 cm (3.35 inches)

Code 39 10 mils: 0 to 15.0 cm (5.91 inches) 0-13.5 cm (5.31 inches)

EAN-13 13 mils: 0 to 20.0 cm (7.87 inches) 0-18.5 cm (7.28 inches)

Technical Features

Quick Reference Guide 13

Item Description

Decoding Capability

1D / Linear Codes

Autodiscriminates all standard 1D codes including GS1 DataBar™ linear
codes.

Stacked Codes

GS1 DataBar Expanded Stacked; GS1 DataBar Stacked; GS1 DataBar
Stacked Omnidirectional

Humidity 5 - 95%

Drop specifications Withstands repeated drops from 1.5 m / 5.0 ft onto a concrete surface

Ambient Light immunity 0 - 20,000 lux

Particulate and Water Sealing IP30

ESD Level 16 kV

Regulatory

LED Emission Class (IEC-62471:2006-07) Exempt Risk Group (RG 0)
Electrical Safety IEC 60950-1 , CAN/CSA C22.2 No. 60950-1-07; UL 60950-1

EMI/RFI

North America (FCC) : Part 15 Class B, Canada ( IC) : ICES-003 Class B,
European Union EMC Directive, Australian (C-tick), Russia (Gost); Korean
KCC; Japan (VCCI)

LED and Beeper Indications

14 Touch TD1100

LED and Beeper Indications

The reader’s beeper sounds and its LED illuminates to indicate various functions or errors on the
reader. A “Green Spot” also lights to indicate a good read. The tables below list these indications.
One exception to the behaviors listed in the tables is that the reader’s functions are programmable,
and may or may not be turned on. For example, certain indications, such as the power-up beep
can be disabled using programming bar code labels. Reference the PRG for a more detailed list.

Ergonomic Recommendations

In order to avoid or minimize the potential risk of ergonomic
injury follow the recommendations below. Consult with your
local Health & Safety Manager to ensure that you are adhering
to your company’s safety programs to prevent employee injury.

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequent

ly within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

Indication LED Beeper

Power-up

LED flashes/blinks on power-up, how­ever, this may be too rapid to view. With a
USB interface, the LED blinks until enu­meration with the host is completed.

Reader beeps four times at highest
frequency and volume upon power­up.

Good Read

LED behavior for this indication is config­urable using the PRG.

One beep at current frequency, vol­ume, mono/bi-tonal setting and dura­tion upon a successful label scan.

ROM Failure 200ms on / 200ms off

Reader sounds one error beep at high­est volume for 200 mS.

Limited Scanning Label
Read

N/A

Reader 'chirps' six times at the highest
frequency and current volume.

Reader Disabled

The LED blinks continuously 100mS on /
900 mS off

N/A

CAUTION

Regulatory Information

Quick Reference Guide 15

Regulatory Information

All models are designed to be compliant with rules and regulations in locations they are sold
and will be labeled as required.

Any changes or modifications to equipment, not expressly approved by Datalogic could
void the user's authority to operate the equipment.

Power Supply

Use only a power supply approved by Datalogic for this product and model. Models require
either a Listed class II or class III with a Limited Power Source(LPS) which supplies power
directly to the reader. For the safety certification to be valid, class III input power sources
must be IEC/EN60950-1 (EN 60335-series, EN 60065 or relevant) approved.

Argentina Power Statement

Atencíon

Características de la fuente de alim

entación eléctrica.

Input: 100 - 240 VAC Output: 5 VDC

Max Current: 0.35 Amps Power Out: 12.5 Watts

NOTE

For USB Power Off Terminal applications, attach to USB 1.0, 1.1, 2.0
or 3.0 host device only.

Entrada:

100 - 240 Vca
min .35A 50-60 Hz

Salida:

+5VDC, máx 2.5A
(+)Positivo al centro

Utilice en su red solo fuentes certificadas en Argentina.

El uso de fuentes de alimentación no compatibles puede resultar en riesgo de incendio o de choque
eléctrico para el usuario.

Regulatory Information

16 Touch TD1100

Radio Frequency Interference Requirements

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential instal­lation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. However there is no guarantee that interference will not occur in a particular
installation. If the equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

• Re-orient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Radio Frequency Interference Requirements - Canada

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Reader Labeling

The label is shown here to illustrate its location only. Please view the labels on your product for
actual details.

CAUTION

The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

Tested to comply
with FCC Standards

FOR HOME OR OFFICE USE

Regulatory Information

Quick Reference Guide 17

China RoHS Table of Restricted Elements

China RoHS

㒊௳ྡ⛠

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

Chromium

(Cr(VI))

Polybrominated

biphenyls

(PBB)

Polybrominated

diphenyl ethers

(PBDE)

᭷ẘ᭷ᐖ≀峐ᡈඖ⣲

PART

摭

ợ

擱

භ௴撔

ከ㹜俼劗

ከ㹜Ḵ劗慂

Cable

⭥

㔶

X O O O O O

Printed Circuit Board Assy

⭥䐟ᶯ㓴

X O O O O O

Assembly, Module

ݹᆖ㓴Ԧ



X O O O O O

Power Supply

⭥Ⓚ

X O O O O O

O





௦⾲Ṉ䥵㒊௳ⓗᡤ᭷ᆒ峐㛸㕁󰵶㇨⏓䘬宍䥵㚱㭺㚱⭛䈑峐⛯ỶḶ󰵶⋶Ṣ㮹ℙ␴⚥ᾉ〗ṏ󰵣悐ᡤ栩ⶫⓗ

ࠓ䓝⫸ᾉ〗ṏ⑩󰵶㚱㭺㚱⭛䈑峐䘬旸慷天㯪˫(SJ/T 11363-2006) 奬⭂䘬旸慷ࠋ

X:௦⾲

Ṉ䥵㒊௳ᡤ⏝ⓗᆒ峐㛸㕁󰵶, ⮳ᑡ᭷୍䰣ᮦᩱ඼ᡤྵⓗ᭷ẘ᭷ᐖ≀峐檀Ḷ󰵶⋶Ṣ㮹ℙ␴⚥ᾉ〗ṏ󰵣悐ᡤ栩ⶫⓗ

ࠓ䓝⫸ᾉ〗ṏ⑩󰵶㚱㭺㚱⭛䈑峐䘬旸慷天㯪˫(SJ/T 11363-2006) 奬⭂䘬旸㔞

EFUP determined by “Look-up Method” (scanner).ġġ䍗ᾅἧ䓐㛇旸⍾⅛Ḷ“㞍堐㱽”㸦㈓㍷Ẓ炸

Waste Electrical and Electronic Equipment (WEEE) Statement

Regulatory Information

18 Touch TD1100

WEEE Statement

English

For information about the disposal of Waste Electrical and Electronic Equipment
(WEEE), please refer to the website at www.datalogic.com.

Italian

Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche
consultare il sito Web www.datalogic.com.

French

Pour toute information relative à l’élimination des déchets électroniques (WEEE),
veuillez consulter le site internet www.datalogic.com.

German

Informationen zur Entsorgung von Elektro- und Elektronik- Altgeräten (WEEE) erhalten
Sie auf der Webseite www.datalogic.com.

Spanish

Si desea información acerca de los procedimientos para el desecho de los residuos del
equipo eléctrico y electrónico (WEEE), visite la página Web www.datalogic.com.

Portuguese

Para informações sobre a disposição de Sucatagem de Equipamentos Elétricos e
Eletrônicos (WEEE -Waste Electrical and Electronic Equipment), consultar o site web
www.datalogic.com.

Chinese

有关处理废弃电气电子设备

(WEEE)

的信息， 请参考

Datalogic

公司的网站

www.datalogic.com

。

Japanese

廃電気電子機器

(WEEE)

の処理についての関連事項は

Datalogic

のサイト

www.datalogic.com

をご参照下さい。

Regulatory Information

Quick Reference Guide 19

Datalogic ADC Limited Factory Warranty

Warranty Coverage

Datalogic warrants to Customer that Datalogic's products will be free from defects in ma­terials and workmanship for a period of 5 years from product shipment.

This warranty does not extend to batteries and cables. As consumable items batteries and
cables carry a 90 day warranty from time of purchase for DOA (dead on arrival) defects. In
order to obtain service under this Warranty, Customer must notify Datalogic of the claimed
defect before the expiration of the Warranty period and obtain from Datalogic a return au­thorization number for return of the product to designated Datalogic service center. If Da­talogic determines Customer’s claim is valid, Datalogic will repair or replace product
without additional charge for parts and labor. Customer shall be responsible for packaging
and shipping the product to the designated Datalogic service center, with shipping charges
prepaid. Datalogic shall pay for the return of the product to Customer if the shipment is to
a location within the country in which the Datalogic service center is located. Customer
shall be responsible for paying all shipping charges, duties,taxes, and any other charges for
products returned to any other locations.

Datalogic ADC (“Datalogic”) hardware products are warranted against defects in material
and workmanship under normal and proper use. The liability of Datalogic under this war­ranty is limited to furnishing the labor and parts necessary to remedy any defect covered by
this warranty and restore the product to its normal operating condition. Repair or replace­ment of product during the warranty does not extend the original warranty term. Products
are sold on the basis of specifications applicable at the time of manufacture and Datalogic
has no obligation to modify or update products once sold.

If Datalogic determines that a product has defects in material or workmanship, Datalogic
shall, at its sole option repair or replace the product without additional charge for parts and
labor, or credit or refund the defective products duly returned to Datalogic. To perform re­pairs, Datalogic may use new or reconditioned parts, components, subassemblies or prod­ucts that have been tested as meeting applicable specifications for equivalent new material
and products. Customer will allow Datalogic to scrap all parts removed from the repaired
product. The warranty period shall extend from the date of shipment from Datalogic for
the duration published by Datalogic for the product at the time of purchase (Warranty pe­riod). Datalogic warrants repaired hardware devices against defects in workmanship and
materials on the repaired assembly for a 90 day period starting from the date of shipment
of the repaired product from Datalogic or until the expiration of the original warranty pe­riod, whichever is longer. Datalogic does not guarantee, and it is not responsible for, the
maintenance of, damage to, or loss of configurations, data, and applications on the repaired
units and at its sole discretion can return the units in the “factory default” configuration or
with any software or firmware update available at the time of the repair (other than the firm­ware or software installed during the manufacture of the product). Customer accepts re­sponsibility to maintain a back up copy of its software and data.

Warranty Claims Process

In order to obtain service under the Factory Warranty, Customer must notify Datalogic of
the claimed defect before the expiration of the applicable Warranty period and obtain from
Datalogic a return authorization number (RMA) for return of the product to a designated
Datalogic service center. If Datalogic determines Customer’s claim is valid, Datalogic will
repair or replace product without additional charge for parts and labor. Customer shall be

Regulatory Information

20 Touch TD1100

responsible for packaging and shipping the product to the designated Datalogic service center,
with shipping charges prepaid. Datalogic shall pay for the return of the product to Customer if
the shipment is to a location within the country in which the Datalogic service center is located.
Customer shall be responsible for paying all shipping charges, duties, taxes, and any other charges
for products returned to any other locations. Failure to follow the applicable RMA policy, may
result in a processing fee. Customer shall be responsible for return shipment expenses for products
which Datalogic, at its sole discretion, determines are not defective or eligible for warranty repair.

Warranty Exclusions

The Datalogic Factory Warranty shall not apply to:

(i) any product which has been damaged, modified, altered, repaired or upgraded by other

than Datalogic service personnel or its authorized representatives;

(ii) any claimed defect, failure or damage which Datalogic determines was caused by faulty

operations, improper use, abuse, misuse, wear and tear, negligence, improper storage or
use of parts or accessories not approved or supplied by Datalogic;

(iii) any claimed defect or damage caused by the use of product with any other instrument,

equipment or apparatus;

(iv) any claimed defect or damage caused by the failure to provide proper maintenance,

including but not limited to cleaning the upper window in accordance with product
manual;

(v) any defect or damage caused by natural or man-made disaster such as but not limited to

fire, water damage, floods, other natural disasters, vandalism or abusive events that would
cause internal and external component damage or destruction of the whole unit, consum

-

able items;

(vi) any damage or malfunctioning caused by non-restoring action as for example firmware or

software upgrades, software or hardware reconfigurations etc.;

(vii) the replacement of upper window/cartridge due to scratching, stains or other degradation

and/or

(viii) any consumable or equivalent (e.g., cables, power supply, batteries, keypads, touch screen,

triggers etc.).

No Assignment

Customer may not assign or otherwise transfer its rights or obligations under this warranty except
to a purchaser or transferee of product. No attempted assignment or transfer in violation of this
provision shall be valid or binding upon Datalogic.

DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EX­PRESS OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUD­ING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGE­MENT. DATALOGIC SHALL NOT BE LIABLE FOR ANY DAMAGES SUSTAINED BY
CUSTOMER ARISING FROM DELAYS IN THE REPLACEMENT OR REPAIR OF
PRODUCTS UNDER THE ABOVE. THE REMEDY SET FORTH IN THIS WARRANTY
STATEMENT IS THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY FOR WAR­RANTY CLAIMS. UNDER NO CIRCUMSTANCES WILL DATALOGIC BE LIABLE TO
CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY INCIDEN­TAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT DAMAGES RE­GARDLESS OF WHETHER DATALOGIC HAD ADVANCE NOTICE OF THE
POSSIBILITY OF SUCH DAMAGES.

Services and Support

Quick Reference Guide 21

Risk of Loss

Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic
shall assume risk of loss or damage for product in Datalogic’s possession. In the absence of
specific written instructions for the return of product to Customer, Datalogic will select the
carrier, but Datalogic shall not thereby assume any liability in connection with the return
shipment.

Services and Support

Datalogic provides several services as well as technical support through its website. Log on
to

www.datalogic.com

and click on the links indicated for further information.

Products

Search through the links to arrive at your product page where you can download specific

Manuals

and

Software & Utilities

, including:

•

Datalogic Aladdin™

, a multi-platform utility program that allows for both RS-232
and USBCOM communications interfacing. The GUI-based application provides
an easy mechanism for setting scanner configuration, as well as configuration bar
code printing.

Service & Support

•

Technical Support

- Product documentation and programming guides and Techni-

cal Support Department in the world

•

Service Programs

- Warranty Extensions and Maintenance Agreements

•

Repair Services

- Flat Rate Repairs and Return Material Authorization (RMA)

Repairs

•

Downloads

– Manuals & Documentation, Data Sheets, Product Catalogues, etc.

Contact Us

• Information Request Form and Sales & Service Network

Services and Support

22 Touch TD1100

NOTES

DECLARATION OF CONFORMITY

La presente dichiarazione di conformità è rilasciata sotto la responsabilità esclusiva di Datalogic ADC Srl per:
This Declaration of Conformity is issued under the sole responsibility of Datalogic ADC Srl for:
Cette déclaration de conformité est établie sous la seule responsabilité de Datalogic Srl pour:
Diese Konformitätserklärung wird unter der alleinigen Verantwortung des Datalogic ADC Srl erteilt für:
Esta declaración de conformidad se expide bajo la exclusiva responsabilidad de Datalogic ADC Srl para:

Touch, Model TD1100, Bar Code Reader

sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:

2004/108/EC - EMC Directive

2011/65/EU - RoHS Directive (8 June 2011)

Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla sicurezza dei prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility and product safety.
Basée sur la législation des Etates membres relative à la compatibilté électromagnétique et à la sécurité des produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit und
Produktsicherheit entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad electromagnética y las
Medidas de seguridad relativas al producto.

Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:

Datalogic ADC, Inc.
959 Terry St.
Eugene, OR 97402 USA

EC-79

Rev.: 1

Pag.: 1 di 1

e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos

EN 55022 (C

LASS

B ITE), D

ECEMBER

2010

L

IMITS AND METHODS OF MEASUREMENTS OF RADIO DISTURBANCE

C

HARACTERISTICS OF INFORMATION TECHNOLOGY EQUIPMENT

EN 55024:2010

I

NFORMATION TECHNOLOGY EQUIPMENT

- I

MMUNITY CHARACTERISTICS LIMITS AND

M

ETHODS

OF M

EASUREMENT

EN 60950-1, A

PRIL

2006

+11:2009+A1:2010+A12:2011

I

NFORMATION TECHNOLOGY EQUIPMENT

- S

AFETY

- P

ART

1 : G

ENERAL REQUIREMENTS

EN 50581, S

EPTEMBER

2012 :

T

ECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC

P

RODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES

Eugene, Oregon USA, April, 2013

Brad West

Vice President - Global Supply Chain Operations

13

©2012-2014 Datalogic, Inc. • All rights reserved.
Datalogic and the Datalogic logo are registered trademarks
of Datalogic S.p.A. in many countries, including the U.S.A.
and the E.U.

Datalogic ADC, Inc.

959 Terry Street | Eugene |OR 97402 | USA
Telephone: [phone]

|

Fax: [phone]

www.datalogic.com

820049914 (Rev C) September 2014