Datalogic Joya R2U User Manual
Datalogic Joya
TM
R2U
“Ready to Use”
User’s manual
Datalogic Mobile S.r.l.
Via S. Vitalino 13
40012 - Lippo di Calderara di Reno
Bologna - Italy
Datalogic Joya™ - User's Manual
Ed.: 12/2008
ALL RIGHTS RESERVED
The Datalogic name and logo are registered trademarks of Datalogic S.p.A. in many
countries.
The JOYA name and logo are a trademarks of Datalogic Mobile S.r.l.
All other brand and product names mentioned herein are for identification purposes only
and may be trademarks or registered trademarks of their respective owners.
Datalogic reserves the right to make modifications and improvements without prior
notification.
Datalogic shall not be liable for technical or editorial errors or omissions contained herein,
nor for incidental or consequential damages resulting from the use of this material.
© 2008 Datalogic Mobile S.r.l. • All rights reserved. • Protected to the fullest extent under
U.S. and international laws. • Copying, or altering of this document is prohibited without
express written consent from Datalogic Mobile S.r.l.
iii
CONTENTS
DATALOGIC END USER LICENSE AGREEMENT...........................V
REFERENCES.................................................................................. VII
Conventions .......................................................................................vii
Reference Documentation .................................................................vii
SAFETY REGULATIONS................................................................VIII
General Safety Rules........................................................................viii
Bluetooth® Approval ......................................................................... viii
Laser Safety........................................................................................ix
LED Class ......................................................................................... xiii
Radio Compliance.............................................................................xiv
FCC Compliance................................................................................xv
SAR Compliance................................................................................xv
Wireless and Radio Frequencies Warnings......................................xvi
Patents............................................................................................ xviii
WEEE Compliance.......................................................................... xviii
GENERAL VIEW...............................................................................XX
1 INTRODUCTION................................................................................. 1
1.1 Datalogic Joya™ Description.............................................................. 1
1.2 Model Description ............................................................................... 1
1.3 Package Contents...............................................................................2
1.4 Accessories.........................................................................................2
2 CONNECTIONS.................................................................................. 3
2.1 USB Connection.................................................................................. 3
2.2 WLAN Connection............................................................................... 4
2.3 WPAN Connections ............................................................................ 6
3 USE AND FUNCTIONING.................................................................. 7
3.1 Startup................................................................................................. 7
3.1.1 Using the Stylus (available only on Joya+TM)...................................... 8
3.2 Data Capture.......................................................................................9
3.2.1 Laser Data Capture.............................................................................9
3.3 Description of the Keys..................................................................... 10
3.3.1 Resetting the Joya™.........................................................................11
3.4 Status Indicators ............................................................................... 12
3.4.1 Taskbar ............................................................................................. 12
3.5 Data Capture Configuration............................................................... 13
3.5.1 Configure........................................................................................... 13
3.5.2 Capture.............................................................................................. 17
3.6 Control Panel .................................................................................... 18
3.6.1 Registry............................................................................................. 18
3.6.2 Files Admin ....................................................................................... 20
3.6.3 Wireless Communications................................................................. 22
3.6.4 Using Summit Radio Card Utility.......................................................23
3.6.5 Stylus Calibration (available only on Joya+™).................................. 28
iv
3.7
Windows Connections....................................................................... 30
3.7.1 Microsoft® ActiveSync®.................................................................... 30
3.7.2 Bluetooth® Manager Device Setup................................................... 32
3.7.3 FTP Server Setup.............................................................................. 35
3.8 Backup Directory File Management.................................................. 36
3.9 Firmware Update............................................................................... 37
4 MAINTENANCE................................................................................ 40
4.1 Charging the Battery Pack ................................................................ 40
4.2 Replacing the Battery Pack...............................................................41
4.3 Cleaning the Mobile Computer.......................................................... 44
5 JOYATM CRADLE DISPENSER........................................................ 45
5.1 Introduction ....................................................................................... 45
5.2 Accessories.......................................................................................45
5.3 Installation requirements................................................................... 46
5.3.1 Base Unit Construction Details ......................................................... 47
5.3.2 JoyaTM Cradle Dispenser Supports................................................... 48
5.3.3 Internal Cabinet Space and Openings .............................................. 49
5.3.4 Anchoring and Maintenance Issues.................................................. 49
5.3.5 Power Supply Positioning and Cooling............................................. 49
5.3.6 AC Power Cabling.............................................................................50
5.3.7 Wiring................................................................................................ 51
5.3.8 Cable to Power Supply Connection................................................... 52
5.3.9 Affixing Cables to Cabinet.................................................................53
5.3.10 Safety Precautions............................................................................ 53
5.3.11 Connection to AC Line Voltage......................................................... 54
5.4 JoyaTM cradle dispenser firmware..................................................... 55
5.4.1 APC installation.................................................................................55
5.4.2 Starting program................................................................................ 55
5.4.3 Reading firmware version.................................................................. 56
5.4.4 Firmware update procedure.............................................................. 57
5.5 Joya
TM
– Joya
TM
cradle dispenser connection................................... 57
5.6 Configuration.....................................................................................58
5.7 Use and functioning .......................................................................... 58
6 JOYA
TM
/JOYA+
TM
TECHNICAL FEATURES................................. 59
6.1 Technical Data.................................................................................. 59
7 TEST CODES ................................................................................... 61
GLOSSARY...................................................................................... 64
INDEX ............................................................................................... 66
v
DATALOGIC END USER LICENSE AGREEMENT
BY DOWNLOADING OR INSTALLING THE SOFTWARE, OR BY USING DATALOGIC
EQUIPMENT THAT INCLUDES THIS SOFTWARE, YOU ARE CONSENTING TO BE
BOUND BY THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF
THIS AGREEMENT, THEN DO NOT DOWNLOAD, INSTALL, USE THE SOFTWARE
NOR DATALOGIC EQUIPMENT.
The following terms and conditions govern your use of the Software except to the extent that a particular
program (a) is the subject of a separate written agreement with Datalogic or (b) includes a separate “clickon” license agreement as part of the installation and/or download process. Should a conflict arise between
the provisions of the foregoing documents, the order of precedence shall be (1) the written agreement, (2)
the click-on agreement, and (3) this agreement (“Agreement”).
1. License. Subject to the terms and conditions of and except as otherwise provided in this Agreement,
Datalogic Mobile S.r.l. (“Datalogic”) a nd its suppliers grant to Custo mer (“Customer”) a nonexclusive a nd
nontransferable license to use the specific program modules, feature set(s) or feature(s) in object code
form only as well as associated media, printed materials and “online” or electronic documentation (the
“Software”) for which Customer has paid, if required, the license fees. The Software is licensed not sold.
The license shall be subject to each of the following limitations:
• Unless otherwise expressly provided in the documentation, Customer shall use the Software solely
as embedded in, for execution on, or (where the applicable documentation permits installation on
non-Datalogic equipment) for communication with Datalogic equipment owned or leased by
Customer;
• Customer’s use of the Software shall be limited to use on a single hardware chassis, on a single
central processing unit, as applicable, or use on such greater number of chassis or central
processing units as Customer may have paid Datalogic the required license fee; and
• Customer’s use of the Software shall also be limited, as applicable and set forth in Customer’s
purchase order or in Datalogic’s product catalog, user documentation, or web site, to a maximum
number of (a) seats (i.e. users with access to the installed Software), (b) concurrent users,
sessions, ports, and/or issued and outstanding IP addresses, and/or (c) central processing unit
cycles or instructions per second. Customer’s use of the Software shall also be limited by any other
restrictions set forth in Customer’s purchase order or in Datalogic’s product catalog, user
documentation or web site for the Software.
2. General Limitations. Except as otherwise expressly provided under this Agreement, Customer shall
have no right, and Customer specifically agrees not to (i) transfer, assign or sublicense its license rights to
any other person, or use the Software on unauthorized or secondhand Datalogic equipment, and any such
attempted transfer, assignment or sublicense shall be void; (ii) correct errors to or otherwise modify or
adapt the Software or create derivative works based upon the Software, or to permit third parties to do the
same; or (iii) decompile, decrypt, reverse engineer, disassemble or otherwise reduce the Software to
human-readable form to gain access to trade secrets or confidential information in the Software. To the
extent required by law, at Customer's request, Datalogic shall provide Customer with the interface
information needed to achieve interoperability between the Software and another independently created
program, upon payment of Datalogic's applicable fee. Customer shall observe strict obligations of
confidentiality with respect to such information.
3. Upgrades and Additional Copies. For purposes of this Agreement, “Software” shall include (and the
terms and conditions of this Agreement shall apply to) any upgrades, updates, bug fixes or modified
versions (collectively, “Upgrades”) or backup copies of the Software licensed or provided to Customer by
Datalogic or an authorized distributor for which Customer has paid the applicable license fees.
Notwithstanding any other provision of this Agreement: (1) customer has no license or right to use any
such additional copies or upgrades unless customer, at the time of acquiring such copy or upgrade,
already holds a valid license to the original Software and has paid the applicable fee for the upgrade, if
required; (2) use of upgrades is limited to Datalogic equipment for which customer is the original end user,
purchaser or lessee or who otherwise holds a valid license to use the Software which is being upgraded;
and (3) use of additional copies is limited to backup purposes only.
4. Proprietary Notices. Customer agrees to maintain and reproduce all copyright and other proprietary
notices on all copies, in any form, of the Software in the same form and manner that such copyright and
other proprietary notices are included on the Software. Except as expressly authorized in this Agreement,
Customer shall not make any copies or duplicates or any Software without the prior written permission of
Datalogic. Customer may make such backup copies of the Software as may be necessary for Customer’s
lawful use, provided Customer affixes to such copies all copyright, confidentiality, and proprietary notices
that appear on the original.
5. Protection of Information. Customer agrees that aspects of the Software and associated
documentation, including the specific design and structure of individual programs, constitute trade secrets
vi
and/or copyrighted material of Datalogic. Customer shall not disclose, provide, or otherwise make
available such trade secrets or copyrighted material in any form to any third party without the prior written
consent of Datalogic. Customer shall implement reasonable security measures to protect such trade
secrets and copyrighted material. Software and documentation shall remain solely property of Datalogic.
6. Limited Warranty. If Customer obtained the Software directly from Datalogic, then Datalogic warrants that
during the Warranty Period (as defined below): (i) the media on which the Software is furnished will be free of
defects in materials and workmanship under normal use; and (ii) the Software will substantially conform to its
published specifications. The “Warranty Period” means a period beginning on the date of Customer’s receipt of
the Software and ending on the later of (a) ninety (90) days from the date of initial shipment of the Software by
Datalogic, or (b) the end of the minimum period required by the law of the applicable jurisdiction. The limited
warranties extend only to Customer as the original licensee. Customer's sole and exclusive remedy and the
entire liability of Datalogic and its suppliers under these limited warranties will be, at Datalogic’s sole option,
repair or replacement of the Software if reported (or, upon request, returned) to Datalogic. Except as expressly
granted in this Agreement, the Software is provided AS IS and with all faults. Datalogic does not warrant that
the Software is error free or that Customer will be able to operate the Software without problems or
interruptions. In addition, due to the continual development of new techniques for intruding upon and attacking
networks, Datalogic does not warrant that the Software or any equipment, system or network on which the
Software is used will be free of vulnerability to intrusion or attack. This warranty does not apply if the Software
(a) is licensed for beta, evaluation, testing or demonstration purposes for which Datalogic does not receive a
license fee, (b) has been altered, except by Datalogic, (c) has not been installed, operated, repaired, or
maintained in accordance with instructions supplied by Datalogic, (d) has been subjected to abnormal physical
or electrical stress, misuse, negligence, or accident, or (e) is used in ultra hazardous activities. If Customer
obtained the Software from a Datalogic reseller, the terms of any warranty shall be as provided by such
distributor, and Datalogic provides Customer no warranty with respect to such Software. The Software may
contain support for programs written in Java. Java technology is not fault tolerant and is not designed,
manufactured, or intended for use or resale as online control equipment in hazardous environments requiring
fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication
systems, air traffic control, direct life support machines, or weapons systems, in which the failure of Java
technology could lead directly to death, personal injury, or severe physical or environmental damage. Microsoft
Inc. has contractually obligated Datalogic to make this disclaimer.
7. Disclaimer of Warranties. Except as specified in this warranty, all expressed or implied conditions,
representations, and warranties including, without limitation, any implied warranty or condition of
merchantability, fitness for a particular purpose, non-infringement, satisfactory quality or arising from a course
of dealing, usage, or trade practice, are hereby excluded to the extent allowed by applicable law. To the extent
that an implied warranty cannot be excluded, such warranty is l imited in dur ation to the w arranty peri od.
8. Disclaimer of Liabilities. In no event will Datalogic or its suppliers be liable for any lost revenue, profit,
or data, or for special, indirect, consequential, incidental, or punitive damages however caused and arising
out of the use of or inability to use the Software even if Datalogic has been advised of the possibility of
such damages. In no event shall Datalogic or its suppliers' liability to custom er, whether in contract, tort
(including negligence), or otherwise, exceed the price paid by customer. The foregoing limitations shall
apply even if the above-stated warranty fails of its essential purpose.
9. Term and Termination. This Agreement is effective until terminated. Customer may terminate this
Agreement at any time by destroying all copies of Software including any documentation. Customer’s
license rights under this Agreement will terminate immediately without notice from Datalogic if Customer
fails to comply with any provision of this Agreement. Upon termination, Customer must destroy all copies
of Software in its possession or control.
10. Customer Records. Customer grants to Datalogic and its independent accountants the right to
examine Customer’s books, records and accounts during Customer’s normal business hours to verify
compliance with this Agreement. In the event such audit discloses non-compliance with this Agreement,
Customer shall promptly pay to Datalogic the appropriate license fees.
11. General Provisions. This Agreement shall be governed by and construed in accordance with the laws
of Italy. All disputes arising out of or in connection with this Agreement will be subject to the exclusive
jurisdiction of the competent Court of the place where Datalogic has its registered office. If any portion
hereof is found to be void or unenforceable, the remaining provisions of this Agreement shall remain in full
force and effect. Except as expressly provided herein, this Agreement constitutes the entire agreement
between the parties with respect to the license of the Software and supercedes any conflicting or
additional terms contained in the purchase order.
vii
REFERENCES
CONVENTIONS
This manual uses the following conventions:
“User” refers to anyone using a Datalogic Joya™ mobile computer.
“Mobile computer” and "Datalogic Joya™" refer to Datalogic Joya™ mobile
computer.
“You” refers to the System Administrator or Technical Support person using this
manual to install, configure, operate, maintain or troubleshoot a Datalogic
Joya™ mobile computer.
“Cradle” refers to Datalogic Joya™ Cradle Dispenser.
REFERENCE DOCUMENTATION
For further information regarding Datalogic Joya™ refer to the SDK Help onLine.
viii
SAFETY REGULATIONS
NOTE
Read this manual carefully before performing any type of
connection to the Datalogic Joya™ mobile computer.
The user is responsible for any damages caused by incorrect
use of the equipment or by inobservance of the indication
supplied in this manual.
GENERAL SAFETY RULES
− Use only the components supplied by the manufacturer for the specific
Datalogic Joya™ being used.
− Do not attempt to disassemble the Datalogic Joya™ mobile computer, as it
does not contain parts that can be repaired by the user. Any tampering will
invalidate the warranty.
− When replacing the battery pack or at the end of the operative life of the
Datalogic Joya™ mobile computer, disposal must be performed in
compliance with the laws in force.
− Before using the device and the battery pack, see par. 4.2 and read every
warnings about the device and the battery pack.
− Do not submerge the Datalogic Joya™ in liquid products.
− The Datalogic Joya™ is designed and labelled to be compliant with laws,
rules and regulations in force in the countries where it is sold.
− For further information, refer to this manual and to the Datalogic Mobile
web site: www.mobile.datalogic.com
.
BLUETOOTH® APPROVAL
This product is equipped with the following certified Bluetooth® module:
Product Name
: Datalogic controller subsystem based on LBMALCS2 MURATA
module for Windows CE and Windows Mobile for portable barcode readers
application
Bluetooth ID
: B016407
Product ID
: DLBTLCS2
ix
LASER SAFETY
The laser light is visible to the human eye and is emitted from the window
indicated in the figure.
I D F E
La luce laser è
visibile all'occhio
umano e viene
emessa dalla
finestra indicata
nella figura.
Die Laserstrahlung
ist für das
menschliche Auge
sichtbar und wird am
Strahlaustrittsfenster
ausgesendet (siehe
Bild).
Le rayon laser est
visible à l'oeil nu et il
est émis par la
fenêtre désignée sur
l'illustration dans la
figure.
La luz láser es
visible al ojo
humano y es
emitida por la
ventana indicada
en la figura.
I D F E
LUCE LASER
NON FISSARE IL
FASCIO
APPARECCHIO
LASER DI CLASSE 2
MASSIMA POTENZA
DI USCITA: 2mW
LUNGHEZZA D'ONDA
EMESSA: 650nm
CONFORME A EN
60825-1 (2001)
LASERSTRAHLUNG
NICHT IN DER STRAHL
BLINKEN
PRODUKT DER
LASERKLASSE 2
MAXIMALE
AUSGANGLEISTUNG:
2mW WELLENLÄNGE:
650nm
ENTSPR. EN 60825-1
(2001)
RAYON LASER
EVITER DE
REGARDER
LE RAYON
APPAREIL LASER DE
CLASSE 2
PUISSANCE DE
SORTIE: 2mW
LONGUER D'ONDE
EMISE: 650nm
CONFORME A EN
60825-1 (2001)
RAYO LÁSER
NO MIRAR FIJO EL
RAYO
APARATO LÁSER DE
CLASE 2
MÁXIMA POTENCIA
DE SALIDA: 2mW
LONGITUD DE ONDA
EMITIDA: 650nm
CONFORME A EN
60825-1
(2001)
x
ENGLISH
The following information is provided to comply with the rules imposed by
international authorities and refers to the correct use of your mobile computer.
STANDARD LASER SAFETY REGULATIONS
This product conforms to the applicable requirements of both CDRH 21 CFR
1040 Subchapter J and EN 60825-1:2001 at the date of manufacture.
For installation, use and maintenance, it is not necessary to open the device.
CAUTION
Do not attempt to open or otherwise service any
components in the optics cavity. Opening or servicing
any part of the optics cavity by unauthorized personnel
may violate laser safety regulations. The optics system is
a factory only repair item.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in exposure to hazardous visible laser light.
The product utilizes a low-power laser diode. Although staring directly at the
laser beam momentarily causes no known biological damage, avoid staring at
the beam as one would with any very strong light source, such as the sun.
Avoid that the laser beam hits the eye of an observer, even through reflective
surfaces such as mirrors, etc.
CAUTION
Use of optical systems with the scanner will increase eye
hazard. Optical instruments include binoculars,
microscopes, eye glasses and magnifying glasses.
ITALIANO
Le seguenti informazioni vengono fornite dietro direttive delle autorità
internazionali e si riferiscono all’uso corretto del terminale.
NORMATIVE STANDARD PER LA SICUREZZA LASER
Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla
data di produzione: CDRH 21 CFR 1040 sezione J e EN 60825-1:2001.
Non si rende mai necessario aprire l’apparecchio per motivi di installazione,
utilizzo o manutenzione.
CAUTION
Non tentare di accedere allo scomparto contenete i
componenti ottici o di farne la manutenzione.
L’apertura dello scomparto, o la manutenzione di qualsiasi
parte ottica da parte di personale non autorizzato, potrebbe
violare le norme della sicurezza. Il sistema ottico può essere
riparato solamente alla fabbrica.
xi
ATTENZIONE
L'utilizzo di procedure o regolazioni differenti da quelle
descritte nella documentazione può provocare
un'esposizione pericolosa a luce laser visibile.
Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti
danni riportati dall’occhio umano in seguito ad una esposizione di breve durata,
evitare di fissare il raggio laser così come si eviterebbe qualsiasi altra sorgente
di luminosità intensa, ad esempio il sole. Evitare inoltre di dirigere il raggio laser
negli occhi di un osservatore, anche attraverso superfici riflettenti come gli
specchi.
CAUTION
L’uso di strumenti ottici assieme allo scanner può aumentare
il pericolo di danno agli occhi. Tali strumenti ottici includono
cannocchiali, microscopi, occhiali e lenti di ingrandimento.
DEUTSCH
Die folgenden Informationen stimmen mit den Sicherheitshinweisen überein, die
von internationalen Behörden auferlegt wurden, und sie beziehen sich auf den
korrekten Gebrauch vom Terminal.
NORM FÜR DIE LASERSICHERHEIT
Dies Produkt entspricht am Tag der Herstellung den gültigen EN 60825-1:2001
und CDRH 21 CFR 1040 Subchapter J Normen für die Lasersicherheit.
Es ist nicht notwendig, das Gerät wegen Betrieb oder Installations-, und
Wartungs-Arbeiten zu öffnen.
CAUTION
Unter keinen Umständen darf versucht werden, die
Komponenten im Optikhohlraum zu öffnen oder auf
irgendwelche andere Weise zu warten. Das Öffnen bzw.
Warten der Komponenten im Optikhohlraum durch
unbefugtes Personal verstößt gegen die LaserSicherheitsbestimmungen. Das Optiksystem darf nur
werkseitig repariert werden.
ACHTUNG
Jegliche Änderungen am Gerät sowie Vorgehensweisen,
die nicht in dieser Betriebsanleitung beschrieben werden,
können ein gefährliches Laserlicht verursachen.
Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine Augenschäden von
kurzen Einstrahlungen bekannt sind, sollten Sie es vermeiden für längere Zeit in
den Laserstrahl zu schauen, genauso wenig wie in starke Lichtquellen (z.B. die
xii
Sonne). Vermeiden Sie es, den Laserstrahl weder gegen die Augen eines
Beobachters, noch gegen reflektierende Oberflächen zu richten.
CAUTION
Die Verwendung von Optiksystemen mit diesem Scanner
erhöht die Gefahr einer Augenbeschädigung.
Zu optischen Instrumenten gehören unter anderem
Ferngläser, Mikroskope, Brillen und Vergrößerungsgläser.
FRANÇAIS
Les informations suivantes sont fournies selon les règles fixées par les autorités
internationales et se réfèrent à une correcte utilisation du terminal.
NORMES DE SECURITE LASER
Ce produit est conforme aux normes de sécurité laser en vigueur à sa date de
fabrication: CDRH 21 CFR 1040 sous-chapitre J et EN 60825-1:2001.
Il n’est pas nécessaire d’ouvrir l’appareil pour l’installation, l’utilisation ou
l’entretien.
CAUTION
Ne pas essayer d’ouvrir ou de réparer les composants de la
cavité optique. L’ouverture de la cavité optique ou la
réparation de ses composants par une personne non
qualifiée peut entraîner le nonrespect des règles de sécurité
relatives au laser. Le système optique ne peut être réparé
qu’en usine.
ATTENTION
L'utilisation de procédures ou réglages différents de ceux
donnés ici peut entraîner une dangereuse exposition à
lumière laser visible.
Le produit utilise une diode laser. Aucun dommage aux yeux humains n’a été
constaté à la suite d’une exposition au rayon laser. Eviter de regarder fixement
le rayon, comme toute autre source lumineuse intense telle que le soleil. Eviter
aussi de diriger le rayon vers les yeux d’un observateur, même à travers des
surfaces réfléchissantes (miroirs, par exemple).
CAUTION
L’utilisation d’instruments optiques avec le scanneur
augmente le danger pour les yeux. Les instruments
optiques comprennent les jumelles, les microscopes, les
lunettes et les verres grossissants.
xiii
ESPAÑOL
Las informaciones siguientes son presentadas en conformidad con las
disposiciones de las autoridades internacionales y se refieren al uso correcto
del terminal.
NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER
Este aparato resulta conforme a las normativas vigentes de seguridad láser a la
fecha de producción: CDRH 21 CFR 1040 Sección y EN 60825-1:2001.
No es necesario abrir el aparato para la instalación, la utilización o la
manutención.
CAUTION
No intente abrir o de ninguna manera dar servicio a ninguno
de los componentes del receptáculo óptico. Abrir o dar
servicio a las piezas del receptáculo óptico por parte del
personal no autorizado podría ser una violación a los
reglamentos de seguridad. El sistema óptico se puede
reparar en la fábrica solamente.
ATENCIÓN
La utilización de procedimientos o regulaciones diferentes
de aquellas describidas en la documentación puede causar
una exposición peligrosa a la luz láser visible.
El aparato utiliza un diodo láser a baja potencia. No son notorios daños a los
ojos humanos a consecuencia de una exposición de corta duración. Eviten de
mirar fijo el rayo láser así como evitarían cualquiera otra fuente de luminosidad
intensa, por ejemplo el sol. Además, eviten de dirigir el rayo láser hacia los ojos
de un observador, también a través de superficies reflectantes como los
espejos.
CAUTION
El uso de sistemas ópticos con el escáner aumentará el
riesgo de daños oculares. Los instrumentos ópticos incluyen
binoculares, microscopios, lentes y lupas.
LED CLASS
According to EN 60825-1:2001, the Datalogic Joya™ models which use the
good read spot LED are also CLASS 1 LED PRODUCTS.
APPARECCHIO LED CLASSE 1 PRODUIT LED DE CLASSE 1
PRODUKT LED KLASSE 1 PRODUCTO LED DE CLASE 1
xiv
RADIO COMPLIANCE
In radio systems configured with mobile computers and access points, the
frequencies to be used must be allowed by the spectrum authorities of the
specific country in which the installation takes place. Be absolutely sure that the
system frequencies are correctly set to be compliant with the spectrum
requirements of the country.
Information for the User
ENGLISH
Contact the competent authority responsible for the management of radio
frequency devices of your country to verify any possible restrictions or licenses
required.
Refer to the web site http://europa.eu.int/comm/enterprise/rtte/spectr.htm
for
further information.
ITALIANO
Prendi contatto con l'autorità competente per la gestione degli apparati a radio
frequenza del tuo paese, per verificare eventuali restrizioni o licenze. Ulteriori
informazioni sono disponibili sul sito:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm
.
FRANÇAIS
Contactez l'autorité compétente en la gestion des appareils à radio fréquence
de votre pays pour vérifier d'éventuelles restrictions ou licences. Pour tout
renseignement vous pouvez vous adresser au site web:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm
.
DEUTSCH
Wenden Sie sich an die für Radiofrequenzgeräte zuständige Behörde Ihres
Landes, um zu prüfen ob es Einschränkungen gibt, oder eine Lizenz
erforderlich ist. Weitere Informationen finden Sie auf der Web Seite:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm
.
ESPAÑOL
Contacta la autoridad competente para la gestión de los dispositivos de radio
frecuencia de tu país, para verificar cualesquiera restricciones o licencias
posibles requerida. Además se puede encontrar mas información en el sitio
Web:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm
.
xv
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written
approval of Datalogic could void the authority to use the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
− Reorient or relocate the receiving antenna.
− Increase the separation between the equipment and receiver.
− Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
− Consult the dealer or an experienced radio/TV technician for help.
FCC ID: U4G0056
SAR COMPLIANCE
This product has been tested and found to comply with the following standards:
- OET BULLETIN 65 SUPPLEMENT C:2001: evaluating compliance with
FCC guidelines for human exposure to radio frequency electromagnetic
fields.
- EN 50392:2004: generic standard to demonstrate the compliance of
electronic and electrical apparatus with the basic restrictions related to
human exposure to electromagnetic fields (0 Hz- 300 GHZ).
xvi
WIRELESS AND RADIO FREQUENCIES WARNINGS
WARNING
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications or attachments could
damage the product and may violate laws and regulations.
WARNING
Most modern electronic equipment is shielded from RF signals.
However, certain electronic equipment may not be shielded
against the RF signals generated by Datalogic Joya™.
WARNING
Datalogic recommends persons with pacemakers or other
medical devices to follow the same recommendations provided
by Health Industry Manufacturers Associations for mobile
phones.
Persons with pacemakers:
• Should ALWAYS keep this device more than twenty five
(25) cm from their pacemaker and/or any other medical
device;
• Should not carry this device in a breast pocket;
• Should keep the device at the opposite side of the
pacemaker and/or any other medical device;
• Should turn this device OFF or move it immediately AWAY
if there is any reason to suspect that interference is taking
place.
• Should ALWAYS read pacemaker or any other medical
device guides or should consult the manufacturer of the
medical device to determine if it is adequately shielded
from external RF energy.
In case of doubt concerning the use of wireless devices with an
implanted medical device, contact your doctor.
WARNING
Turn this device OFF in health care facilities when any
regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may use equipment that could
be sensitive to external RF energy.
WARNING
Do not use the device while driving: give full attention to driving
— driving safely is your first responsibility.
The device is not designed to be used with a GPS system. Any
program installed without Datalogic authorization may affect the
device's safety.
xvii
WARNING
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
WARNING
An air bag inflates with great force. DO NOT place objects,
including either installed or portable wireless equipment, in the
area over the air bag or in the air bag deployment area. If
vehicle’s wireless equipment is improperly installed and the air
bag inflates, serious injury could result.
WARNING
Turn off the device when in any area with a potentially explosive
atmosphere. Observe restrictions and follow closely any laws,
regulations, warnings and best practices on the use of radio
equipment near fuel storage areas or distribution fuel areas,
chemical plants or where some operation involves use of
explosive materials.
Do not store or carry flammable liquids, explosive gases or
materials with the device or its parts or accessories.
Areas with a potentially explosive atmosphere are often, but not
always, clearly marked or showed.
Sparks in such areas could cause an explosion or fire, resulting
in injury or even death.
xviii
PATENTS
This product is covered by one or more of the following patents.
Design Pat.: EP 891,544.
U.S. Pat. 5,992,740; 6,808,114 B1; 6,997,385 B2; 7,387,246 B2
European Pat. 789,315 B1; 1,128,315 B1; 1,396,811 B1
Additional patents pending.
WEEE COMPLIANCE
Informazione degli utenti ai sensi della Direttiva Europea 2002/96/EC
L’apparecchiatura che riporta il simbolo del bidone barrato deve essere
smaltita, alla fine della sua vita utile, separatamente dai rifiuti urbani.
Smaltire l’apparecchiatura in conformità alla presente Direttiva consente di:
evitare possibili conseguenze negative per l’ambiente e per la salute
umana che potrebbero invece essere causati dall’errato smaltimento
dello stesso;
recuperare materiali di cui è composto al fine di ottenere un
importante risparmio di energia e di risorse.
Per maggiori dettagli sulle modalità di smaltimento, contattare il Fornitore dal
quale è stata acquistata l’apparecchiatura o consultare la sezione dedicata sul
sito www.mobile.datalogic.com.
Information for the user in accordance with the European Commission
Directive 2002/96/EC
At the end of its useful life, the product marked with the crossed out wheeled
wastebin must be disposed of separately from urban waste.
Disposing of the product according to this Directive:
avoids potentially negative consequences to the environment and
human health which otherwise could be caused by incorrect disposal
enables the recovery of materials to obtain a significant savings of
energy and resources.
For more detailed information about disposal, contact the supplier that provided
you with the product in question or consult the dedicated section at the website
www.mobile.datalogic.com.
xix
Information aux utilisateurs concernant la Directive Européenne
2002/96/EC
Au terme de sa vie utile, le produit qui porte le symbole d'un caisson à ordures
barré ne doit pas être éliminé avec les déchets urbains.
Éliminer ce produit selon cette Directive permet de:
éviter les retombées négatives pour l'environnement et la santé
dérivant d'une élimination incorrecte
récupérer les matériaux dans le but d'une économie importante en
termes d'énergie et de ressources
Pour obtenir des informations complémentaires concernant l'élimination,
veuillez contacter le fournisseur auprès duquel vous avez acheté le produit ou
consulter la section consacrée au site Web www.mobile.datalogic.com.
Información para el usuario de accuerdo con la Directiva Europea
2002/96/CE
Al final de su vida útil, el producto marcado con un simbolo de contenedor de
bassura móvil tachado no debe eliminarse junto a los desechos urbanos.
Eliminar este producto de accuerdo con la Directiva permite de:
evitar posibles consecuencias negativas para el medio ambiente y la
salud derivadas de una eliminación inadecuada
recuperar los materiales obteniendo así un ahorro importante de
energía y recursos
Para obtener una información más detallada sobre la eliminación, por favor,
póngase en contacto con el proveedor donde lo compró o consultar la sección
dedicada en el Web site www.mobile.datalogic.com.
Benutzerinformation bezüglich Richtlinie 2002/96/EC der europäischen
Kommission
Am Ende des Gerätelebenszyklus darf das Produkt nicht über den städtischen
Hausmüll entsorgt werden. Eine entsprechende Mülltrennung ist erforderlich.
Beseitigung des Produkts entsprechend der Richtlinie:
verhindert negative Auswirkungen für die Umwelt und die Gesundheit
der Menschen
ermöglicht die Wiederverwendung der Materialien und spart somit
Energie und Resourcen
Weitere Informationen zu dieser Richtlinie erhalten sie von ihrem Lieferanten
über den sie das Produkt erworben haben, oder besuchen sie unsere Hompage
unter www.mobile.datalogic.com.
xx
GENERAL VIEW
A) Display* D) Bumper G) Loudspeaker
B) 6 keys keyboard E) Cold reset Hole H) Micro USB
C) TTL Serial connector F) Neck Strip Anchor I) Laser window
*Remove protective film cover before use
xxi
INTRODUCTION
1
1
1 INTRODUCTION
1.1 DATALOGIC JOYA™ DESCRIPTION
The Datalogic Joya™ is a pocket-sized Windows powered mobile computer.
This extremely compact, lightweight, and versatile device, combines fully
integrated automatic data capture (1D bar code) and wireless communication
capabilities, supporting nearly any application.
The Datalogic Joya™ system architecture is based on the blend of Intel X-Scale
series processors coupled with the Windows CE operating system and it was
developed to meet the most demanding customer needs.
A huge quantity of on-board memory is available. it enables the user to adapt
the terminal for any specific need.
Thanks to its great ergonomics and the state of the art architecture, the
Datalogic Joya™ is the right answer to enhance your business opportunities.
1.2 MODEL DESCRIPTION
The brand new Datalogic Joya™ is available in two different models depending
on the options it is equipped with. All options are listed below:
• 911301003: JOYA R2U (base model)
• 911301004: JOYA+ R2U (enhanced model)
For further details about the Datalogic Joya™ models refer to the web site:
http://www.joya.datalogic.com.
DATALOGIC JOYA™
2
1 1
1.3 PACKAGE CONTENTS
The Datalogic Joya™ package contains:
− 1 Datalogic Joya™ mobile computer
Remove all the components from their packaging; check their integrity and
congruity with the packing documents.
CAUTION
Keep the original packaging for use when sending products
to the technical assistance center. Damage caused by
improper packaging is not covered under the warranty.
NOTE
Rechargeable battery packs are not initially charged.
Therefore the initial operation to perform is to charge them.
1.4 ACCESSORIES
Cradle
912201000 Datalogic Joya™ Cradle Dispenser
Batteries
91ACC1055 Datalogic Joya™ Battery Pack (10 pcs.)
Cradle Accessories
91ACC1000 Power Supply 12V 300W
91ACC0730 Power Junction Cable I90x/3 Cradle (8 pcs.)
91ACC0650 Term. Unlock Magnets (5 pcs.)
Various
94ACC1328 Datalogic Joya™ Stylus Pens (10 pcs)
91ACC1056 Datalogic Joya™ trolley holder (60 pcs.)
91ACC1057 Datalogic Joya™ checkout holder
NOTE
Use only a Datalogic Mobile-approved power supply and cables.
Use of an alternative power supply will invalidate any approval
given to this device and may be dangerous.
CONNECTIONS
3
2
2 CONNECTIONS
2.1 USB CONNECTION
You can use any standard micro USB cable to directly connect the Datalogic
Joya™ to a host computer to transfer data through the USB interface.
Key:
A) Host Computer C) Datalogic Joya™
B) Standard Micro USB cable type USB A – micro USB B
DATALOGIC JOYA™
4
1 2
2.2 WLAN CONNECTION
Datalogic Joya™ Wi-Fi 802.11 b/g radio models can communicate with the host
using the on-board radio frequency component and an Access Point connected
to the host computer.
To launch this utility you can tap the specific icon if it's visible on the taskbar or
you can open Connections folder or Control Panel from desktop and select the
'Summit Client Utility' icon.
A
Key:
A) Datalogic Joya™
B) Access Point
C) Host – Application Server
CONNECTIONS
5
2
NOTE
Wi-Fi module is on by default, in order to avoid wasting
energy, you can switch it off using the Wireless
Communications applet.
NOTE
Suspending the terminal powers off the 802.11b/g radio and
drops the radio connection. When the terminal resumes,
depending on the radio power mode and security protocol
selected, it may take up to 30 seconds for the 802.11b/g radio
driver to re-associate the radio to the network.
NOTE
Area coverage and radio performance may vary, due to
environmental conditions, access points types or interference
caused by other devices (microwave ovens, radio
transmitters, etc.)
Loading...