DATALOGIC J User Guide
Datalogic J Series™
User’s Manual
Datalogic Mobile S.r.l.
Via S. Vitalino 13
40012 - Lippo di Calderara di Reno
Bologna - Italy
Datalogic J Series™ - User's Manual
Software Version: 3.10
Ed.: 12/2009
© 2004-2009 Datalogic Mobile S.r.l. • ALL RIGHTS RESERVED • Protected to the fullest extent under U.S.
and international laws. • Copying, or altering of this document is prohibited without express written consent
from Datalogic Mobile S.r.l.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including
the U.S.A. and the E.U.
DATALOGIC J Series is a registered trademark of Datalogic Mobile S.r.l. in E.U.
All other brand and product names mentioned herein are for identification purposes only and may be
trademarks or registered trademarks of their respective owners.
Datalogic reserves the right to make modifications and improvements without prior notification.
Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or
consequential damages resulting from the use of this material.
CONTENTS
REFERENCES ............................................................................................. v
Conventions.................................................................................................. v
Reference Documentation ............................................................................ v
Services and Support.................................................................................... v
SAFETY REGULATIONS............................................................................ vi
General Safety Rules....................................................................................vi
Bluetooth® Approval......................................................................................vi
Power Supply................................................................................................vi
Laser Safety.................................................................................................vii
Radio Compliance......................................................................................... x
SAR Compliance..........................................................................................xii
Patents.........................................................................................................xii
WEEE Compliance .....................................................................................xiii
GENERAL VIEW........................................................................................ xv
1 INTRODUCTION ..........................................................................................1
1.1 Datalogic J Series™ PDA Description..........................................................1
1.2 Available Models...........................................................................................2
1.3 Package Contents.........................................................................................2
1.4 Inserting Mini SD Card..................................................................................4
1.5 Installing the SIM Card..................................................................................6
1.5.1 Removing the SIM Card................................................................................ 8
1.6 Accessories...................................................................................................9
1.7 Operating System.......................................................................................10
2 CONNECTIONS .........................................................................................11
2.1 RS232/USB Direct Connection...................................................................11
2.2 WLAN Connection ......................................................................................12
2.3 WPAN Connection......................................................................................14
2.4 WWAN Connection.....................................................................................16
2.5 GPS Connection.........................................................................................18
2.6 Cradle Connections ....................................................................................22
2.7 Connection Cables......................................................................................23
3 USE AND FUNCTIONING..........................................................................24
3.1 PDA Startup................................................................................................24
3.2 Windows Mobile Welcome Wizard ..............................................................26
3.3 Using the Stylus..........................................................................................27
3.4 Data Capture...............................................................................................28
3.4.1 Laser Data Capture..................................................................................... 28
3.4.2 Imager Data Capture .................................................................................. 29
3.4.3 RFID Data Capture..................................................................................... 30
iii
3.5 Description of the Keys...............................................................................31
3.5.1 System Control and Navigation Keys.......................................................... 31
3.5.2 Key Selection..............................................................................................32
3.5.3 Resetting the J Series.................................................................................34
3.6 Status Indicators.........................................................................................37
3.6.1 LED Status.................................................................................................. 37
3.6.2 Taskbar.......................................................................................................38
3.7 Data Capture Configuration ........................................................................40
3.7.1 Configure ....................................................................................................40
3.7.2 Capture....................................................................................................... 46
3.8 Control Panel..............................................................................................47
3.8.1 Buttons........................................................................................................ 48
3.8.2 Registry....................................................................................................... 50
3.8.3 Files Admin................................................................................................. 51
3.8.4 Wireless Communications...........................................................................53
3.8.5 GPS Settings ..............................................................................................55
3.8.6 Ethernet Settings ........................................................................................61
3.8.7 Stylus Calibration........................................................................................64
3.8.8 Volume Settings.......................................................................................... 67
3.9 Windows Connections ................................................................................71
3.9.1 Microsoft® ActiveSync® .............................................................................71
3.9.2 Bluetooth® Manager Device Setup............................................................. 73
3.9.3 FTP Server Setup....................................................................................... 81
3.10 Backup Directory File Management............................................................82
3.11 Firmware Update For Windows CE.............................................................83
4 MAINTENANCE .........................................................................................84
4.1 Charging the Battery Pack..........................................................................84
4.2 Replacing the Battery Pack.........................................................................85
4.3 Cleaning the PDA .......................................................................................88
5 TECHNICAL FEATURES...........................................................................89
5.1 Technical Data............................................................................................89
5.2 Reading Diagrams......................................................................................93
6 TEST CODES.............................................................................................94
GLOSSARY................................................................................................ 97
INDEX.......................................................................................................100
iv
REFERENCES
CONVENTIONS
This manual uses the following conventions:
“User” refers to anyone using a Datalogic J Series™ PDA.
“Mobile computer”, “PDA” and " Datalogic J Series™" refer to Datalogic J Series™
PDA.
“You” refers to the System Administrator or Technical Support person using this
manual to install, configure, operate, maintain or troubl eshoot a Datalogic J Series™
PDA.
REFERENCE DOCUMENTATION
For further information regarding Datalogic J Series™ refer to the SDK Help on-Line.
SERVICES AND SUPPORT
Datalogic provides several services as well as technical support through its website.
Log on to www.mobile.datalogic.com and click on the links
information including:
indicated for further
- PRODUCTS
Search through the links to arrive at your product page where you can download
specific Manuals
and Software & Utilities
- SERVICES & SUPPORT
- Datalogic Services Warranty Extensions and Maintenance Agreements
- Authorised Repair Centres
- CONTACT US
E-mail form and listing of Datalogic Subsidiaries
v
SAFETY REGULATIONS
Read this manual carefully before performing any type of connection
to the Datalogic J Series™ PDA.
The user is responsible for any damages caused by incorrect use of
NOTE
GENERAL SAFETY RULES
− Use only the components supplied by the manufacturer for the specific Datal ogic
J Series™ PDA being used.
− Do not attempt to disassemble the Datalogic J Series™ PDA, as it does not
contain parts that can be repaired by the user. An y tampering will invalidate the
warranty.
− When replacing the battery pack or at the end of the operative life of the
Datalogic J Series™ PDA, disposal must be performed in compliance with the
laws in force. See also par. 4.2.
− Do not submerge the Datalogic J Series™ PDA in liquid products.
BLUETOOTH® APPROVAL
This product is equipped with the following certified Bluetooth® module:
Product Name
Bluetooth ID
Product ID
POWER SUPPLY
This device is intended to be supplied by a UL Listed/CSA Certified Power Unit
marked "Class 2" or LPS power source rated 12-14 V DC, minimum 1 A which
supplies power directly to the PDA.
the equipment or by inobservance of the indication s upplied in this
manual.
: Datalogic CE BLUETOOTH SUBSYSTEM
: B03071
: DLBTCE-02
vi
LASER SAFETY
The laser light is visible to the human eye and is emitted from the window indicated in
the figure.
This information applies to both Laser models and the Datalogic J Series™ Imager
Aiming System.
Laser output window
I D F E
La luce laser è visibile
all'occhio umano e
viene emessa dalla
finestra indicata nella
figura.
LUCE LASER
NON FISSARE IL FASCIO
APPARECCHIO LASER DI
CLASSE 2
MASSIMA POTENZA DI
USCITA: 1,4 mW
LUNGHEZZA D'ONDA
EMESSA: 630 ~ 680 nm
CONFORME A EN 60825-1
(2001)
Die Laserstrahlung ist für
das menschliche Auge
sichtbar und wird am
Strahlaustrittsfenster
ausgesendet (siehe Bild).
LASERSTRAHLUNG
NICHT IN DER STRAHL
BLINKEN
PRODUKT DER
LASERKLASSE 2
MAXIMALE
AUSGANGSLEISTUNG: 1,4
mW
WELLENLÄNGE: 630 ~ 680
nm
ENTSPR. EN 60825-1
(2001)
Le rayon laser est visible
à l'œil nu et il est émis
par la fenêtre désignée
sur l'illustration dans la
figure.
RAYON LASER
EVITER DE REGARDER
LE RAYON
APPAREIL LASER DE
CLASSE 2
PUISSANCE DE SORTIE:
1,4 mW
LONGUER D'ONDE EMISE:
630 ~ 680 nm
CONFORME A EN 60825-1
(2001)
La luz láser es visible al
ojo humano y es emitida
por la ventana indicada
en la figura.
RAYO LÁSER
NO MIRAR FIJO EL RAYO
APARATO LÁSER DE
CLASE 2
MÁXIMA POTENCIA DE
SALIDA: 1,4 mW
LONGITUD DE ONDA
EMITIDA: 630 ~ 680 nm
CONFORME A EN 60825-1
(2001)
vii
ENGLISH
The following information is provided to comply with the rules imposed by
international authorities and refers to the correct use of your PDA.
STANDARD LASER SAFETY REGULATIONS
This product conforms to the applicable requirements of both CD RH 21 CFR 1040
and EN 60825-1 at the date of manufacture.
For installation, use and maintenance, it is not necessary to open the device.
Use of controls or adjustments or performan ce of procedures other
than those specified herein may result in exposure to hazardous
WARNING
visible laser light.
The product utilizes a low-power laser d iode. Although staring directly at the laser
beam momentarily causes no known biological d amag e, avoid stari ng at the beam as
one would with any very strong light source, such as the sun. Avoid that the laser
beam hits the eye of an observer, even through reflective surfaces such as mirrors,
etc.
ITALIANO
Le seguenti informazioni vengono fornite dietro direttive dell e autorità internazi onali e
si riferiscono all’uso corretto del PDA.
NORMATIVE STANDARD PER LA SICUREZZA LASER
Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla data
di produzione: CDRH 21 CFR 1040 e EN 60825-1.
Non si rende mai necessario aprire l’appare cchio per motiv i di i nstallazion e, utilizzo o
manutenzione.
L'utilizzo di procedure o regola zioni differenti da quelle descritte
nella documentazione può provocare un'es posizione pericolos a
ATTENZIONE
a luce laser visibile.
Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti danni
riportati dall’occhio umano in seguito ad una esposizione di breve durata, evitare di
fissare il raggio laser così come si eviterebbe qualsiasi altra sorgente di luminosità
intensa, ad esempio il sole. Evitare inoltre di dirigere il raggi o laser negli occhi di un
osservatore, anche attraverso superfici riflettenti come gli specchi.
viii
DEUTSCH
Die folgenden Informationen stimmen mit den Sicherheitshinweisen über ein, die von
internationalen Behörden auferlegt wurden, und sie beziehen sich auf den korrekten
Gebrauch vom PDA.
NORM FÜR DIE LASERSICHERHEIT
Dies Produkt entspricht am Tag der Herstellung den gültigen EN 60825- 1 und CDR H
21 CFR 1040 Normen für die Lasersicherheit.
Es ist nicht notwendig, das Gerät wegen Betrieb oder Installations-, und WartungsArbeiten zu öffnen.
Jegliche Änderungen am Gerät sowie Vorgehe nsweisen, die nicht
in dieser Betriebsanleitung beschrieben werden, können ein
ACHTUNG
gefährliches Laserlicht verursachen.
Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine Augenschäden von
kurzen Einstrahlungen bekannt sind, sollten Sie es vermeiden für län gere Zeit in den
Laserstrahl zu schauen, genauso wenig wie in starke Licht quellen (z.B. die Sonne).
Vermeiden Sie es, den Laserstrahl weder gegen die Au gen eines Beob achters, noch
gegen reflektierende Oberflächen zu richten.
FRANÇAIS
Les informations suivantes sont fournies selon les règles fixées par les autorités
internationales et se réfèrent à une correcte utilisation du PDA.
NORMES DE SECURITE LASER
Ce produit est conforme aux normes de sécurité laser en vigueur à sa date de
fabrication: CDRH 21 CFR 1040 et EN 60825-1.
Il n’est pas nécessaire d’ouvrir l’appareil pour l’installation, l’utilisation ou l’entretien.
L'utilisation de procédures ou réglages différents de ceux donnés
ici peut entraîner une dangereuse exposition à lumière laser
ATTENTION
visible.
Le produit utilise une diode laser. Aucun dommage aux yeux humains n’a été
constaté à la suite d’une exposition au rayon laser. Eviter de regarder fixement l e
rayon, comme toute autre source lumineuse intense telle que le soleil. Eviter aussi
de diriger le rayon vers les yeux d’un observateur, même à travers des surfaces
réfléchissantes (miroirs, par exemple).
ix
ESPAÑOL
Las informaciones siguientes son presentadas en conformi dad con las disposicion es
de las autoridades internacionales y se refieren al uso correcto del PDA.
NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER
Este aparato resulta conforme a las normativas vigentes de seguridad láser a la
fecha de producción: CDRH 21 CFR 1040 y EN 60825-1.
No es necesario abrir el aparato para la instalación, la utilización o la manutención.
La utilización de procedimientos o regulaciones diferentes de
aquellas describidas en la documentación puede causar una
ATENCIÓN
exposición peligrosa a la luz láser visible.
El aparato utiliza un diodo láser a baja potencia. No son notori os daños a los ojos
humanos a consecuencia de una exposición de corta duración. Eviten de mirar fijo el
rayo láser así como evitarían cualquiera otra fuente de luminosidad intensa, por
ejemplo el sol. Además, eviten de dirigir el rayo láser hacia los ojos de un
observador, también a través de superficies reflectantes como los espejos.
LED Illuminator
The use of an illuminator in the Datalogic J Series™ Imager is a Class 1 LED
product:
CLASS 1 LED PRODUCT
ILLUMINATORE LED CLASSE 1
AUSLEUCHTER LED KLASSE 1
ILLUMINATEUR A LED DE CLASSE 1
ILUMINADOR LED DE CLASE 1
RADIO COMPLIANCE
In radio systems configured with PDAs and access points, the frequencies to be used
must be allowed by the spectrum authorities of the specific country in which the
installation takes place. Be absolutely sure that the system frequencies are correctly
set to be compliant with the spectrum requirements of the country.
The Radio modules used in this product automatically adapt to the frequencies set b y
the system and do not require any parameter settings.
x
The following shows the correspondence between the Datalogic J Series™ models
and the Radio modules:
DLJS 5XX-XXX-XXX 802.11b (Wi-Fi) radio card
DLJS 7XX-XXX-XXX 802.11b/g (Wi-Fi) radio card
DLJS X1X-XXX-XXX GSM/GPRS Tri-band (900, 1800, 1900 MHz) module
DLJS 741-904-555 WIFI+GPRS+GP+BT,HP,WM module
Information for the User
ENGLISH
Contact the competent authority responsible for the manag ement of radio frequency
devices of your country to verify any possibl e restrictions or licenses required. Refer
to the web site
information.
Contatta l'autorità competente per la gestione degli apparati a radio frequenza del tuo
paese, per verificare eventuali restrizioni o licenze. Ulteriori informazioni sono
disponibili sul sito:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm.
Contactez l'autorité compétente en la gestion des appareils à radio fréquence de
votre pays pour vérifier d'éventuelles restrictions ou licences. Pour tout
renseignement vous pouvez vous adresser au site web:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm.
Wenden Sie sich an die für Radiofrequenzgeräte zuständige Behörde Ihres Landes,
um zu prüfen ob es Einschränkungen gibt, oder eine Lizenz erforderlich ist. Weitere
Informationen finden Sie auf der Web Seite:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm.
Contacta la autoridad competente para la gestión de los dispositivos de radio
frecuencia de tu país, para verificar cualesquiera restricciones o licencias posibles
requerida. Además se puede encontrar mas información en el sitio web:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm.
http://europa.eu.int/comm/enterprise/rtte/spectr.htm for further
ITALIANO
FRANÇAIS
DEUTSCH
ESPAÑOL
xi
SAR COMPLIANCE
This product has been tested and found to comply with the following standards:
- EN50360: product standard to demonstrate the compliance of mobile phones with the
basic restrictions related to human exposure to electromagnetic fields (300 MHz – 3 GHz).
- EN50361: basic standard for the measurement of specific absorption rate related to
human exposure to electromagnetic fields from mobile phones (300 MHz – 3 GHz).
- Australian Radiation Protection And Nuclear Safet y Agency (ARPANSA): radiation
protection series publication No. 3: maximum exposure levels to radio frequency
fields 3 KHz TO 300 GHz.
PATENTS
This product is covered by one or more of the following patents:
U.S. Pat. Nos: 5,992,740; 6,512,218 B1; 6,877,664 B1; 7,102,116 B2; 7,282,688 B2;
7,468,499 B2
European Pat. Nos: 681,257 B1; 789,315 B1; 999,514 B1; EP 1 172 756 B1
Additional patents pending.
xii
WEEE COMPLIANCE
Informazione degli utenti ai sensi della Direttiva Europea 2002/96/EC
L’apparecchiatura che riporta il simbolo del bidone barrato deve essere smaltita, alla fine della
sua vita utile, separatamente dai rifiuti urbani.
Smaltire l’apparecchiatura in conformità alla presente Direttiva consente di:
evitare possibili conseguenze negative per l’ambiente e per la salute umana che
potrebbero invece essere causati dall’errato smaltimento dello stesso;
recuperare materiali di cui è composto al fine di ottenere un importante risparmio di
energia e di risorse.
Per maggiori dettagli sulle modalità di smaltimento, contattare il Fornitore dal quale è stata
acquistata l’apparecchiatura o consultare la sezione dedicata sul sito
www.mobile.datalogic.com.
Information for the user in accordance with the European Commission Directive
2002/96/EC
At the end of its useful life, the product marked with the crossed out wheeled wastebin must be
disposed of separately from urban waste.
Disposing of the product according to this Directive:
avoids potentially negative consequences to the environment and human health
which otherwise could be caused by incorrect disposal
enables the recovery of materials to obtain a significant savings of energy and
resources.
For more detailed information about disposal, contact the supplier that provided you with the
product in question or consult the dedicated section at the website www.mobile.datalogic.com.
Information aux utilisateurs concernant la Directive Européenne 2002/96/EC
Au terme de sa vie utile, le produit qui porte le symbole d'un caisson à ordures barré ne doit pas
être éliminé avec les déchets urbains.
Éliminer ce produit selon cette Directive permet de:
xiii
éviter les retombées négatives pour l'environnement et la santé dérivant d'une
élimination incorrecte
récupérer les matériaux dans le but d'une économie importante en termes d'énergi e
Pour obtenir des informations complémentaires concernant l'élimination, veuillez contacter le
fournisseur auprès duquel vous avez acheté le produit ou consulter la section consacrée au site
Web www.mobile.datalogic.com.
Información para el usuario de accuerdo con la Directiva Europea 2002/96/CE
Al final de su vida útil, el producto marcado con un simbolo de contenedor de bassura móvil
tachado no debe eliminarse junto a los desechos urbanos.
Eliminar este producto de accuerdo con la Directiva permite de:
Para obtener una información más detallada sobre la eliminación, por favor, póngase en
contacto con el proveedor donde lo compró o consultar la sección dedicada en el Web site
www.mobile.datalogic.com.
Benutzerinformation bezüglich Richtlinie 2002/96/EC der europäischen Kommission
Am Ende des Gerätelebenszyklus darf das Produkt nicht über den städtischen Hausmüll
entsorgt werden. Eine entsprechende Mülltrennung ist erforderlich.
Beseitigung des Produkts entsprechend der Richtlinie:
Weitere Informationen zu dieser Richtlinie erhalten sie von ihrem Lieferanten über den sie das
Produkt erworben haben, oder besuchen sie unsere Hompage unter
www.mobile.datalogic.com.
et de ressources
evitar posibles consecuencias negativas para el medio ambiente y la salud derivadas
de una eliminación inadecuada
recuperar los materiales obteniendo así un ahorro importante de energía y recursos
verhindert negative Auswirkungen für die Umwelt und die Gesundheit der Menschen
ermöglicht die Wiederverwendung der Materialien und spart somit Energie und
Resourcen
xiv
GENERAL VIEW
J
A
B
I
C
D
E
H
G
F
Figure A – General View
A) Data capture/Laser output window
B) Scan key(s) (3)
C) Bluetooth® LED
D) Charging status LED
E) Backlit keyboard
F) External power supply connector
G) Communication/Charger connector
H) Headset jack
P
O
N
M
I) User programmable LED
J) Backlit display
K) Mini SD card SLOT
L) Microphone
M) Latch release button
N) Battery latch
O) Battery pack
P) Speaker
K
L
xv
xvi
INTRODUCTION
1
1 INTRODUCTION
1.1 DATALOGIC J SERIES™ PDA DESCRIPTION
The Datalogic J Series™, is the powerful Datalogic PDA.
Thanks to the state-of the-art architecture and the most advanced technologies, it
can provide the most suitable levels for capturing, computing and communicating
data faster and easier.
In addition to the highest robustness and reliability in its class, ot her key features of
the Datalogic J Series™ include fully int egrated automatic data capture (barcodes,
RFID tags and images) and superior wireless communication capabilities (WLAN,
WWAN and WPAN). The PDA is equipped with a function-based keyboard for direc t
ERP transactions and with a web-based layout for HTML needs as well. These key
requirements make the Datalogic J Series perfect for use in field force automation,
in-store and logistics applications.
The Datalogic J Series is also equipped with the integrated Global Positioning
System (GPS) technology. Combined with its advanced wireless and data collection
technologies, the result is a single comprehensive mobile solution that eliminates the
need for deploying multiple devices to the field.
The Datalogic J Series™ enables companies and org anizations worldwide to make
more effective use of people and tools for receiving, storage, and shipping activities.
For example, extended mobility allows simult aneous rea l-ti me inventor y manageme nt
and control of all stock movements to increase precisio n while minimizing operating
costs. Data on store shelves, inventory levels and storage bins are immediately
available to permit greater coordination and cut flow times.
The Datalogic J Series™ provides mobile professionals with the most relevant
features needed to operate in demanding environments: reliabi lity, ruggedness, drop
resistance, long lasting batteries, flexible communication and efficient d ata capture.
To optimize mobile applications, a user-accessible memory slot is also present to
backup data, extend databases, etc.
Thanks to a set of accessories, such as a vehicle cradle (standard and loud
speaker), cigarette lighter power adapter, dashboard mounting kit, with state-of-theart technology inside the PDA, the Datalogic J Series is the right answer for all dat a
management needs on the move.
1
1
DATALOGIC J SERIES™
1.2 AVAILABLE MODELS
The Datalogic J Series™ PDA is available in different models depending on the
options it is equipped with. All options are listed below:
• communication options: Wi-Fi 802.11b, Wi-Fi 802.11b/g, GSM/GPRS, Bluetooth®;
GPS
• capture options: laser, imager, laser + RFID
• compute options (fixed): O.S. version, microprocessor type/speed, memory size
For further details about the Datalogic J Series™ PDA models r efer to the web site:
www.mobile.datalogic.com.
1.3 PACKAGE CONTENTS
The Datalogic J Series™ PDA package contains:
− 1 Datalogic J Series™ PDA
− 1 CD-ROM Datalogic SDK
− 1 CD-ROM Getting Started Disk only for Windows Mobile
− 2 styluses
− 3 adhesive pull tabs for Mini SD card
− 1 user’s manual
− 1 rechargeable battery pack
− 1 adjustable elastic strap with stylus holder
− 1 belt clip
− 1 belt clip pivot
Any other packages will contain the accessories necessary for the Datalogic J
Series™ PDA connection to the host computer and to the network: the cradle, po wer
supply, and one or more connection cables. Remove all the components from their
packaging; check their integrity and congruity with the packing documents.
CAUTION
2
Keep the original packaging for use when sending products to the
technical assistance center. Damage caused by improper
packaging is not covered under the warranty.
INTRODUCTION
NOTE
1
Rechargeable battery packs are not initially charged. Therefore the
first operation to perform is to charge them. See paragraph 4.1.
3
1
DATALOGIC J SERIES™
1.4 INSERTING MINI SD CARD
With Datalogic J Series™ PDA, it is possible to add a Mini SD Card for additional
storage capacity. To access the Mini SD card slot, unscrew the cover at the side of
Datalogic J Series (see Figure A) and then proceed as follows:
1. Before inserting the Mini SD card, peel the adhesive p ull tab and stick it onto to
the Mini SD card as shown in the picture below:
2. Open the Mini SD card slot by unscrewing the two screws:
3. Insert the card with the written part upward and push it until it clicks into place:
To remove the Mini SD card slightly push it toward the inside until it clicks; the card is
released, pull it out using the adhesive pull tab.
4
INTRODUCTION
Follow proper ESD precautions to avoid damaging the SD. Proper ESD
precautions include, but are not limited to, working on an ESD mat and
CAUTION
ensuring that the operator is properly grounded.
Do not force the card. If you feel resistance, remove the card, check
the orientation, and reinsert it.
Do not use the SD card slot for any other accessories.
1
5
1
DATALOGIC J SERIES™
1.5 INSTALLING THE SIM CARD
To correctly insert the SIM Card, proceed as follows:
1- Turn off the Datalogic J Series™ PDA.
2- Press the latch release button and pull the battery latch down as indicated in the
figures below:
3- Remove the battery pack to have access to the SIM card slot:
SIM Card Slot
Locking Plate
6
INTRODUCTION
4- Open the Sim Card slot by pulling up the locking plate.
1
5- Pull up the cardholder an d insert the Sim Card with its contacts downward and
its round corner at the bottom.
6- Lock the card into place by pushing the cardholder down and th en pulling the
locking plate down.
Follow proper ESD precautions to avoid damaging the SIM card.
Proper ESD precautions include, but are not limited to, working on an
CAUTION
ESD mat and ensuring that the operator is properly grounded.
Do not force the card. If you feel resistance, remove the card, check
the orientation, and reinsert it.
Do not use the SIM card slot for any other accessories.
7
1
DATALOGIC J SERIES™
1.5.1 Removing the SIM Card
To remove the SIM card, follow the steps above to access the SIM area, and r emove
it from its slot.
All the basic functionalities normally associated to the SIM card ar e
managed by the terminal (GPRS connectivity, phone calls, SMS
handling).
NOTE
It is possible that not all the services connected to the SIM card can
be used or can be managed by the terminal.
8
INTRODUCTION
1.6 ACCESSORIES
Cradles
94A151096 DLJS Single Cradle Desk (includes slot for spare battery pack recharge;
RS232 and USB communications)
94A151097 DLJS Single Cradle Vehicle Loudspeaker
94A151100 DLJS Single Cradle Vehicle Standard
94A151109 DLJS Ethernet Desk Multi Cradle
Charger
94A151098 DLJS Multi Battery Charger (4 slots)
Batteries
94ACC1293 DLJS Standard Battery (Li-Ion battery pack 1070 mAh@7.4 V)
94ACC1294 DLJS Large Capacity Battery (Li-Ion battery pack 1800 mAh@7.4 V)
Power Supply
94ACC1286 PG12-10P35 AC/DC Power Supply without cord for Datalogic J Series™
94ACC1296 PG12-10P35 AC/DC Power supply EU KIT
94ACC1297 PG12-10P35 AC/DC Power supply UK KIT
94ACC1298 PG12-10P35 AC/DC Power supply US KIT
94ACC1299 PG12-10P35 AC/DC Power supply AUS KIT
94ACC4595 FPS18 Power Supply without cord for DLJS Single Cradle Desk and for DLJS
Multi Battery Charger
94ACC1150 Power cord EU 3-pin
Cables
94A051008 WIN-NET SERIAL CABLE (HRS 3500-16P-CV) cable for RS232 direct
connection between the PDA and the PC
94A051009 WIN-NET USB CABLE (HRS 3500-16P-CV) cable for USB direct connection
between the PDA and the PC
94A051012 WIN-NET VEHICLE PWR CAB (HRS 3500-16P-CV) cable for powering J
Series™ from the car cigarette lighter
Various
94ACC1331 vo-CE® Headset
94ACC1333 vo-CE® Headset Adapter For Datalogic J Series™
94ACC1287 DLJS Belt Holster
94ACC1288 DLJS Functional Case
94ACC1307 DLJS Functional Case Plus
94ACC1344 DLJS Backstrap Kit
94ACC1308 Safe Shoulderstrap (5 pcs)
94ACC1301 Stylus Pen (20 pcs)
1
9
1
DATALOGIC J SERIES™
Use only a Datalogic Mobile-approved power supp ly and ca bles. Use
of an alternative power supply will invalidate any appr oval given to
NOTE
this device and may be dangerous.
1.7 OPERATING SYSTEM
Datalogic J Series™ comes in two different models, respectively supportin g Wind o ws
CE and Windows Mobile.
For further information regarding Windows Mobile refer to the website:
http://www.microsoft.com/windowsmobile.
10
CONNECTIONS
2
2 CONNECTIONS
2.1 RS232/USB DIRECT CONNECTION
You can use a cable to connect the Datalogic J Series™ PDA to a host computer to
transfer data.
Key:
A Host computer C RS232 cable or USB cable
B Datalogic J Series™
D *Power Supply
(only necessary for battery charging)
PDA
* Recommended Power Supply: PG12-10P35 AC/DC Power Supply
If the PDA supports Windows Mobile, before plugging the RS232
cable you have to check the 'COM1 Enable' option on t he 'System
Configuration' window. (Start -> Programs -> System
CAUTION
Configuration).
USB communication may not be completely guaranteed while
CAUTION
batteries are simultaneously in charge. Avoid the power supply
connection when the USB link is active.
11
2
DATALOGIC J SERIES™
2.2 WLAN CONNECTION
Datalogic J Series™ Wi-Fi 802.11b and Wi-Fi 802.11b/g
with the host using the on-board radio frequency module and an Access Point
connected to the host computer.
For models using the WiFi7 radio (7xx-xxx-xxx models), you can find information
about the applet for radio configuration:
http://www.summitdatacom.com/SCU.htm.
To launch this utility you can tap the specific icon if it’s visible on the taskbar or:
1. On Windows CE device, you can open Co nnections folder or Control P anel from
desktop and select the ‘Summit Client Utility’ icon.
2. On Windows Mobile device, you can select the menu item: Start->Programs>Summit and tap the ‘Summit Client Utility’ icon.
A
B
1
models can communicate
C
Key:
A) Datalogic J Series™ PDA
B) Access point
C) Host – Application Server
1
Note: unless otherwise specified, the Wi-Fi term is used both for the 802.11b and the 802.11b/g cards.
12
CONNECTIONS
Wi-Fi module is on by default. In order to avoid wastin g energy, you can
switch it off using the Wireless Communications applet (see par. 3.8.4).
To start configuring your WLAN connection, tap the Wi-Fi icon at the
NOTE
bottom of the screen.
Suspending the terminal powers off the 802.11b/g radio and drops
the radio connection. When the terminal resumes, dep ending on the
radio power mode and security protocol selected, it takes
NOTE
approximately from 10 to 30 seconds for the 802.11b/g radio driver t o
re-associate the radio to the network.
Area coverage and radio performance may vary, due to
environmental conditions, access points types or interference cause d
NOTE
by other devices (microwave ovens, radio transmitters, etc.)
2
13
2
DATALOGIC J SERIES™
2.3 WPAN CONNECTION
Datalogic J Series™ PDAs can communicate with a Bluetooth
printer, within a range of 10 m, using the on-board Bluetooth
®
module.
®
device, such as a
A
B
Key:
A) Datalogic J Series™ PDA
B) Bluetooth® printer
In order to avoid wasting energy, the Bluetooth® module is off by
default. If you need to have Bluetooth® working, the module must be
powered on using the Wireless Communications applet (see par.
NOTE
3.8.4), and perform the Discovery procedure (see par. 3.9.2).
The Blue LED flashing signals that the Bluetooth® module is on.
Suspending the terminal powers off the Bluetooth® radio and drops
the piconet (Bluetooth® connection). When the terminal resumes, it
takes approximately 10 seconds for the Bluetooth® radio driver to re-
NOTE
initialize the radio.
14
Loading...