Datalogic HRS 3500-16P-CV User Manual

WIN-NET VEHICLE PWR CAB (HRS 3500-16P-CV)

WIN-NET VEHICLE PWR CAB (HRS 3500-16P-CV) is an accessory regulated

The

power supply cable used to charge the battery of your Datalogic Mobile Computer from your vehicle.

to Vehicle Cigarette Lighter

to Datalogic Mobile Computer

REPLACING THE FUSE

To replace the fuse:

1. Disconnect the cable from the terminal.

2. Open the cigarette lighter connector by removing the screw and pulling off the sleeve.

3. Replace the fuse with a new one of the same type.

4. Close the connector, replace the sleeve and tighten the screw.

8A Slow-blow Fuse

Sleeve

TECHNICAL FEATURES

Electrical Features

Power supply 10 to 32 Vdc Consumption (when charging) 1.8 A max. Quiescent Consumption

5 mA max.

(not charging)

Environmental Features

Working temperature* 0° to + 50 °C / +32° to +122 °F Storage temperature -20° to +70 °C / -4° to +158 °F Humidity 90% non condensing Protection IP40 Mechanical Features Cable Length 2 m / 6 ft. 6 in. Weight about 160 g. / 5.6 oz

* Battery must be charged at a temperature ranging from 0° to +45 °C (+32° to +113 °F).

WEEE COMPLIANCE

822000660 (Rev. B)