Datalogic Gryphon L GD4300 Quick Reference Manual

Gryphon™ L GD4300

General Purpose Corded

Handheld Laser Bar Code Reader

Quick Reference Guide

Datalogic Scanning, Inc.

959 Terry Street
Eugene, Oregon 97402
USA
Telephone: [phone]
Fax: [phone]

An Unpublished Work - All rights reserved. No part of the contents of this documenta­tion or the procedures described therein may be reproduced or transmitted in any
form or by any means without prior written permission of Datalogic Scanning, Inc. or
its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”). Owners of Datalogic
products are hereby granted a non-exclusive, revocable license to reproduce and
transmit this documentation for the purchaser's own internal business purposes. Pur­chaser shall not remove or alter any proprietary notices, including copyright notices,
contained in this documentation and shall ensure that all notices appear on any
reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions
by contacting your Datalogic representative. Electronic versions may either be down­loadable from the Datalogic website (www.scanning.datalogic.com) or provided on
appropriate media. If you visit our website and would like to make comments or sug­gestions about this or other Datalogic publications, please let us know via the "Con­tact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is
complete and accurate, however, Datalogic reserves the right to change any specifica­tion at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in
many countries, including the U.S.A. and the E.U. All other brand and product names
may be trademarks of their respective owners.

Patents

This product is covered by one or more of the following patents.

Design Patents: EP 870,787

US Patents: 5,144,118; 5,311,000; 5,481,098; 5,493,108; 5,929,421;5,992,740; 6,517,003
B2; 6,808,114 B1; 6,997,385 B2; 7,387,246 B2.

European Patents: 789,315 B1; 1,128,314 B1; 1,128,315 B1; 1,396,811 B1; 1,413,971 B1.

Additional Patents pending.

Table of Contents

Gryphon L GD4300 Quick Reference Guide .................................1

End User License Agreement ............................................................1

Software Product Policy...................................................................... 5

Customers Under Software Support ...................................5

Technical Features ................................................................................ 6

Connect/Disconnect Cable................................................................ 8

Connect Host Interface........................................................................ 8

Keyboard Wedge Interface .....................................................8

RS-232 Interface ..........................................................................8

USB Interface ................................................................................9

Aim and Scan .......................................................................................... 9

Parts of the Reader............................................................................. 10

Scanning Modes ................................................................................. 10

Troubleshooting................................................................................. 13

LED and Beeper Indications............................................................ 14

Programming Barcodes................................................................... 15

Resetting the Standard Product Defaults ....................... 15

RS-232 Interface ............................................................ 16

IBM Interface .................................................................. 16

USB Interface .................................................................. 17

Keyboard Wedge Interface ....................................... 18

Ergonomic Recommendations...................................................... 20

Regulatory Information.................................................................... 20

Power Supply ............................................................................ 20

Laser Safety Compliance ....................................................... 21

Radio Frequency Interference Requirements ............... 23

Reader Labeling .................................................................................. 24

NOTES

Quick Reference Guide 1

Gryphon L GD4300

Quick Reference Guide

Datalogic Scanning, Inc.

GRYPHON™ PRODUCT SERIES END USER LICENSE AGREEMENT

Notice to End User: The Datalogic Product you have acquired contains embedded
Software, which is integral to the product's operation. This Software is being pro­vided to you under license, subject to the terms and conditions of this Agreement. If
you use the Datalogic Product, you will be deemed to have accepted the terms and
conditions of this Agreement. If you do not intend to be bound to the terms of this
Agreement, Datalogic is not willing to license the Software to you, you may not use
the Datalogic Product or the Software, and you must contact the party from whom
you acquired the Datalogic Product for instructions.

This End User Software License Agreement ("Agreement") is a legally binding agree­ment governing the licensing of the Software and Documentation by Datalogic
Scanning, Inc. and its Affiliates ("Datalogic") to the entity or person who has pur­chased or otherwise acquired a Datalogic Product ("End User"). For purposes of this
Agreement, any software that is associated with a separate end-user license agree­ment is licensed to you under the terms of that license agreement. Datalogic and
End User hereby agree as follows:

1. Definitions.

1.1 "Affiliate" means a business entity currently existing or later acquired that
controls, is controlled by, or is under common control with Datalogic S.p.A.

1.2 "Documentation" means materials such as user's guides, program reference
guides, quick reference guides, manuals, or similar materials associated with
or related to the Datalogic Product, whether in printed, "online", or other
form.

1.3 "Proprietary Information" means: (a) source code, object code, software,
documentation, and any related internal design, system design, data base
design, algorithms, technology, technical data or information, implementa­tion techniques, and trade secrets related to the Software, (b) any other
trade secrets marked appropriately or identified as proprietary or confiden­tial, and (c) any information that End User, under the circumstances, should
recognize as confidential. Proprietary Information does not include any
information that the receiving party can establish was (1) in the public
domain, (2) already in the receiving party's possession or rightfully known
prior to receipt, (3) rightfully learned from a third party not in violation of
any other's proprietary rights, or (4) independently developed without
access to Proprietary Information.

1.4 "Datalogic Product" means the Datalogic® Gryphon™ series scanner prod­uct, including all embedded Software in and all Documentation related to
such product, which has been purchased or otherwise acquired by End
User, whether obtained directly or indirectly from Datalogic.

1.5 "Software" means any software or computer programs of Datalogic or its
third party licensors in machine readable form which is embedded in the
Datalogic Product, whether obtained directly or indirectly from Datalogic,
including any replacement, update, upgrade, enhancement or modifica­tion.

2. Scope Of License Granted.

2.1 Datalogic grants to End User a non-exclusive, non-transferable, perpetual
license to use the Software, solely on the Datalogic Product in which it is
embedded ("designated Datalogic Product"), in machine-readable form
only, solely for End User's internal business purposes. This Agreement does
not convey ownership of the Software to End User. Title to the Software
shall be and remain with Datalogic or the third party from whom Datalogic
has obtained a licensed right. As used in this Agreement, the term "pur-

2 Gryphon™ L GD4300

chase" or its equivalents when applied to the Software shall mean "acquire
under license." End User is not entitled to receipt or use of the source code
to any Software.

2.2 End User shall not copy, modify, decompile, disassemble, reverse engineer,
or otherwise reproduce or remanufacture the Software, whether modified
or unmodified, nor sell, assign, sublicense, distribute, lend, rent, give, or oth­erwise transfer the Software to any other person or organization, for pur­poses other than as expressly provided in this Agreement, without
Datalogic's prior written consent.

3. Transfers, Support.

3.1 Any copying, installing, reproduction, remanufacture, reverse engineering,
electronic transfer, or other use of the Software on other than the desig­nated Datalogic Product will be a material breach of this Agreement. How­ever, Datalogic may elect not to terminate this Agreement or the granted
licenses, but instead may elect to notify End User that End User is deemed
to have ordered and accepted a license for each breaching use. End User
shall pay Datalogic the applicable list price for such licenses as of the date of
such breach.

3.2 End User shall not sell, assign, sublicense, distribute, lend, rent, give, or oth­erwise transfer the Datalogic Product to any third party unless such third
party agrees with Datalogic in writing to be bound by the terms and condi­tions of this Agreement. Any such transfer of the Datalogic Product absent
such agreement shall be null and void.

3.3 End User may obtain support for Software from Datalogic at Datalogic's
standard support fees and under Datalogic's standard support terms and
conditions in effect at the time the support is requested.

4. Intellectual Property.

End User acknowledges that the Software constitutes valuable trade secrets of Data­logic or Datalogic's third party licensors and that the Software is protected by intel­lectual property laws and treaties. The license set forth in this Agreement does not
transfer to End User any ownership of Datalogic's or its third party licensors' copy­rights, patents, trademarks, service marks, trade secrets, or other intellectual prop­erty rights and End User shall have no right to commence any legal actions to obtain
such rights. End User shall not remove, modify, or take any other action that would
obscure any copyright, trademark, patent marking, or other intellectual property
notices contained in or on the Datalogic Product.

5. Proprietary Information.

5.1 End User acknowledges that Proprietary Information is the confidential,

proprietary, and trade secret property of Datalogic and Datalogic's third
party licensors and End User acquires no right or interest in any Proprietary
Information.

5.2 End User shall not disclose, provide, or otherwise make available the Propri-

etary Information of Datalogic or its third party licensors to any person
other than End User's authorized employees or agents who are under confi­dentiality agreement, and End User shall not use the Proprietary Informa­tion other than in conjunction with use of the Datalogic Product exclusively
for End User's internal business purposes. End User shall take steps to pro­tect the Proprietary Information no less securely than if it were End User's
own intellectual property.

5.3 The provisions of this Proprietary Information Section shall survive and con-

tinue for five (5) years after the termination of this Agreement.

6. Limited Warranty.

6.1 Datalogic warrants that, under normal use and operation, the Datalogic
Product will conform substantially to the applicable Documentation for the
period specified in the Documentation. During this period, for all reproduc­ible nonconformities for which Datalogic has been given written notice,
Datalogic will use commercially reasonable efforts to remedy nonconformi­ties verified by Datalogic. End User agrees to supply Datalogic with all rea­sonably requested information and assistance necessary to help Datalogic
in remedying such nonconformities. For all defects reported to Datalogic
within the warranty period, Datalogic's liability is limited to providing End
User with one copy of corrections or responding to End User's problem

Quick Reference Guide 3

reports according to Datalogic's standard assistance practices. Datalogic
does not warrant that the product will meet End User's requirements or that
use of the product will be uninterrupted or error free, or that Datalogic's
remedial efforts will correct any nonconformance. This limited warranty
does not cover any product that have been subjected to damage or abuse,
whether intentionally, accidentally, or by neglect, or to unauthorized repair
or unauthorized installation, and shall be void if End User modifies the prod­uct, uses the product in any manner other than as established in the Docu­mentation, or if End User breaches any of the provisions of this Agreement.

6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS
PROVIDED "AS IS" AND DATALOGIC MAKES NO WARRANTIES OF ANY KIND,
EXPRESS OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT,
AND SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANT­ABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

7. Infringement.

7.1 Datalogic will defend End User against any claim in a lawsuit that the Data­logic Product furnished hereunder infringe a United States patent or copy­right of a third party and Datalogic will pay any damages finally awarded
against End User by a court of competent jurisdiction that are attributable
to such claim or will pay End User's part of any settlement that is attribut­able to such claim, provided, that 1) End User notifies Datalogic promptly in
writing of the claim, 2) Datalogic controls the defense or settlement of the
claim, and 3) End User cooperates fully with Datalogic in such defense or
settlement. All notices of a claim should be sent to Datalogic Scanning, Inc.,
Legal Department, 959 Terry Street, Eugene, OR 97402.

7.2 In the defense or settlement of any such claim, Datalogic may, at its option,

1) procure for End User the right to continue using the Datalogic Product, 2)
modify the Datalogic Product so that it becomes non-infringing, 3) replace
the Datalogic Product with an equivalent product not subject to such claim,
or 4) provide End User an opportunity to return the Datalogic Product and
receive a refund of the purchase price paid, less a reasonable allowance for
use.

7.3 Datalogic shall have no liability to End User for claims of infringement based
upon 1) the use of any Datalogic Product in combination with any product
which Datalogic has not either furnished or authorized for use with such
Datalogic Product 2) the use of any Datalogic Product designed, manufac­tured, or modified to the specifications of End User, or 3) End User's modifi­cation of the Datalogic Product without written authorization from
Datalogic.

7.4 THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE OBLIGATION
CONCERNING CLAIMS OF PATENT, COPYRIGHT, OR OTHER INTELLECTUAL
PROPERTY INFRINGEMENT, CANCELS AND SUPERCEDES ANY PRIOR AGREE­MENTS, WHETHER ORAL OR WRITTEN, BETWEEN THE PARTIES CONCERNING
SUCH CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST,
CONTEMPORANEOUS, OR FUTURE AGREEMENTS OR DEALINGS BETWEEN
THE PARTIES, WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A
FUTURE WRITING SIGNED BY BOTH PARTIES.

8. Limitation Of Liability.

EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE FOR ANY
CLAIMS AGAINST END USER BY ANY OTHER PARTY. IN NO EVENT SHALL DATALOGIC'S
LIABILITY FOR DAMAGES, IF ANY, WHETHER BASED UPON CONTRACT, TORT
(INCLUDING NEGLIGENCE), PRODUCT LIABILITY, STRICT LIABILITY, WARRANTY, OR
ANY OTHER BASIS, EXCEED THE PRICE OR FEE PAID BY END USER FOR THE DATA­LOGIC PRODUCT. UNDER NO CIRCUMSTANCES SHALL DATALOGIC BE LIABLE TO END
USER OR ANY THIRD PARTY FOR LOST PROFITS, LOST DATA, INTERRUPTION OF BUSI­NESS OR SERVICE, OR FOR ANY OTHER SPECIAL, CONSEQUENTIAL, CONTINGENT,
INDIRECT, INCIDENTAL, PUNITIVE, EXEMPLARY, OR OTHER SIMILAR DAMAGES, EVEN
IF DATALOGIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

9. Government Restricted Rights; International Use.

9.1 Use, duplication, or disclosure of the Software by the U.S. Government is
subject to the restrictions for computer software developed at private
expense as set forth in the U.S. Federal Acquisition Regulations at FAR

52.227-14(g), or 52.227-19 or in the Rights in Technical Data and Computer
Software clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable.

4 Gryphon™ L GD4300

9.2 If End User is using the Datalogic Product outside of the United States, End
User must comply with the applicable local laws of the country in which the
Datalogic Product is used, with U.S. export control laws, and with the Eng­lish language version of this Agreement. The provisions of the "United
Nations Convention on International Sale of Goods" shall not apply to this
Agreement.

10. Termination.

10.1 Either party may terminate this Agreement or any license granted under
this Agreement at any time upon written notice if the other party breaches
any provision of this Agreement.

10.2 Upon termination of this Agreement, End User immediately shall cease
using any nonembedded software and shall return to Datalogic or destroy
all non-embedded software covered by this Agreement, and shall furnish
Datalogic with a certificate of compliance with this provision signed by an
officer or authorized representative of End User. For embedded software,
End User agrees to sign a waiver prepared by Datalogic concerning further
use of the embedded Software. End User's resumed or continued use of the
embedded Software after termination shall constitute End User's agree­ment to be bound by the terms and conditions of this Agreement for such
use.

11. General Provisions.

11.1 Entire Agreement; Amendment. This document contains the entire agreement
between the parties relating to the licensing of the Software and super­sedes all prior or contemporaneous agreements, written or oral, between
the parties concerning the licensing of the Software. This Agreement may
not be changed, amended, or modified except by written document signed
by Datalogic.

11.2 Notice. All notices required or authorized under this Agreement shall be given
in writing, and shall be effective when received, with evidence of receipt.
Notices to Datalogic shall be sent to the attention of Contract Administra­tion, Datalogic Scanning, Inc., 959 Terry Street, Eugene, OR 97402, or such
other address as may be specified by Datalogic in writing.

11.3 Waiver. A party's failure to enforce any of the terms and conditions of this
Agreement shall not prevent the party's later enforcement of such terms
and conditions.

11.4 Governing Law; Venue: This Agreement and the rights of the parties hereun­der shall be governed by and construed in accordance with the laws of the
State of Oregon U.S.A, without regard to the rules governing conflicts of law.
The state or federal courts of the State of Oregon located in either Mult­nomah or Lane counties shall have exclusive jurisdiction over all matters
regarding this Agreement, except that Datalogic shall have the right, at its
absolute discretion, to initiate proceedings in the courts of any other state,
country, or territory in which End User resides, or in which any of End User's
assets are located.

11.5 Attorneys' Fees. In the event an action is brought to enforce the terms and
conditions of this Agreement, the prevailing party shall be entitled to rea­sonable attorneys' fees, both at trial and on appeal.

- END -

Software Product Policy

Quick Reference Guide 5

Software Product Policy

Datalogic reserves the right to ship its products with the latest ver­sion of software/firmware available. This provides our customers
with the very latest in Datalogic software technology.
The only exception to this policy is when the buyer has a signed
contract with Datalogic that clearly defines the terms and condi­tions for making software/firmware changes in products shipped
to the buyer.

Customers Under Software Support

Customers that elect to subscribe to Datalogic Software Mainte­nance and Support Agreement will receive 30 days advance notifi­cation of: (1) the release of a new software version; and/or (2)
discontinuation of any prior software version that will no longer be
supported. Datalogic will provide maintenance for a fee that will
assist customers in transitioning to the next software version. If a
customer is currently using the software version being discontin­ued, the customer may elect to transition to any one of the newer
versions, depending on the hardware in use.
To arrange for a Software Maintenance and Support Agreement
please contact your Datalogic sales person.

Technical Features

6 Gryphon™ L GD4300

Technical Features

Item Description

Physical Characteristics

Color

White/Grey
Black/Grey

Dimensions

Height 7.1” / 181mm
Length 3.9” / 100mm
Width 2.8” / 71mm

Weight (without cable) Approximately 6.0 ounces/169 g

Electrical Characteristics

Voltage & Current

GD4330 model:

Input current at 5V±5% = 260 mA (max)

2.5 mA (USB suspend)
Standby (typical)  30mA

GD4310 model:

Input Power = 1.2W max in the 4.5÷14V range

2.5 mA (USB suspend)
Standby (typical): 30mA @5V, except 90mA @5V in IBM 46xx

Performance Characteristics

Light Source 650nm Class 2 Laser

Pitch (Yaw) ± 50°

Skew ± 65°

Roll (Tilt) ± 35°

Scan Angle 47° (normal) or 35° (narrow)

Depth of Field
(Typical)

5 mil - 1.4" to 6.22" (3,6cm to 15,8cm)

13 mil* – 0.87" to 18.7" (2,2cm to 47,5cm)

20 mil – up to 27.1" (to 69cm)

Minimum Element Width 4 mil

Print Contrast Minimum
(Typical)

15% minimum reflectance

Decode Capability

UPC/EAN/JAN, P2 /P5 add-ons; Code 39; Code 32; Code 128;
Code 128 ISBT; Code 128 add-ons; Interleaved 2 of 5; Standard
2 of 5; Code 11; Codabar; EAN 128; GS1 DataBar™ Omnidirec­tional, GS1 DataBar™ Limited, GS1 DataBar™ Expanded, Code 4,
Code 5, Follett 2 of 5.

Technical Features

Quick Reference Guide 7

* (13 mils DOF based on EAN. All others are Code 39. All labels grade A, typical environmental
light, 20°C, label inclination 10°)

Interfaces Supported

RS-232 Std., RS-232 Wincor-Nixdorf, RS-232 OPOS, IBM 46xx
(ports5B and 9B), USB Com Std., USB Keyboard, USB Alternate
Keyboard,USB OEM, Keyboard Wedge (AT with or w/o Alternate
Key, IBM AT PS2 with or w/o Alternate Key, PC-XT, IBM 3153,
IBM Terminals 31xx, 32xx,34xx, 37xx make only and make
break keyboard, Digital Terminals VT2x, VT3xx, VT4xx, and
Apple) and Wand Emulation.

User Environment

Operative Temperature 32° to 122° F (0° to 50° C)

Storage Temperature -4° to 158° F (-20° to 70° C)

Humidity Operating: 5% to 90% relative humidity, non condensing

Drop specifications 18 drops from 1.8 meters (5.9 feet) to concrete

Ambient Light immunity Up to 100,000 Lux

Contaminants IP52

ESD Level 16 KV

Regulatory

Electrical Safety IEC 60950-1 , CAN/CSA-C22.2 No. 60950-1-03; UL 60950-1

Laser Safety

EN/IEC 60825-1 Class 2
21 CFR 1040 (CDRH) (Class2)

Led class Safety IEC Class 1

EMI/RFI

North America (FCC) : Part 15 Class B, Canada ( IC) : ICES-003
Class B, European Union EMC Directive, Australian (C-tick) ,
Russia (Gost), Mexico (NOM NYCE), South Korea (KCC)

Connect/Disconnect Cable

8 Gryphon™ L GD4300

Connect/Disconnect Cable

Connect Host Interface

Keyboard Wedge Interface

RS-232 Interface

1

2

Aim and Scan

Quick Reference Guide 9

USB Interface

Aim and Scan

The area shown in green below illustrates the area of typical max­imum performance for the scanner.

3

012345

012345

Parts of the Reader

10 Gryphon™ L GD4300

Parts of the Reader

Scanning Modes

The reader can operate in one of several scanning modes:

Trigger Single —

When the trigger is pulled, scanning is activated

until one of the following occurs:

- a programmable duration

1

has elapsed

- a label has been read

- the trigger is released
This mode is associated with typical handheld reader operation:
when the trigger is pulled, scanning starts and the product scans
until the trigger is released, or a label is read, or the maximum pro­grammable duration

1

has elapsed.

Trigger Hold Multiple —

When the trigger is pulled, scanning
starts and the product scans until the trigger is released or a pro­grammable duration

1

has elapsed. Reading a label does not disable

scanning. Double Read Timeout

2

prevents undesired multiple

reads while in this mode.

Trigger Pulse Multiple —

When the trigger is pulled and released,
scanning is activated until programmable duration

1

has elapsed or
the trigger has been pulled again to transition to another state.
Double Read Timeout

2

prevents undesired multiple reads while in

this mode.

1. See the Product Reference Guide (PRG) for additional programmable fea­tures, in this case: Scanning Active Time.

2. Double Read Timeout is also programmed using the PRG.

Tri gge r

Scan
Window

LED

Scanning Modes

Quick Reference Guide 11

Flashing —

The reader flashes1 on and off regardless of the trigger

status.

Always On —

No trigger pull is required to read a barcode. Scan-

ning is continually on

2

.

Stand Mode —

No trigger pull is required to read a barcode. Scan-

ning is alternatively turned on and off.

Scan Mode = Trigger Single

Scan Mode = Trigger Hold Multiple

Scan Mode = Trigger Pulse Multiple

1. Controlled by Flash On Time and Flash Off Time. Use the PRG to program
these options.

2. For energy saving purposes, the Always On feature has a user program­mable timeout (default 5 hours of inactivity). A single manual trigger
pull is required to reactivate the scanner after the timeout.

Scanning Modes

12 Gryphon™ L GD4300

Scanning Modes — continued

Scan Mode = Flashing

Scan Mode = Always On

Scan Mode = Stand Mode

Troubleshooting

Quick Reference Guide 13

Troubleshooting

Problem Possible Cause Possible Solutions

Nothing happens when
the scan button is
pulled.

No power to the reader.

Check system power. Ensure
power supply is connected.

Interface or power cables
are loose.

Ensure all cable connections
are secure.

Laser comes on, but
barcode does not
decode.

Reader not programmed
for correct barcode type.

Ensure reader is pro­grammed to read the type
of barcode scanned. Refer to
the Product Reference Guide
(PRG) for more information.

Barcode label is unread­able.

Check the label to ensure it
is not defaced. Try scanning
another barcode type.

Distance between reader
and barcode is incorrect.

Move reader closer to or fur­ther from the barcode.

Barcode is decoded but
not transmitted to the
host.

Reader not programmed
for the correct host type.

Scan the appropriate host
type barcode. Refer to the
Product Reference Guide
(PRG) for more information.

For detailed troubleshooting, refer to the
Product Reference Guide.

LED and Beeper Indications

14 Gryphon™ L GD4300

LED and Beeper Indications

The reader’s beeper sounds and its LED illuminates to indicate
various functions or errors on the reader. A “Green Spot” also
lights to indicate a good read. The tables below list these indica­tions. One exception to the behaviors listed in the tables is that the
reader’s functions are programmable, and may or may not be
turned on. For example, certain indications, such as the power-up
beep can be disabled using programming barcode labels. Reference
the PRG for a more detailed list.

Indication LED Beeper

Power-up

LED flashes/blinks on
power-up, however, this may
be too rapid to view. With a
USB interface, the LED blinks
until enumeration with the
host is completed.

Reader beeps four times at
highest frequency and vol­ume upon power-up.

Good Read

LED behavior for this indica­tion is configurable using the
PRG.

One beep at current fre­quency, volume,
mono/bi-tonal setting upon
a successful label scan.

ROM Failure 200ms on / 200ms off

Reader sounds one error
beep at highest volume for
200 mS.

Limited Scanning
Label Read

N/A

Reader 'chirps' six times at
the highest frequency and
current volume.

Reader Disabled

The LED blinks continuously
100ms on / 900 ms off

N/A

Programming Barcodes

Quick Reference Guide 15

Programming Barcodes

For your convenience, this guide includes the programming bar­codes required to configure the reader for use with different inter­face (terminal/host) types.

See the Product Reference Guide (PRG) for more complete infor­mation about programming and configurable features. You can
download the latest version of the PRG and any other available
publications for the reader from the website listed on the back cov­er of this manual.

Resetting the Standard Product
Defaults

If you aren’t sure what programming options are in your reader, or
you’ve changed some options and want the factory settings re­stored, scan the Factory Default Settings barcode below. This will
copy the factory configuration for the currently active interface to
the current configuration.

Factory Default Settings

Some interfaces require the scanner to start in
the disabled state when powered up. If addi­tional scanner configuration is desired while in
this state, pull the trigger and hold it for five
seconds. The scanner will change to a state that
allows programming with barcodes.

Programming Barcodes

16 Gryphon™ L GD4300

RS-232 Interface

To use an RS-232 interface, scan the barcode for the desired
RS-232 host type.

Select RS-232 Standard

Select RS-232 Wincor Nixdorf

Select RS-232 OPOS (for use with OPOS/UPOS/JavaPOS)

IBM Interface

Select IBM Port 5B

Select IBM Port 9B

Programming Barcodes

Quick Reference Guide 17

USB Interface

The reader attaches directly to a USB host, or a powered USB hub,
and is powered by it. No additional power supply is required.
When using a USB interface, the reader auto-detects the USB ca­ble and defaults to either the USB keyboard interface (GD4330)
or USB-OEM interface (GD4310).

Select USB Keyboard (with standard key encoding)

Select USB-COM-STD

1

(simulates RS-232 standard interface)

Select USB Alternate Keyboard (with alternate key encoding)

Select USB OEM

Select USB-KBD-APPLE (for Apple computers)

1. Download the correct USB Com driver from www.datalogic.com.

Programming Barcodes

18 Gryphon™ L GD4300

Keyboard Wedge Interface

To use a Keyboard Wedge interface, scan the barcode for the de­sired keyboard type.

Select KBD-AT

(AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95

w/Standard Key Encoding)

Select KBD-AT-NK

(IBM AT PS2 with standard key encoding but without external keyboard)

Select KBD-AT-ALT

(AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95

w/Alternate Key)

Select KBD-AT-ALT-NK (for IBM AT PS2 with alternate key

encoding but without external keyboard)

Programming Barcodes

Quick Reference Guide 19

Keyboard Wedge Interface — continued

Select KBD-XT (PC/XT w/Standard Key Encoding)

Select KBD-IBM-3153 (for IBM Terminal 3153)

Select KBD-IBM-M

(for IBM Terminals 31xx, 32xx, 34xx, 37xx make only keyboard)

Select KBD-IBM-MB

(for IBM Terminals 31xx, 32xx, 34xx, 37xx make break keyboard)

Select KBD-DIG-VT

(for DIGITAL Terminals VT2xx, VT3xx, VT4xx)

Ergonomic Recommendations

20 Gryphon™ L GD4300

Ergonomic Recommendations

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

Regulatory Information

All models are designed to be compliant with rules and regulations
in locations they are sold and will be labeled as required.
Any changes or modifications to equipment not expressly ap­proved by Datalogic could void the user's authority to operate the
equipment.

Power Supply

This device is intended to be connected to a UL Listed/CSA Cer­tified computer which supplies power directly to the reader or else
be supplied by UL Listed/CSA Certified Power Unit marked
“Class 2” or LPS power source rated 4.5-14 minimum 600mA for
GD4310 or rated 5.2V minimum 600mA for GD4330, which
supplies power directly to the reader via the power connector of the
cable.
Use only authorized power supplies supplied by your Datalogic re­seller. The use of any other power supplies can damage the reader
and void your warranty.

CAUTION

To avoid or minimize the potential risk of ergonomic
injury, follow the recommendations below. Consult
with your local Health & Safety Manager to ensure
that you are adhering to your company’s safety pro­grams to prevent employee injury.

For USB Power Off Terminal applications, attach to
USB 1.0, 1.1 or 2.0 host device only.

Regulatory Information

Quick Reference Guide 21

Laser Safety Compliance

The laser scanner conforms to the applicable requirements of both
CDRH 21 CFR 1040 and EN60825-1 at the date of manufacture.
The laser light is visible to the human eye and is emitted from the
output window.

The following information is shown on the laser scanner device:

CAUTION

Use of controls or adjustments or performance of
procedures other than those specified herein
may result in exposure to hazarouds visible laser
light.

The laser scanner utilizes a low-power laser
diode. Although staring directly at the laser
beam momentarily causes no known biological
damage, avoid staring at the beam as one would
any very strong light source, such as the sun.
Avoid allowing the laser beam to hit the eye of
an observer, even through reflective surfaces
such as mirrors, etc.

ITALIANO LUCE LASER

NON FISSARE IL RAGGIO
APPARECCHIO LASER DI CLASSE 2

FRANÇAIS RAYON LASER

EVITER DE REGARDER LE RAYON
APPAREIL LASER DE CLASSE 2

DEUTCH LASERSTRAHLUNG

NICHT IN DEN STRAHL BLICKEN
PRODUKT DER LASERKLASSE 2

ESPAÑOL RAYO LÁSER

NO MIRAR FIJO EL RAYO
APARATO LÁSERDE CLASE 2

Regulatory Information

22 Gryphon™ L GD4300

China RoHS

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

Chromium

(Cr(VI))

Polybrominated

biphenyls

(PBB)

Polybrominated

diphenyl ethers

(PBDE)

᦭Ქ᦭ኂ‛凝ᚗర⚛

PART

ㇱઙฬ⒓

卋

ᳮ

叏

౐ચ卲 ᄙᄽ侶૖ ᄙᄽԲ૖ㅘ

Printed Circuit Board Assembly

⬉䏃ᵓ㒘ӊ

X O O O O O

Assy, Optics Block

ܝᄺ㒘ӊ

X O O O O O

Assy, Module

ܝᄺ㒘ӊ

X O O O O O

O



ઍ⴫ᱝẊㇱઙ⊛ᚲ᦭ဋ凝ޗறխࢬܶ具Ẋڶڶ୭凝݁܅Պխ䦀Գا٥ࡉ㧺ஒ䣈䢓ຝᚲ咒ؒ⊛

ޝ䶣՗ஒ䣈঴խڶڶ୭凝ૻၦ૞ޣρ(SJ/T 11363-2006) 億ࡳૻၦޕ

X:ઍ⴫ᱝẊㇱઙᚲ↪⊛ဋ凝ޗறխ, ⥋ዋ᦭৻㮕᧚ᢱ౔ᚲ฽⊛᦭Ქ᦭ኂ‛凝೏Պխ䦀Գا٥ࡉ㧺ஒ䣈䢓ຝᚲ咒ؒ⊛

ޝ䶣՗ஒ䣈঴խڶڶ୭凝ૻၦ૞ޣρ(SJ/T 11363-2006) 億ࡳૻ㊂

Regulatory Information

Quick Reference Guide 23

Radio Frequency Interference
Requirements

This equipment has been tested and found to comply with the lim­its for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
However there is no guarantee that interference will not occur in a
particular installation. If the equipment does cause harmful inter­ference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following mea­sures:

• Re-orient or relocate the receiving antenna.

• Increase the separation between the equipment and
receiver.

• Connect the equipment into an outlet on a circuit differ­ent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician
for help.

Radio Frequency Interference
Requirements - Canada

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.

CAUTION

The user is cautioned that changes or modifi­cations not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.

Reader Labeling

24 Gryphon™ L GD4300

Reader Labeling

Labels are shown here to illustrate their location only. Please view
the labels on your product for actual details.

English

For information about the disposal of Waste Electrical and Electronic Equipment (WEEE), please
refer to the website at www.scanning.datalogic.com.

Italian

Per informazioni sullo smaltime nto delle apparecchiature elettr iche ed elettroniche consultare il
sito Web www.scanning.datalogic.com.

French

Pour toute information relative à l’élimination des déchets électroniques (WEEE), veuillez
consulter le site internet www.scanning.datalogic.com.

German

Informationen zur Entsorgung von Elektro- und Elektronik- Altgeräten (WEEE) erhalten Sie auf
der Webseite www.scanning.datalogic.com.

Spanish

Si desea información acerca de los procedimientos para el desecho de los residuos del equipo
eléctrico y electrónico (WEEE), visite la página Web www.scanning.datalogic.com.

Portuguese

Para informações sobre a disposição de Sucatagem de Equipamentos Elétricos e Eletrônicos
(WEEE -Waste Electrical and Electronic Equipment), consultar o site web
www.scanning.datalogic.com.

Chinese

有关处理废弃电气电子设备 (WEEE) 的信息， 请参考 Datalogic 公
司的网站： http://www.scanning.datalogic.com/。

Japanese

廃電気電子機器 (ＷＥＥＥ) の処理についての関連事項は
Datalogic のサイト www.scanning.datalogic.com をご参照下さい。

Waste Electrical and Electronic
Equipment (WEEE) Statement

Regulatory & Serial Numbers

Reader Labeling

Quick Reference Guide 25

Warranty

Datalogic warrants to Customer that Datalogic's produc ts will be free from defects in materials and
workmanship for a period of 5 years from product shipment. This warranty does not extend to bat­teries and cables. As consumable items batteries and cables carry a 90 day warranty from time of
purchase for DOA (dead on arrival) defects. In order to obtain service under this Warranty, Cus­tomer must notify Datalogic of the claimed defect before the expiration of the Warranty period
and obtain from Datalogic a return authorization number for return of the product to designated
Datalogic service center. If Datalogic determines Customer’s claim is valid, Datalogic will repair or
replace product without additional charge for parts and labor. Customer shall be responsible for
packaging and shipping the product to the designated Datalogic service center, with shipping
charges prepaid. Datalogic shall pay for the return of the product to Customer if the shipment is to
a location within the country in which the Datalogic service center is located. Customer shall be
responsible for paying all shipping charges, duties, taxes, and any other charges for products
returned to any other locations.
Warranty is subject to the limitations and exclusions set forth in the paragraphs that follow.
WARRANTY SET FORTH ABOVE IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING MERCHANTABILITY AND FITNESS.

Exclusions

Warranty coverage shall not apply to any claimed defect, failure or damage which Datalogic deter­mines was caused by: improper use of product; failure to provide product maintenance, including
but not limited to cleaning of the upper window in accordance with product manual; installation
or service of product by other than Datalogic representatives; use of product with any other instru­ment, equipment or apparatus; modification or alteration of product. External cables and replace­ment of upper window/cartridge due to scratching, stains or other degradation will not be
covered under the Warranty. External power supplies returned for service must be accompanied
by the original product for performance of service.

Limitation of Liability

Datalogic's REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCT AS SET FORTH ABOVE IS THE CUS­TOMER’S SOLE AND EXCLUSIVE REMEDY ON ACCOUNT OF CLAIMS OF BREACH OF WARRANTY OR
PRODUCT DEFECT. UNDER NO CIRCUMSTANCES WILL Datalogic BE LIABLE TO CUSTOMER OR ANY
THIRD PARTY FOR ANY LOST PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL
OR CONTINGENT DAMAGES REGARDLESS OF WHETHER Datalogic HAD ADVANCE NOTICE OF THE
POSSIBILITY OF SUCH DAMAGES.

Assignment

Customer may not assign or otherwise transfer its rights or obligations under Warranty except to a
purchaser or transferee of product. No attempted assignment or transfer in violation of this provi­sion shall be valid or binding upon Datalogic.

Risk of Loss

Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic shall
assume risk of loss or damage for product in Datalogic's possession or product being returned to
Customer by Datalogic, except such loss or damage as may be caused by the negligence of Cus­tomer, its agents or employees. In the absence of specific written instructions for the return of
product to Customer, Datalogic will select the carrier, but Datalogic shall not thereby assume any
liability in connection with the return shipment.

Reader Labeling

26 Gryphon™ L GD4300

NOTES

dichiara che
declares that the
déclare que le
bescheinigt, daß das Gerät
declare que el

GD43xx

sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:

2004/108/EC EMC Directive

Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla
sicurezza dei prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility and
product safety.
Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité
des produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit
und Produktsicherheit entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad
electromagnética y las Medidas de seguridad relativas al producto.

Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:

Datalogic Scanning Group Srl
Via S. Vitalino, 13
Lippo di Calderara di Reno (BO)
40012 Italy

e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos

EN 55022 (CLASS A ITE),SEPTEMBER 1998:
AMENDMENT A1 (CLASS A ITE), OCTOBER 2000

LIMITS AND METHODS OF MEASUREMENTS OF RADIO DISTURBANCE CHAR-

ACTERISTICS OF INFORMATION TECHNOLOGY EQUIPMENTS

EN 55024, SEPTEMBER 1998:
AMENDMENT A1:2001+A2:2003

INFORMATION TECHNOLOGY EQUIPMENT
IMMUNITY CHARACTERISTICS
LIMITS AND METHODS OF MEASUREMENT

Lippo di Calderara, August 03rd, 2009

Ruggero Cacioppo

Quality Assurance Manager

DECLARATION OF CONFORMITY

09

Australia

Datalogic Scanning Pty Ltd
Telephone: [61] (2) 9870 3200
[e-mail]

France and Benelux

Datalogic Scanning SAS
Telephone: [33].01.64.86.71.00
[e-mail]

Germany

Datalogic Scanning GmbH
Telephone: [phone]
[e-mail]

India

Datalogic Scanning India
Telephone: 91- 22 - 64504739
[e-mail]

Italy

Datalogic Scanning SpA
Telephone: [39] (0) 39/62903.1
[e-mail]

Japan

Datalogic Scanning KK
Telephone: [phone]
[e-mail]

Latin America

Datalogic Scanning, Inc
Telephone: [phone]
[e-mail]

Singapore

Datalogic Scanning Singapore PTE LTD
Telephone: [phone]
[e-mail]

Iberia

Datalogic Scanning SAS Sucursal en España
Telephone: [phone]
[e-mail]

United Kingdom

Datalogic Scanning LTD
Telephone: [phone]
[e-mail]

Datalogic Scanning, Inc.

959 Terry Street
Eugene, OR 97402
USA
Telephone: [phone]
Fax: [phone]

©2010 Datalogic Scanning, Inc. R44-3037 (Rev. A) 01/2010

www.scanning.datalogic.com

www.logiscenter.com
902 050 030

www.logiscenter.dewww.logiscenter.it

02 479 216 97

www.logiscenter.pt
308 800 842

About LOGISCENTER

Grupo Logiscenter is the leading provider in Europe of automatic identification
and data capture equipments. Our products include barcode printing and reading
devices, mobile computing devices, wireless access points, identification cards,
and consumables.

Reasons to work with us

Our customers come first.

Our objective is not only selling our products but also
holding a long-lasting relationship with our customers, based on the befenits and
advantages we create for you and your company.

The best brands. We offer products from the best manufacturers worldwide.
Expert technical support team. Our support staff are experts in the products we sell.

But not just the products, they can tell you the best solution for your particular problem or
need.

Largest stock. We have a permament stock of more than 12,000 products.
Same-day shipping. For all orders placed and confirmed before 16:00 on working days.
Best prices. With Logiscenter, you can be sure that you are paying a fair price for your

products we will not overcharge you.

Easy returns. Damaged or defective products can be returned easily, for an exchange or

reimbursement.

Our Brands

More than 3000 customers in 15 countries • More than 12,000 products in stock

Solutions for: Industry • Consumer • Mobility
Transportation and Logistics • Retail • Health

All Brands

Technical Service

Solutions for Automatic Identification,
Barcodes and Mobility

GRUPO LOGISCENTER, S.L. - The Barcode Solutions Center

Av. Puente Cultural 10-A • 28702 San Sebastián de los Reyes - MADRID (Spain)

CIF ES B85538601 • [e-mail] • www.logiscenter.com

Label printers Barcode readers

Data terminals & PDA

PVC card printers RFID

Consumables

(labels, ribbons, PVC cards)

[e-mail]