Datalogic Gryphon I CHR-GM40 Quick Reference Manual

Gryphon™ I CHR-GM40

Quick Reference Guide

Datalogic Scanning, Inc.

959 Terry Street
Eugene, Oregon 97402
Telephone: [phone]
Fax: [phone]
An Unpublished Work - All rights reserved. No part of the contents of this documenta­tion or the procedures described therein may be reproduced or transmitted in any
form or by any means without prior written permission of Datalogic Scanning, Inc. or
its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”). Owners of Datalogic
products are hereby granted a non-exclusive, revocable license to reproduce and
transmit this documentation for the purchaser's own internal business purposes. Pur­chaser shall not remove or alter any proprietary notices, including copyright notices,
contained in this documentation and shall ensure that all notices appear on any
reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions
by contacting your Datalogic representative. Electronic versions may either be down­loadable from the Datalogic website (www.scanning.datalogic.com) or provided on
appropriate media. If you visit our website and would like to make comments or sug­gestions about this or other Datalogic publications, please let us know via the "Con­tact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is
complete and accurate, however, Datalogic reserves the right to change any specifica­tion at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in
many countries, including the U.S.A. and the E.U. All other brand and product names
referred to herein may be trademarks of their respective owners.

Patents

Design Pat.: EP 870,787.
US Pat.: 5,144,118; 5,311,000; 5,481,098; 5,493,108; 5,929,421;
5,992,740; 6,098,883; 6,260,764; 6,443,360 B1; 6,517,003 B2;
6,631,846 B2; 6,808,114 B1; 6,817,525 B2; 6,997,385 B2; 7,075,663
B2; 7,387,246 B2.
European Pat.: 789,315 B1; 926,620 B1; 962,880 B1; 997,760 B1;
1,128,314 B1; 1,128,315 B1; 1,164,536 B1; 1,396,811 B1.

Additional patents pending.

TABLE OF CONTENTS

Configuring the Charger ............................................................................ 5

Changing the Charger Position ..................................................... 5

Using the CHR-GM40 Charger Only ........................................................ 8

Base LEDs ............................................................................................... 8

Technical Specifications .............................................................................. 9

Ergonomic Recommendations ...............................................................10

Regulatory Information .............................................................................10

Power Supply .....................................................................................10

Charger Labeling ..............................................................................11

WEEE Statement ...............................................................................12

Warranty .........................................................................................................13

NOTES

Quick Reference Guide 1

Datalogic Scanning, Inc.

GRYPHON™ PRODUCT SERIES

END USER LICENSE AGREEMENT

Notice to End User: The Datalogic Product you have acquired contains embed­ded Software, which is integral to the product's operation. This Software is
being provided to you under license, subject to the terms and conditions of this
Agreement. If you use the Datalogic Product, you will be deemed to have
accepted the terms and conditions of this Agreement. If you do not intend to be
bound to the terms of this Agreement, Datalogic is not willing to license the
Software to you, you may not use the Datalogic Product or the Software, and
you must contact the party from whom you acquired the Datalogic Product for
instructions.

This End User Software License Agreement ("Agreement") is a legally binding agree­ment governing the licensing of the Software and Documentation by Datalogic Scan­ning, Inc. and its Affiliates ("Datalogic") to the entity or person who has purchased or
otherwise acquired a Datalogic Product ("End User"). For purposes of this Agreement,
any software that is associated with a separate end-user license agreement is licensed
to you under the terms of that license agreement. Datalogic and End User hereby
agree as follows:

1. Definitions.

1.1 "Affiliate" means a business entity currently existing or later acquired that controls,
is controlled by, or is under common control with Datalogic S.p.A.

1.2 "Documentation" means materials such as user's guides, program reference
guides, quick reference guides, manuals, or similar materials associated with or
related to the Datalogic Product, whether in printed, "online", or other form.

1.3 "Proprietary Information" means: (a) source code, object code, software, docu­mentation, and any related internal design, system design, data base design,
algorithms, technology, technical data or information, implementation tech­niques, and trade secrets related to the Software, (b) any other trade secrets
marked appropriately or identified as proprietary or confidential, and (c) any
information that End User, under the circumstances, should recognize as confi­dential. Proprietary Information does not include any information that the
receiving party can establish was (1) in the public domain, (2) already in the
receiving party's possession or rightfully known prior to receipt, (3) rightfully
learned from a third party not in violation of any other's proprietary rights, or
(4) independently developed without access to Proprietary Information.

1.4 "Datalogic Product" means the Datalogic® Gryphon™ series scanner product,
including all embedded Software in and all Documentation related to such
product, which has been purchased or otherwise acquired by End User,
whether obtained directly or indirectly from Datalogic.

1.5 "Software" means any software or computer programs of Datalogic or its third
party licensors in machine readable form which is embedded in the Datalogic
Product, whether obtained directly or indirectly from Datalogic, including any
replacement, update, upgrade, enhancement or modification.

2. Scope Of License Granted.

2.1 Datalogic grants to End User a non-exclusive, non-transferable, perpetual license
to use the Software, solely on the Datalogic Product in which it is embedded
("designated Datalogic Product"), in machine-readable form only, solely for
End User's internal business purposes. This Agreement does not convey own­ership of the Software to End User. Title to the Software shall be and remain
with Datalogic or the third party from whom Datalogic has obtained a licensed
right. As used in this Agreement, the term "purchase" or its equivalents when
applied to the Software shall mean "acquire under license." End User is not
entitled to receipt or use of the source code to any Software.

2.2 End User shall not copy, modify, decompile, disassemble, reverse engineer, or
otherwise reproduce or remanufacture the Software, whether modified or
unmodified, nor sell, assign, sublicense, distribute, lend, rent, give, or other­wise transfer the Software to any other person or organization, for purposes
other than as expressly provided in this Agreement, without Datalogic's prior
written consent.

3. Transfers, Support.

3.1 Any copying, installing, reproduction, remanufacture, reverse engineering,
electronic transfer, or other use of the Software on other than the designated
Datalogic Product will be a material breach of this Agreement. However, Data-

2 Gryphon™ I GM4100

logic may elect not to terminate this Agreement or the granted licenses, but
instead may elect to notify End User that End User is deemed to have ordered
and accepted a license for each breaching use. End User shall pay Datalogic
the applicable list price for such licenses as of the date of such breach.

3.2 End User shall not sell, assign, sublicense, distribute, lend, rent, give, or other­wise transfer the Datalogic Product to any third party unless such third party
agrees with Datalogic in writing to be bound by the terms and conditions of
this Agreement. Any such transfer of the Datalogic Product absent such agree­ment shall be null and void.

3.3 End User may obtain support for Software from Datalogic at Datalogic's stan­dard support fees and under Datalogic's standard support terms and condi­tions in effect at the time the support is requested.

4. Intellectual Property.

End User acknowledges that the Software constitutes valuable trade secrets of Data­logic or Datalogic's third party licensors and that the Software is protected by intellec­tual property laws and treaties. The license set forth in this Agreement does not transfer
to End User any ownership of Datalogic's or its third party licensors' copyrights, patents,
trademarks, service marks, trade secrets, or other intellectual property rights and End
User shall have no right to commence any legal actions to obtain such rights. End User
shall not remove, modify, or take any other action that would obscure any copyright,
trademark, patent marking, or other intellectual property notices contained in or on the
Datalogic Product.

5. Proprietary Information.

5.1 End User acknowledges that Proprietary Information is the confidential, pro­prietary, and trade secret property of Datalogic and Datalogic's third party
licensors and End User acquires no right or interest in any Proprietary Informa­tion.

5.2 End User shall not disclose, provide, or otherwise make available the Proprie­tary Information of Datalogic or its third party licensors to any person other
than End User's authorized employees or agents who are under confidentiality
agreement, and End User shall not use the Proprietary Information other than
in conjunction with use of the Datalogic Product exclusively for End User's
internal business purposes. End User shall take steps to protect the Proprietary
Information no less securely than if it were End User's own intellectual prop­erty.

5.3 The provisions of this Proprietary Information Section shall survive and con­tinue for five (5) years after the termination of this Agreement.

6. Limited Warranty.

6.1 Datalogic warrants that, under normal use and operation, the Datalogic Prod­uct will conform substantially to the applicable Documentation for the period
specified in the Documentation. During this period, for all reproducible non­conformities for which Datalogic has been given written notice, Datalogic will
use commercially reasonable efforts to remedy nonconformities verified by
Datalogic. End User agrees to supply Datalogic with all reasonably requested
information and assistance necessary to help Datalogic in remedying such
nonconformities. For all defects reported to Datalogic within the warranty
period, Datalogic's liability is limited to providing End User with one copy of
corrections or responding to End User's problem reports according to Data­logic's standard assistance practices. Datalogic does not warrant that the prod­uct will meet End User's requirements or that use of the product will be
uninterrupted or error free, or that Datalogic's remedial efforts will correct any
nonconformance. This limited warranty does not cover any product that have
been subjected to damage or abuse, whether intentionally, accidentally, or by
neglect, or to unauthorized repair or unauthorized installation, and shall be
void if End User modifies the product, uses the product in any manner other
than as established in the Documentation, or if End User breaches any of the
provisions of this Agreement.

6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS PRO­VIDED "AS IS" AND DATALOGIC MAKES NO WARRANTIES OF ANY KIND,
EXPRESS OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT,
AND SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABIL­ITY AND FITNESS FOR A PARTICULAR PURPOSE.

7. Infringement.

7.1 Datalogic will defend End User against any claim in a lawsuit that the Datalogic
Product furnished hereunder infringe a United States patent or copyright of a
third party and Datalogic will pay any damages finally awarded against End
User by a court of competent jurisdiction that are attributable to such claim or
will pay End User's part of any settlement that is attributable to such claim,

Quick Reference Guide 3

provided, that 1) End User notifies Datalogic promptly in writing of the claim,

2) Datalogic controls the defense or settlement of the claim, and 3) End User
cooperates fully with Datalogic in such defense or settlement. All notices of a
claim should be sent to Datalogic Scanning, Inc., Legal Department, 959 Terry
Street, Eugene, OR 97402.

7.2 In the defense or settlement of any such claim, Datalogic may, at its option, 1)
procure for End User the right to continue using the Datalogic Product, 2)
modify the Datalogic Product so that it becomes non-infringing, 3) replace the
Datalogic Product with an equivalent product not subject to such claim, or 4)
provide End User an opportunity to return the Datalogic Product and receive a
refund of the purchase price paid, less a reasonable allowance for use.

7.3 Datalogic shall have no liability to End User for claims of infringement based
upon 1) the use of any Datalogic Product in combination with any product
which Datalogic has not either furnished or authorized for use with such Data­logic Product 2) the use of any Datalogic Product designed, manufactured, or
modified to the specifications of End User, or 3) End User's modification of the
Datalogic Product without written authorization from Datalogic.

7.4 THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE OBLIGATION
CONCERNING CLAIMS OF PATENT, COPYRIGHT, OR OTHER INTELLECTUAL
PROPERTY INFRINGEMENT, CANCELS AND SUPERCEDES ANY PRIOR AGREE­MENTS, WHETHER ORAL OR WRITTEN, BETWEEN THE PARTIES CONCERNING
SUCH CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CON­TEMPORANEOUS, OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE PAR­TIES, WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A FUTURE
WRITING SIGNED BY BOTH PARTIES.

8. Limitation Of Liability.

EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE FOR ANY CLAIMS
AGAINST END USER BY ANY OTHER PARTY. IN NO EVENT SHALL DATALOGIC'S LIABILITY
FOR DAMAGES, IF ANY, WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLI­GENCE), PRODUCT LIABILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS,
EXCEED THE PRICE OR FEE PAID BY END USER FOR THE DATALOGIC PRODUCT. UNDER NO
CIRCUMSTANCES SHALL DATALOGIC BE LIABLE TO END USER OR ANY THIRD PARTY FOR
LOST PROFITS, LOST DATA, INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY OTHER
SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL, PUNITIVE, EXEMPLARY,
OR OTHER SIMILAR DAMAGES, EVEN IF DATALOGIC HAS BEEN ADVISED OF THE POSSIBIL­ITY OF SUCH DAMAGES.

9. Government Restricted Rights; International Use.

9.1 Use, duplication, or disclosure of the Software by the U.S. Government is sub­ject to the restrictions for computer software developed at private expense as
set forth in the U.S. Federal Acquisition Regulations at FAR 52.227-14(g), or

52.227-19 or in the Rights in Technical Data and Computer Software clause at
DFARS 252.227-7013(c)(1)(ii), whichever is applicable.

9.2 If End User is using the Datalogic Product outside of the United States, End
User must comply with the applicable local laws of the country in which the
Datalogic Product is used, with U.S. export control laws, and with the English
language version of this Agreement. The provisions of the "United Nations
Convention on International Sale of Goods" shall not apply to this Agreement.

10. Termination.

10.1 Either party may terminate this Agreement or any license granted under this
Agreement at any time upon written notice if the other party breaches any
provision of this Agreement.

10.2 Upon termination of this Agreement, End User immediately shall cease using
any nonembedded software and shall return to Datalogic or destroy all non­embedded software covered by this Agreement, and shall furnish Datalogic
with a certificate of compliance with this provision signed by an officer or
authorized representative of End User. For embedded software, End User
agrees to sign a waiver prepared by Datalogic concerning further use of the
embedded Software. End User's resumed or continued use of the embedded
Software after termination shall constitute End User's agreement to be bound
by the terms and conditions of this Agreement for such use.

11. General Provisions.

11.1 Entire Agreement; Amendment. This document contains the entire agreement
between the parties relating to the licensing of the Software and supersedes
all prior or contemporaneous agreements, written or oral, between the parties
concerning the licensing of the Software. This Agreement may not be
changed, amended, or modified except by written document signed by Data­logic.

11.2 Notice. All notices required or authorized under this Agreement shall be given in

4 Gryphon™ I GM4100

writing, and shall be effective when received, with evidence of receipt. Notices
to Datalogic shall be sent to the attention of Contract Administration, Data­logic Scanning, Inc., 959 Terry Street, Eugene, OR 97402, or such other address
as may be specified by Datalogic in writing.

11.3 Waiver. A party's failure to enforce any of the terms and conditions of this Agree­ment shall not prevent the party's later enforcement of such terms and condi­tions.

11.4 Governing Law; Venue: This Agreement and the rights of the parties hereunder
shall be governed by and construed in accordance with the laws of the State of
Oregon U.S.A, without regard to the rules governing conflicts of law. The state
or federal courts of the State of Oregon located in either Multnomah or Lane
counties shall have exclusive jurisdiction over all matters regarding this Agree­ment, except that Datalogic shall have the right, at its absolute discretion, to
initiate proceedings in the courts of any other state, country, or territory in
which End User resides, or in which any of End User's assets are located.

11.5 Attorneys' Fees. In the event an action is brought to enforce the terms and condi­tions of this Agreement, the prevailing party shall be entitled to reasonable
attorneys' fees, both at trial and on appeal.

- END -

Quick Reference Guide 5

CHR GM40

Quick Reference Guide

Configuring the Charger

The charger may be configured in desk application to hold the
reader in two different positions, either a horizontal or standing
position, in order to provide the most comfortable use depending
on needs.

Changing the Charger Position

The charger is configured by installing one of two sets of mechan­ical parts that come with the cordless kit. The default mounts
(shown below) provide three options: vertical (wall) mounting,
standing (45°), or horizontal mounting with a higher mechanical
retention of the scanner. Use the other mounts only for horizontal
mounting, with lower retention of the scanner. The different
parts may be interchanged to customize retention preferences.

A tool such as a rigid pen or a flat screwdriver can be used
to change the mounts. Do not allow it to touch the con­tacts.

Standing

Horizontal

Configuring the Charger

6 Gryphon™ I GM4100

1. Insert the appropriate parts for the desired charger posi­tion, as shown below.

2. Using your thumbs, push open the plastic tabs on the
bottom of the base to free the wing holders.

Standing,

Horizontal

Horizontal
or Vertical

Only

Tab

Tab

Configuring the Charger

Quick Reference Guide 7

3. The stand can now be repositioned in either horizontal
or standing position.

Horizontal

Standing

Using the CHR-GM40 Charger Only

8 Gryphon™ I GM4100

Using the CHR-GM40 Charger Only

Base LEDs

LEDs on the Gryphon I Base provide information about the
Base’s status, as shown in Figure 1.

Figure 1. Gryphon I Base LEDs

The following table describes the significance of each LED:

LED STATUS

Power on / Data Yellow On = Base is powered

Charging Red On = the Battery is in progress.

Charge completed Green On = the Battery is completely charged.

YELLOW LED

RED LED —
GREEN LED

Technical Specifications

Quick Reference Guide 9

Technical Specifications

The following table contains Physical and Performance Charac­teristics, User Environment and Regulatory information.

Item Description

Physical Characteristics

Color

White/Gray
Black/Gray

Dimensions

Height 5.5”/140 mm
Length 4.9”/125 mm
Width 3.9”/100 mm

Weight Approximately 8.1 ounces/230 g

Electrical Characteristics

Charge time for full charge
from full discharge

4 hours (fast charge) with the 12V external power
supply (b).

13 hours (slow charge) with 5V external power sup­ply (b).

Cradle consumption
and DC input supply range

Volt 4.75-14 VDC; Power <8W (a);

User Environment

Operating Temperature 32° to 122° F (0° to 50° C)

Charging Temperature 32° to 104° F (0° to 40° C)

Storage Temperature -4° to 158° F (-20° to 70° C)

Humidity

Operating: 5% to 90% relative humidity, non-con­densing

ESD Level 16 KV

Regulatory

Electrical Safety UL 60950, CSA C22.2 No. 60950, IEC 60950

EMI/RFI

North America (FCC) Part 15 Class B, Canada (IC)
ICES-003 Class B, Europe CE, Australia C-TICK, Russia
Gost.

(a) Typical input current measured under factory default configuration.
(b) Charge Times are much lower when battery is within daily typical operating
condition.

Ergonomic Recommendations

10 Gryphon™ I GM4100

Ergonomic Recommendations

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

Regulatory Information

All models are designed to be compliant with rules and regula­tions in locations they are sold and will be labeled as required.

Any changes or modifications to equipment, not expressly ap­proved by Datalogic could void the user's authority to operate the
equipment.

Power Supply

This device is intended to be connected to a UL Listed/CSA Cer­tified computer which supplies power directly to the reader or else
be supplied by UL Listed/CSA Certified Power Unit marked
“Class 2” or LPS power source rated 5-14V minimum 900mA,
which supplies power directly to the Base/Charger via the power
connector of the Base itself.

CAUTION

In order to avoid or minimize the potential risk of ergo­nomic injury follow the recommendations below. Consult
with your local Health & Safety Manager to ensure that
you are adhering to your company’s safety programs to
prevent employee injury.

Regulatory Information

Quick Reference Guide 11

Charger Labeling

Label is shown here to illustrate their location only. Please view
the label on your product for actual details.

Charger Label

Regulatory Information

12 Gryphon™ I GM4100

WEEE Statement

English

For information about the disposal of Waste Electrical and Electronic Equipment (WEEE),
please refer to the website at www.scanning.datalogic.com.

Italian

Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche
consultare il sito Web www.scanning.datalogic.com.

French

Pour toute information relative à l’élimination des déchets électroniques (WEEE),
veuillez consulter le site internet www.scanning.datalogic.com.

German

Informationen zur Entsorgung von Elektro- und Elektronik- Altgeräten (WEEE) erhalten
Sie auf der Webseite www.scanning.datalogic.com.

Spanish

Si desea información acerca de los procedimientos para el desecho de los residuos del
equipo eléctrico y electrónico (WEEE), visite la página Web
www.scanning.datalogic.com.

Portuguese

Para informações sobre a disposição de Sucatagem de Equipamentos Elétricos e
Eletrônicos (WEEE -Waste Electrical and Electronic Equipment), consultar o site web
www.scanning.datalogic.com.

Chinese

有关处理废弃电气电子设备 (WEEE) 的信息， 请参考 Datalogic
公司的网站： http://www.scanning.datalogic.com/。

Japanese

廃電気電子機器 (ＷＥＥＥ) の処理についての関連事項は
Datalogic のサイト www.scanning.datalogic.com をご参照下さ

い。

Waste Electrical and Electronic Equipment
(WEEE) Statement

Warranty

Quick Reference Guide 13

Warranty

Datalogic warrants to Customer that Datalogic's products will be free from defects in
materials and workmanship for a period of 3 years from product shipment. In order to
obtain service under this Warranty, Customer must notify Datalogic of the claimed
defect before the expiration of the Warranty period and obtain from Datalogic a
return authorization number for return of the product to designated Datalogic service
center. If Datalogic determines Customer’s claim is valid, Datalogic will repair or
replace product without additional charge for parts and labor. Customer shall be
responsible for packaging and shipping the product to the designated Datalogic ser­vice center, with shipping charges prepaid. Datalogic shall pay for the return of the
product to Customer if the shipment is to a location within the country in which the
Datalogic service center is located. Customer shall be responsible for paying all ship­ping charges, duties, taxes, and any other charges for products returned to any other
locations.
Warranty is subject to the limitations and exclusions set forth in the paragraphs that
follow.
WARRANTY SET FORTH ABOVE IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS.

Exclusions

Warranty coverage shall not apply to any claimed defect, failure or damage which
Datalogic determines was caused by: improper use of product; failure to provide
product maintenance, including but not limited to cleaning of the upper window in
accordance with product manual; installation or service of product by other than Dat­alogic representatives; use of product with any other instrument, equipment or appa­ratus; modification or alteration of product. External cables and replacement of upper
window/cartridge due to scratching, stains or other degradation will not be covered
under the Warranty. External power supplies returned for service must be accompa­nied by the original product for performance of service.

Limitation of Liability

Datalogic's REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCT AS SET FORTH ABOVE
IS THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY ON ACCOUNT OF CLAIMS OF
BREACH OF WARRANTY OR PRODUCT DEFECT. UNDER NO CIRCUMSTANCES WILL Dat­alogic BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR
ANY INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT DAMAGES
REGARDLESS OF WHETHER Datalogic HAD ADVANCE NOTICE OF THE POSSIBILITY OF
SUCH DAMAGES.

Assignment

Customer may not assign or otherwise transfer its rights or obligations under War­ranty except to a purchaser or transferee of product. No attempted assignment or
transfer in violation of this provision shall be valid or binding upon Datalogic.

Risk of Loss

Customer shall bear risk of loss or damage for product in transit to Datalogic. Data­logic shall assume risk of loss or damage for product in Datalogic's possession or
product being returned to Customer by Datalogic, except such loss or damage as may
be caused by the negligence of Customer, its agents or employees. In the absence of
specific written instructions for the return of product to Customer, Datalogic will
select the carrier, but Datalogic shall not thereby assume any liability in connection
with the return shipment.

Warranty

14 Gryphon™ I GM4100

NOTES

dichiara che
declares that the
déclare que le
bescheinigt, daß das Gerät
declare que el

Gryphon CHR-GM40 ; Charger Only Base

sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:

Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla
sicurezza dei prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility and
product safety.
Basée sur la législation des Etats membres relative à la compatibilté électromagnétique et à la sécurité
des produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische
Verträglichkeit und Produktsicherheit entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad
electromagnética y las Medidas de seguridad relativas al producto.

Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:

Datalogic Scanning Group Srl
Via S. Vitalino, 13
Lippo di Calderara di Reno (BO)
40012 Italy

e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos

2004/108/EC EMC Directive e emendamenti successivi

and further amendments
et ses successifs amendements
und späteren Abänderungen
y succesivas enmiendas

EN 55022 ( C

LASS A ITE ), AUGUST 1994:

A

MENDMENT A1 ( CLASS A ITE ), OCTOBER 2000:

L

IMITS AND METHODS OF MEASUREMENTS OF RADIO
DISTURBANCE CHARACTERISTICS OF INFORMATION TECHNOLOGY
EQUIPMENT

EN 55024, S

EPTEMBER 1998: INFORMATION TECHNOLOGY EQUIPMENT

I

MMUNITY CHARACTERISTICS

L

IMITS AND METHODS OF MEASUREMENT

Lippo di Calderara, May 4th , 2009 Ruggero Cacioppo

Quality Assurance Manager

09

EC-058
Rev.: 0
Pag.: 1 di 1

DECLARATION OF CONFORMITY

Australia

Datalogic Scanning Pty Ltd
Telephone: [61] (2) 9870 3200
[e-mail]

France and Benelux

Datalogic Scanning Sarl
Telephone: [33].01.64.86.71.00
[e-mail]

Germany

Datalogic Scanning GmbH
Telephone: [phone]
[e-mail]

India

Datalogic Scanning India
Telephone: 91- 22 - 64504739
[e-mail]

Italy

Datalogic Scanning SpA
Telephone: [39] (0) 39/62903.1
[e-mail]

Japan

Datalogic Scanning KK
Telephone: [phone]
[e-mail]

Latin America

Datalogic Scanning, Inc
Telephone: [phone]
[e-mail]

Singapore

Datalogic Scanning Singapore PTE LTD
Telephone: [phone]
[e-mail]

Spain and Portugal

Datalogic Scanning Sarl Sucursal en
España
Telephone: [phone]
[e-mail]

United Kingdom

Datalogic Scanning LTD
Telephone: [phone]
[e-mail]

Datalogic Scanning, Inc.

959 Terry Street
Eugene, OR 97402
USA
Telephone: [phone]
Fax: [phone]

©2009 Datalogic Scanning, Inc. R44-3021 (Rev. A) 6/09

www.scanning.datalogic.com