Datalogic Gryphon GFS41XX Quick Reference Manual

Gryphon™ GFS41XX

Fixed Mount Linear Imager

Bar Code Reader

Quick Reference Guide

Datalogic ADC, Inc.

959 Terry Street
Eugene, OR 97402
USA
Telephone: [phone]
Fax: [phone]

©2010-2014 Datalogic ADC, Inc.

An Unpublished Work - All rights reserved. No part of the contents of this doc­umentation or the procedures described therein may be reproduced or trans­mitted in any form or by any means without prior written permission of
Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic" or "Datalogic
ADC"). Owners of Datalogic products are hereby granted a non-exclusive, revo­cable license to reproduce and transmit this documentation for the pur­chaser's own internal business purposes. Purchaser shall not remove or alter
any proprietary notices, including copyright notices, contained in this docu­mentation and shall ensure that all notices appear on any reproductions of
the documentation.
Should future revisions of this manual be published, you can acquire printed
versions by contacting your Datalogic representative. Electronic versions may
either be downloadable from the Datalogic website (www.datalogic.com) or
provided on appropriate media. If you visit our website and would like to make
comments or suggestions about this or other Datalogic publications, please
let us know via the "Contact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this man­ual that is complete and accurate, however, Datalogic reserves the right to
change any specification at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A.
in many countries, including the U.S.A. and the E.U. All other brand and prod­uct names may be trademarks of their respective owners.

Patents

This product is covered by one or more of the following patents.

US Pat.: 5,311,000; 5,481,098; 5,929,421; 5,992,740; 6,098,883; 6,260,764;
6,443,360 B1; 6,808,114 B1; 6,997,385 B2; 7,075,663 B2; 7,387,246 B2.

European Pat.: 789,315 B1; 926,620 B1; 997,760 B1; 1,128,315 B1; 1,217,571 B1;
1,396,811 B1; 1,413,971 B1; 1,804,089 B1.

Chinese Pat.: CN ZL200680050007,8

Additional patents pending.

Table of Contents

Setting Up the Reader ..........................................................................................................6

Select Interface - USB Interface ....................................................................6

Mounting Bracket ........................................................................................................8

Programming ........................................................................................................................ 10

Operating Modes ...................................................................................................... 10

Exposure Modes .............................................................................................11

Technical Features ..............................................................................................................12

RS-232 Electrical Connections .................................................................. 15

LED and Beeper Indications ............................................................................................. 17

Button and LED Status ............................................................................................17

Ergonomic Recommendations .......................................................................................18

Regulatory Information ..................................................................................................... 19

Reader Labeling ................................................................................................................... 19

China RoHS Statement ................................................................................ 20

WEEE Statement .......................................................................................................21

Datalogic ADC Limited Factory Warranty ........................................................ 22

Ergonomic Recommendations .......................................................................................24

Services and Support .........................................................................................................25

NOTES

Quick Reference Guide 1

Datalogic ADC, Inc.

GRYPHON™ PRODUCT SERIES END USER LICENSE AGREEMENT

Notice to End User: The Datalogic Product you have acquired contains embedded Software,
which is integral to the product's operation. This Software is being provided to you under
license, subject to the terms and conditions of this Agreement. If you use the Datalogic Prod­uct, you will be deemed to have accepted the terms and conditions of this Agreement. If you
do not intend to be bound to the terms of this Agreement, Datalogic is not willing to license
the Software to you, you may not use the Datalogic Product or the Software, and you must
contact the party from whom you acquired the Datalogic Product for instructions.

This End User Software License Agreement ("Agreement") is a legally binding agreement governing
the licensing of the Software and Documentation by Datalogic ADC, Inc. and its Affiliates ("Data­logic") to the entity or person who has purchased or otherwise acquired a Datalogic Product ("End
User"). For purposes of this Agreement, any software that is associated with a separate end-user
license agreement is licensed to you under the terms of that license agreement. Datalogic and End
User hereby agree as follows:

1. Definitions.

1.1 "Affiliate" means a business entity currently existing or later acquired that controls, is con­trolled by, or is under common control with Datalogic S.p.A.

1.2 "Documentation" means materials such as user's guides, program reference guides, quick ref­erence guides, manuals, or similar materials associated with or related to the Datalogic Prod­uct, whether in printed, "online", or other form.

1.3 "Proprietary Information" means: (a) source code, object code, software, documentation, and
any related internal design, system design, data base design, algorithms, technology, techni­cal data or information, implementation techniques, and trade secrets related to the Soft­ware, (b) any other trade secrets marked appropriately or identified as proprietary or
confidential, and (c) any information that End User, under the circumstances, should recog­nize as confidential. Proprietary Information does not include any information that the receiv­ing party can establish was (1) in the public domain, (2) already in the receiving party's
possession or rightfully known prior to receipt, (3) rightfully learned from a third party not in
violation of any other's proprietary rights, or (4) independently developed without access to
Proprietary Information.

1.4 "Datalogic Product" means the Datalogic® Gryphon™ series scanner product, including all
embedded Software in and all Documentation related to such product, which has been pur­chased or otherwise acquired by End User, whether obtained directly or indirectly from Data­logic.

1.5 "Software" means any software or computer programs of Datalogic or its third party licensors
in machine readable form which is embedded in the Datalogic Product, whether obtained
directly or indirectly from Datalogic, including any replacement, update, upgrade, enhance­ment or modification.

2. Scope Of License Granted.

2.1 Datalogic grants to End User a non-exclusive, non-transferable, perpetual license to use the
Software, solely on the Datalogic Product in which it is embedded ("designated Datalogic
Product"), in machine-readable form only, solely for End User's internal business purposes.
This Agreement does not convey ownership of the Software to End User. Title to the Software
shall be and remain with Datalogic or the third party from whom Datalogic has obtained a
licensed right. As used in this Agreement, the term "purchase" or its equivalents when
applied to the Software shall mean "acquire under license." End User is not entitled to receipt
or use of the source code to any Software.

2.2 End User shall not copy, modify, decompile, disassemble, reverse engineer, or otherwise
reproduce or remanufacture the Software, whether modified or unmodified, nor sell, assign,
sublicense, distribute, lend, rent, give, or otherwise transfer the Software to any other person
or organization, for purposes other than as expressly provided in this Agreement, without

2Gryphon™ GFS4XXX

Datalogic's prior written consent.

3. Transfers, Support.

3.1 Any copying, installing, reproduction, remanufacture, reverse engineering, electronic transfer,
or other use of the Software on other than the designated Datalogic Product will be a material
breach of this Agreement. However, Datalogic may elect not to terminate this Agreement or
the granted licenses, but instead may elect to notify End User that End User is deemed to have
ordered and accepted a license for each breaching use. End User shall pay Datalogic the appli­cable list price for such licenses as of the date of such breach.

3.2 End User shall not sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the
Datalogic Product to any third party unless such third party agrees with Datalogic in writing to
be bound by the terms and conditions of this Agreement. Any such transfer of the Datalogic
Product absent such agreement shall be null and void.

3.3 End User may obtain support for Software from Datalogic at Datalogic's standard support fees
and under Datalogic's standard support terms and conditions in effect at the time the support
is requested.

4. Intellectual Property.

End User acknowledges that the Software constitutes valuable trade secrets of Datalogic or Datalogic's
third party licensors and that the Software is protected by intellectual property laws and treaties. The
license set forth in this Agreement does not transfer to End User any ownership of Datalogic's or its third
party licensors' copyrights, patents, trademarks, service marks, trade secrets, or other intellectual prop­erty rights and End User shall have no right to commence any legal actions to obtain such rights. End
User shall not remove, modify, or take any other action that would obscure any copyright, trademark,
patent marking, or other intellectual property notices contained in or on the Datalogic Product.

5. Proprietary Information.

5.1 End User acknowledges that Proprietary Information is the confidential, proprietary, and trade
secret property of Datalogic and Datalogic's third party licensors and End User acquires no
right or interest in any Proprietary Information.

5.2 End User shall not disclose, provide, or otherwise make available the Proprietary Information of
Datalogic or its third party licensors to any person other than End User's authorized employees
or agents who are under confidentiality agreement, and End User shall not use the Proprietary
Information other than in conjunction with use of the Datalogic Product exclusively for End
User's internal business purposes. End User shall take steps to protect the Proprietary Informa­tion no less securely than if it were End User's own intellectual property.

5.3 The provisions of this Proprietary Information Section shall survive and continue for five (5)
years after the termination of this Agreement.

6. Limited Warranty.

6.1 Datalogic warrants that, under normal use and operation, the Datalogic Product will conform
substantially to the applicable Documentation for the period specified in the Documentation.
During this period, for all reproducible nonconformities for which Datalogic has been given
written notice, Datalogic will use commercially reasonable efforts to remedy nonconformities
verified by Datalogic. End User agrees to supply Datalogic with all reasonably requested infor­mation and assistance necessary to help Datalogic in remedying such nonconformities. For all
defects reported to Datalogic within the warranty period, Datalogic's liability is limited to pro­viding End User with one copy of corrections or responding to End User's problem reports
according to Datalogic's standard assistance practices. Datalogic does not warrant that the
product will meet End User's requirements or that use of the product will be uninterrupted or
error free, or that Datalogic's remedial efforts will correct any nonconformance. This limited
warranty does not cover any product that have been subjected to damage or abuse, whether
intentionally, accidentally, or by neglect, or to unauthorized repair or unauthorized installation,
and shall be void if End User modifies the product, uses the product in any manner other than
as established in the Documentation, or if End User breaches any of the provisions of this

Quick Reference Guide 3

Agreement.

6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS PROVIDED "AS IS"
AND DATALOGIC MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, WRITTEN OR
ORAL, WITH RESPECT TO THE PRODUCT, AND SPECIFICALLY DISCLAIMS THE IMPLIED WAR­RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

7. Infringement.

7.1 Datalogic will defend End User against any claim in a lawsuit that the Datalogic Product fur­nished hereunder infringe a United States patent or copyright of a third party and Datalogic
will pay any damages finally awarded against End User by a court of competent jurisdiction
that are attributable to such claim or will pay End User's part of any settlement that is attribut­able to such claim, provided, that 1) End User notifies Datalogic promptly in writing of the
claim, 2) Datalogic controls the defense or settlement of the claim, and 3) End User cooper­ates fully with Datalogic in such defense or settlement. All notices of a claim should be sent to
Datalogic ADC, Inc., Legal Department, 959 Terry Street, Eugene, OR 97402.

7.2 In the defense or settlement of any such claim, Datalogic may, at its option, 1) procure for End
User the right to continue using the Datalogic Product, 2) modify the Datalogic Product so
that it becomes non-infringing, 3) replace the Datalogic Product with an equivalent product
not subject to such claim, or 4) provide End User an opportunity to return the Datalogic Prod­uct and receive a refund of the purchase price paid, less a reasonable allowance for use.

7.3 Datalogic shall have no liability to End User for claims of infringement based upon 1) the use
of any Datalogic Product in combination with any product which Datalogic has not either fur­nished or authorized for use with such Datalogic Product 2) the use of any Datalogic Product
designed, manufactured, or modified to the specifications of End User, or 3) End User's modi­fication of the Datalogic Product without written authorization from Datalogic.

7.4 THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE OBLIGATION CONCERNING
CLAIMS OF PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY INFRINGEMENT, CAN­CELS AND SUPERCEDES ANY PRIOR AGREEMENTS, WHETHER ORAL OR WRITTEN, BETWEEN
THE PARTIES CONCERNING SUCH CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY
PAST, CONTEMPORANEOUS, OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE PARTIES,
WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A FUTURE WRITING SIGNED BY BOTH
PA R TI E S .

8. Limitation Of Liability.

EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE FOR ANY CLAIMS AGAINST END
USER BY ANY OTHER PARTY. IN NO EVENT SHALL DATALOGIC'S LIABILITY FOR DAMAGES, IF ANY,
WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, STRICT LIA­BILITY, WARRANTY, OR ANY OTHER BASIS, EXCEED THE PRICE OR FEE PAID BY END USER FOR THE DATA­LOGIC PRODUCT. UNDER NO CIRCUMSTANCES SHALL DATALOGIC BE LIABLE TO END USER OR ANY
THIRD PARTY FOR LOST PROFITS, LOST DATA, INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY
OTHER SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL, PUNITIVE, EXEMPLARY, OR
OTHER SIMILAR DAMAGES, EVEN IF DATALOGIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAM­AGES.

9. Government Restricted Rights; International Use.

9.1 Use, duplication, or disclosure of the Software by the U.S. Government is subject to the
restrictions for computer software developed at private expense as set forth in the U.S. Fed­eral Acquisition Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in Technical
Data and Computer Software clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable.

9.2 If End User is using the Datalogic Product outside of the United States, End User must comply
with the applicable local laws of the country in which the Datalogic Product is used, with U.S.
export control laws, and with the English language version of this Agreement. The provisions
of the "United Nations Convention on International Sale of Goods" shall not apply to this
Agreement.

4Gryphon™ GFS4XXX

10. Termination.

10.1 Either party may terminate this Agreement or any license granted under this Agreement at any
time upon written notice if the other party breaches any provision of this Agreement.

10.2 Upon termination of this Agreement, End User immediately shall cease using any nonembed­ded software and shall return to Datalogic or destroy all non-embedded software covered by
this Agreement, and shall furnish Datalogic with a certificate of compliance with this provision
signed by an officer or authorized representative of End User. For embedded software, End
User agrees to sign a waiver prepared by Datalogic concerning further use of the embedded
Software. End User's resumed or continued use of the embedded Software after termination
shall constitute End User's agreement to be bound by the terms and conditions of this Agree­ment for such use.

11. General Provisions.

11.1 Entire Agreement; Amendment. This document contains the entire agreement between the
parties relating to the licensing of the Software and supersedes all prior or contemporaneous
agreements, written or oral, between the parties concerning the licensing of the Software. This
Agreement may not be changed, amended, or modified except by written document signed
by Datalogic.

11.2 Notice. All notices required or authorized under this Agreement shall be given in writing, and
shall be effective when received, with evidence of receipt. Notices to Datalogic shall be sent to
the attention of Contract Administration, Datalogic ADC, Inc., 959 Terry Street, Eugene, OR
97402, or such other address as may be specified by Datalogic in writing.

11.3 Waiver. A party's failure to enforce any of the terms and conditions of this Agreement shall not
prevent the party's later enforcement of such terms and conditions.

11.4 Governing Law; Venue: This Agreement and the rights of the parties hereunder shall be gov­erned by and construed in accordance with the laws of the State of Oregon U.S.A, without
regard to the rules governing conflicts of law. The state or federal courts of the State of Oregon
located in either Multnomah or Lane counties shall have exclusive jurisdiction over all matters
regarding this Agreement, except that Datalogic shall have the right, at its absolute discretion,
to initiate proceedings in the courts of any other state, country, or territory in which End User
resides, or in which any of End User's assets are located.

11.5 Attorneys' Fees. In the event an action is brought to enforce the terms and conditions of this
Agreement, the prevailing party shall be entitled to reasonable attorneys' fees, both at trial and
on appeal.

- END -

Software Product Policy

Datalogic reserves the right to ship its products with the latest version of software/firmware available.
This provides our customers with the very latest in Datalogic software technology.

The only exception to this policy is when the buyer has a signed contract with Datalogic that clearly
defines the terms and conditions for making software/firmware changes in products shipped to the
buyer.

Customers Under Software Support

Customers that elect to subscribe to Datalogic Software Maintenance and Support Agreement will
receive 30 days advance notification of: (1) the release of a new software version; and/or (2) discontinua­tion of any prior software version that will no longer be supported. Datalogic will provide maintenance
for a fee that will assist customers in transitioning to the next software version. If a customer is currently
using the software version being discontinued, the customer may elect to transition to any one of the
newer versions, depending on the hardware in use.

To arrange for a Software Maintenance and Support Agreement please contact your Datalogic sales per­son.

Quick Reference Guide 5

Gryphon GFS4XXX

Fixed Mount Linear Imager

Bar Code Reader

The Gryphon GFS4XXX is a fully self-contained standard range 1D bar
code scanning module for use in self service kiosks or other semi auto­mated equipment requiring the ability to read a bar code. It is intended
to be an easy integration by system designers with little expertise in scan­ning technology. Unlike currently available products, the GFS4XXX
uses the latest and fastest imaging technology and offers Datalogic’s
Green Spot for targeting and good read feedback.

The scanning technology is essentially the same as the Gryphon I 4100
family of linear imagers, with some adjustments made for read range and
improved motion tolerance. The enclosure is designed for ease of integra­tion, is sealed to IP54 for cleaning, and is constructed of a solvent- and
disinfectant-tolerant resin for health care applications.

The GFS4XXX is a linear CCD Scanner for OEM applications. It is
available in two different models:

• GFS4170 Gryphon Fixed Scanner imager USB

• GFS4150-9 Gryphon Fixed Scanner imager RS-232 9 pin con­nector

Setting Up the Reader

6Gryphon™ GFS4XXX

Setting Up the Reader

Select Interface - USB Interface

The reader (GFS4170 model only) attaches directly to a USB host or a
powered USB hub, and is powered by it. No additional power supply is
required. The reader auto-detects the USB and defaults to the HID key­board interface.

To simulate a Keyboard, scan the bar code below:

Interface Selection: USB-KBD (GFS4170 model only )

To simulate an RS-232 Standard Interface scan the bar code below:

Interface Selection: USB-COM (GFS4170 Model only)

IMPORTANT

Download the correct USB COM driver from:
http://www.datalogic.com.

Setting Up the Reader

Quick Reference Guide 7

Select USB Keyboard with alternate key encoding:

USB Alternate Keyboard

Select USB Keyboard for Apple computers:

USB-KBD-APPLE

Select RS-232 Wincor-Nixdorf:

RS-232 Wincor-Nixdorf

Setting Up the Reader

8Gryphon™ GFS4XXX

Mounting Bracket

The GFS4XXX can be mounted to a stationary surface using a bracket as
shown below. Just attach to the bottom of the reader using screws, as
shown in the next two figures.

Figure 1. Mounting the bracket

Setting Up the Reader

Quick Reference Guide 9

Figure 2. Bracket Attached

Programming

10 Gryphon™ GFS4XXX

Programming

For your convenience, this guide includes the programming bar codes re­quired to configure the reader.

If you aren't sure what programming options are in your reader, or you've
changed some options and want the factory settings restored, scan the bar
code below:

Restore Default Settings

Operating Modes

The reader can operate in one of several scanning modes:

On Line —

Scanning is activated when the button is pushed or through an

external trigger (GFS4150-9 only).

Automatic —

Scanning is continually on.

Automatic (Object Sense) —

Scanning is turned on automatically when an

item is placed in reader’s field of view.

Strobe Exposure Mode —

For any selectable scanning mode, performance
on moving bar codes can be improved by flashing the scanner's lighting
(strobe mode). The scanner strobes at a very high frequency, so the change
in lighting may not be apparent. When enabled, the scanner can read
codes moving at up to 1m/sec, depending on the bar size and direction the
code is moving.

Programming

Quick Reference Guide 11

Operating Modes (continued)

Operating Mode = On Line

Operating Mode = Automatic

Operating Mode = Automatic (Object Sense)

Exposure Modes

Continuous

Strobed







Technical Features

12 Gryphon™ GFS4XXX

Technical Features

Item Description

Physical Characteristics

Co

lor Grey

Dimensions

Height 1.54" / 39mm
L

ength 2.24" / 57mm

Width 2.28" / 58 mm

Weight (without brackets)

USB model - Approx. 5.0 ounces/140 g
RS-2

32 model - approx. 6.0 ounces/170 g

Electrical Characteristics

In

put Voltage 5 VDC ± 5%

External Trigger Input (Only GFS4150-9)

Voltage
Cu

rrent Consumption

Minimum Pulse Duration

5 ÷ 30 VDC
10 mA max
5 ms

Output (Only GFS4150-9)

Vce
C

ollector Current
Vce Saturation
Power Dissipation

30 Vdc max
40 mA continuous max.
1V max at 10 mA
80 mW max at 50 °C (ambient temperature)

Current & Power
Co

nsumption

Input current at 5V = 390 mA (max)
<2.5 mA (GFS4170 model in USB suspend)

Technical Features

Quick Reference Guide 13

Performance Characteristics

Scan rate 320 scans/s (max)

Light Source Dual LEDs (Red Light, =620 nm)

Roll Angle Tolerance ± 35°

Pitch Angle Tolerance ± 65° (Avoid zero angle, ± 6°)

Skew Angle Tolerance ± 65°

Depth of Field (Typical)

5 mil - 2" to 6.3" (5cm to 16cm)
8

mil - 1.2" to 10.6" (3cm to 27cm)
13 mil* - 1.2" to 15.7" (3cm to 40 cm)
20 mil - up to 23.6" (up to 60 cm)

Minimum Element Width 3 mil

Print Contrast Minimum 15% minimum reflectance

Decode Capability

UPC/EAN/JAN A, E, 13, 8 (including P2 /P5, ISBN / Bookland
&

ISSN); Code 39 (including full ASCII); Code 39 CIP (French
Pharmaceutical); Code 128; I 2 of 5; Standard 2 of 5; China
Post Code (DLS 2 of 5); IATA Industrial 2 of 5 Air Cargo Code;
Codabar; ABC Codabar; GS1 - 128; Code ISBT 128; MSI;
Plessey; DATABAR-14; DATABAR Limited; DATABAR-14
Stacked; DATABAR Expanded Stacked; Code32 (Italian
Pharmacode); China Post (DLS 2 of 5).

Interfaces Supported

GFS4150-9 model: RS-232 Standard
GFS4170 model:USB COM Standard, USB Keyboard

Item Description

Technical Features

14 Gryphon™ GFS4XXX

* (13 mils DOF based on EAN. All others are Code 39. All labels grade A, minimum illumination 100 lux,
20°C, label inclination 10°, static reading).

User Environment

Operative Temperature 32° to 122° F (0° to 50° C)

Storage Temperature -13° to 158° F (-25° to 70° C)

Humidity Operating: 5% to 90% relative humidity, non condensing

Drop specifications 5 drops from 30 inches (0.76 mt.) to concrete

Ambient Light immunity Up to 100,000 Lux

Contaminants IP54

ESD Level 16 KV

Regulatory

LED Emission Class

(

IEC-62471:2006-07) Exempt (No Risk)

IEC 60825-1:1993 + A1:1997 + A2:2001

Electrical Safety IEC 60950-1 , CAN/CSA-C22.2 No. 60950-1-03; UL 60950-1

EMI/RFI

North America (FCC) : Part 15 Class B, Canada ( IC) :
ICES-003 Class B, European Union EMC Directive, Australian
(C-tick), Russia (Gost)

Item Description

Technical Features

Quick Reference Guide 15

RS-232 Electrical Connections

Default configuration RS-232: 9600, 8, N, 1, no handshaking,
ACK/NAK disabled.

Figure 3. Output Connection

9-pin connector

1 Trigger Trigger signal input (see Figure 4 and Figure 5 on next page)
2 TX Transmit Data
3RX Receive Data
4 NC Not connected
5 GND Ground
6VCC +5Vdc
7CTS Clear To Send
8RTS Request To Send
9OUT Output signal (see

Figure 3)

OUT

9

30Vdc max

GND

5

Vext

USER INTERFACE

GFS4150-9

Technical Features

16 Gryphon™ GFS4XXX

Figure 4. Using GFS4150-9 Power

Figure 5. Using External Power Supply

TRIGGER

1

GFS4150-9

GND

6

5

VCC

TRIGGER

1

GFS4150-9

30Vdc
max

Vext

GND

5

LED and Beeper Indications

Quick Reference Guide 17

LED and Beeper Indications

Button and LED Status

The top of the product has a button and three indicator LEDs:

POWER
(yellow LED)

ON = Power ON

OFF = Power OFF or standby (only
USB model)

GOOD
(green LED)

ON = Good Read

Blinks = USB enumeration or inter­face inactive or waiting for change
of configuration

TRIGGER
(blue LED)

ON = external trigger or button
pressed or phase active

Button Press for manual trigger

Ergonomic Recommendations

18 Gryphon™ GFS4XXX

Ergonomic Recommendations

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

CAUTION

In order to avoid or minimize the potential risk of ergonomic
injury follow the recommendations below. Consult with your
local Health & Safety Manager to ensure that you are adhering to
your company’s safety programs to prevent employee injury.

Regulatory Information

Quick Reference Guide 19

Regulatory Information

All models are designed to be compliant with rules and regulations in lo­cations they are sold and will be labeled as required.

Any changes or modifications to equipment not expressly approved by
Datalogic could void the user's authority to operate the equipment.

Reader Labeling

Sample labels are shown for illustrative purposes only. Please view the la­bels on your product for actual details, as they may vary.

.

Scanner Label

Reader Labeling

20 Gryphon™ GFS4XXX

China RoHS Statement

China RoHS

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

Chromium

(Cr(VI))

Polybrominated

biphenyls

(PBB)

Polybrominated

diphenyl ethers

(PBDE)

᦭Ქ᦭ኂ‛凝ᚗర⚛

PART

ㇱઙฬ⒓

卋

ᳮ

叏

౐ચ卲 ᄙᄽ侶૖ ᄙᄽԲ૖ㅘ

Printed Circuit Board Assembly

⬉䏃ᵓ㒘ӊ

X O O O O O

Assy, Optics Block

ܝᄺ㒘ӊ

X O O O O O

Assy, Module

ܝᄺ㒘ӊ

X O O O O O

Oઍ⴫ᱝẊㇱઙ⊛ᚲ᦭ဋ凝ޗறխࢬܶ具Ẋڶڶ୭凝݁܅Պխ䦀Գا٥ࡉ㧺ஒ䣈䢓ຝᚲ咒ؒ⊛

ޝ䶣՗ஒ䣈঴խڶڶ୭凝ૻၦ૞ޣρ(SJ/T 11363-2006) 億ࡳૻၦޕ

X:ઍ⴫ᱝẊㇱઙᚲ↪⊛ဋ凝ޗறխ, ⥋ዋ᦭৻㮕᧚ᢱ౔ᚲ฽⊛᦭Ქ᦭ኂ‛凝೏Պխ䦀Գا٥ࡉ㧺ஒ䣈䢓ຝᚲ咒ؒ⊛

ޝ䶣՗ஒ䣈঴խڶڶ୭凝ૻၦ૞ޣρ(SJ/T 11363-2006) 億ࡳૻ㊂

0

RoHS TABLE,CHINA REV. C

850000870

Reader Labeling

Quick Reference Guide 21

WEEE Statement

English

For information about the disposal of Waste Electrical and Electronic Equipment (WEEE), please refer to
the website at www.datalogic.com.

Italian

Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche consultare il sito
Web www.datalogic.com.

French

Pour toute information relative à l’élimination des déchets électroniques (WEEE), veuillez consulter le
site internet www.datalogic.com.

German

Informationen zur Entsorgung von Elektro- und Elektronik- Altgeräten (WEEE) erhalten Sie auf der
Webseite www.datalogic.com.

Spanish

Si desea información acerca de los procedimientos para el desecho de los residuos del equipo eléctrico
y electrónico (WEEE), visite la página Web www.datalogic.com.

Portuguese

Para informações sobre a disposição de Sucatagem de Equipamentos Elétricos e Eletrônicos (WEEE

-Waste Electrical and Electronic Equipment), consultar o site web www.datalogic.com.

Chinese

有关处理废弃电气电子设备 (WEEE) 的信息， 请参考 Datalogic 公
司的网站

www.datalogic.com/。

Japanese

廃電気電子機器 (ＷＥＥＥ) の処理についての関連事項は Datalogic の
サイト www.datalogic.com をご参照下さい。

Reader Labeling

22 Gryphon™ GFS4XXX

Datalogic ADC Limited Factory Warranty

Warranty Coverage

Datalogic warrants to Customer that Datalogic's products will be free from defects in
materials and workmanship for a period of one (1) year from product shipment. Dat­alogic ADC (“Datalogic”) hardware products are warranted against defects in material
and workmanship under normal and proper use. The liability of Datalogic under this
warranty is limited to furnishing the labor and parts necessary to remedy any defect
covered by this warranty and restore the product to its normal operating condition.
Repair or replacement of product during the warranty does not extend the original
warranty term. Products are sold on the basis of specifications applicable at the time
of manufacture and Datalogic has no obligation to modify or update products once
sold.

If Datalogic determines that a product has defects in material or workmanship, Data­logic shall, at its sole option repair or replace the product without additional charge
for parts and labor, or credit or refund the defective products duly returned to Data­logic. To perform repairs, Datalogic may use new or reconditioned parts, components,
subassemblies or products that have been tested as meeting applicable specifications
for equivalent new material and products. Customer will allow Datalogic to scrap all
parts removed from the repaired product. The warranty period shall extend from the
date of shipment from Datalogic for the duration published by Datalogic for the prod­uct at the time of purchase (Warranty period). Datalogic warrants repaired hardware
devices against defects in workmanship and materials on the repaired assembly for a
90 day period starting from the date of shipment of the repaired product from Data­logic or until the expiration of the original warranty period, whichever is longer. Dat­alogic does not guarantee, and it is not responsible for, the maintenance of, damage
to, or loss of configurations, data, and applications on the repaired units and at its sole
discretion can return the units in the “factory default” configuration or with any soft­ware or firmware update available at the time of the repair (other than the firmware
or software installed during the manufacture of the product). Customer accepts re­sponsibility to maintain a back up copy of its software and data.

Warranty Claims Process

In order to obtain service under the Factory Warranty, Customer must notify Datalogic
of the claimed defect before the expiration of the applicable Warranty period and ob­tain from Datalogic a return authorization number (RMA) for return of the product to
a designated Datalogic service center. If Datalogic determines Customer’s claim is val­id, Datalogic will repair or replace product without additional charge for parts and la­bor. Customer shall be responsible for packaging and shipping the product to the
designated Datalogic service center, with shipping charges prepaid. Datalogic shall
pay for the return of the product to Customer if the shipment is to a location within

Reader Labeling

Quick Reference Guide 23

the country in which the Datalogic service center is located. Customer shall be re­sponsible for paying all shipping charges, duties, taxes, and any other charges for
products returned to any other locations. Failure to follow the applicable RMA pol­icy, may result in a processing fee. Customer shall be responsible for return shipment
expenses for products which Datalogic, at its sole discretion, determines are not de­fective or eligible for warranty repair.

Warranty Exclusions

The Datalogic Factory Warranty shall not apply to:

(i) any product which has been damaged, modified, altered, repaired or

upgraded by other than Datalogic service personnel or its authorized rep­resentatives;

(ii) any claimed defect, failure or damage which Datalogic determines was

caused by faulty operations, improper use, abuse, misuse, wear and tear,
negligence, improper storage or use of parts or accessories not approved or
supplied by Datalogic;

(iii) any claimed defect or damage caused by the use of product with any other

instrument, equipment or apparatus;

(iv) any claimed defect or damage caused by the failure to provide proper

maintenance, including but not limited to cleaning the upper window in
accordance with product manual;

(v) any defect or damage caused by natural or man-made disaster such as but

not limited to fire, water damage, floods, other natural disasters, vandalism
or abusive events that would cause internal and external component dam­age or destruction of the whole unit, consumable items;

(vi) any damage or malfunctioning caused by non-restoring action as for exam-

ple firmware or software upgrades, software or hardware reconfigurations
etc.;

(vii) the replacement of upper window/cartridge due to scratching, stains or

other degradation and/or

(viii) any consumable or equivalent (e.g., cables, power supply, batteries, key-

pads, touch screen, triggers etc.).

No Assignment

Customer may not assign or otherwise transfer its rights or obligations under this
warranty except to a purchaser or transferee of product. No attempted assignment
or transfer in violation of this provision shall be valid or binding upon Datalogic.

DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT
LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PAR-

Ergonomic Recommendations

24 Gryphon™ GFS4XXX

TICULAR PURPOSE, OR NONINFRINGEMENT. DATALOGIC SHALL NOT BE LIABLE FOR
ANY DAMAGES SUSTAINED BY CUSTOMER ARISING FROM DELAYS IN THE REPLACE­MENT OR REPAIR OF PRODUCTS UNDER THE ABOVE. THE REMEDY SET FORTH IN THIS
WARRANTY STATEMENT IS THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY FOR
WARRANTY CLAIMS. UNDER NO CIRCUMSTANCES WILL DATALOGIC BE LIABLE TO
CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY INCIDENTAL, CON­SEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT DAMAGES REGARDLESS OF
WHETHER DATALOGIC HAD ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAG­ES.

Risk of Loss

Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalog­ic shall assume risk of loss or damage for product in Datalogic’s possession. In the ab­sence of specific written instructions for the return of product to Customer, Datalogic
will select the carrier, but Datalogic shall not thereby assume any liability in connec­tion with the return shipment.

Ergonomic Recommendations

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

CAUTION

In order to avoid or minimize the potential risk of ergo­nomic injury follow the recommendations below. Con­sult with your local Health & Safety Manager to ensure
that you are adhering to your company’s safety pro­grams to prevent employee injury.

Services and Support

Quick Reference Guide 25

Services and Support

Datalogic provides several services as well as technical support through its website.
Log on to

www.datalogic.com

and click on the links indicated for further infor-

mation.

Products

Search through the links to arrive at your product page where you can download
specific

Manuals

and

Software & Utilities

, including:

•

Datalogic Aladdin™

, a multi-platform utility program that allows device
configuration using a PC. It provides RS-232 interface configuration as
well as configuration bar code printing.

Service & Support

•

Technical Support

- Product documentation and programming guides

and Technical Support Department in the world

•

Service Programs

- Warranty Extensions and Maintenance Agreements

•

Repair Services

- Flat Rate Repairs and Return Material Authorization

(RMA) Repairs

•

Downloads

– Manuals & Documentation, Data Sheets, Product Cata-

logs, etc.

Contact Us

• Information Request Form and Sales & Service Network.

Services and Support

26 Gryphon™ GFS4XXX

NOTES

DECLARATION OF CONFORMITY

La presente dichiarazione di conformità è rilasciata sotto la responsabilità esclusiva di Datalogic ADC Srl per:
This Declaration of Conformity is issued under the sole responsibility of Datalogic ADC Srl for:
Cette déclaration de conformité est établie sous la seule responsabilité de Datalogic Srl pour:
Diese Konformitätserklärung wird unter der alleinigen Verantwortung des Datalogic ADC Srl erteilt für:
Esta declaración de conformidad se expide bajo la exclusiva responsabilidad de Datalogic ADC Srl para:

GFS41xx

sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:

2004/108/EC EMC Directive

2011/65/EC RoHS Directive

Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla sicurezza
dei prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility and product
safety.
Basée sur la législation des Etats membres relative à la compatibilté électromagnétique et à la sécurité des
produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische
Verträglichkeit und Produktsicherheit entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad
electromagnética y las Medidas de seguridad relativas al producto.

Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:

Datalogic ADC Srl, Via S. Vitalino, 13

Lippo di Calderara di Reno (BO) 40012 Italy

EC-064
Rev.: 3
Pag.: 1 di 1

e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos

EN 55022 (CLASS A ITE ), SEP­TEMBER 2006 + A1, 2007:

L

IMITS AND METHODS OF MEASUREMENTS OF RADIO DISTURBANCE

C

HARACTERISTICS OF INFORMATION TECHNOLOGY EQUIPMENT

EN 61000-6-2, AUGUST 2005:

E

LECTROMAGNETIC COMPATIBILITY

(EMC)

P

ART

6-2: G

ENERIC STANDARDS

- I

MMUNITY FOR INDUSTRIAL ENVIRONMENTS

EN 50581, S

EPTEMBER

2012:

T

ECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS

W

ITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES

Lippo di Calderara,
March29th , 2013

Ruggero Cacioppo

Quality & Reliability MGR - Europe

13

www.datalogic.com

©2010-2014 Datalogic ADC, Inc. • All rights reserved.
Datalogic and the Datalogic logo are registered trademarks of Datalogic
S.p.A. in many countries, including the U.S.A. and the E.U.

Datalogic ADC, Inc.

959 Terry Street | Eugene |OR 97402 | USA
Telephone: [phone]

|

Fax: [phone]

820044914 (Rev E)

June 2014