Datajack sierra 597 User Manual

1

Package Contents

· USB Modem 597 Device

· Quick Start Guide

· Carrying pouch

Easy Installation

You do not need an installation CD to install the drivers and

software for this device. The necessary drivers and software are

automatically installed when you insert the USB Modem into your

Windows or Mac computer.

USB Modem 597 Basics

The DataJack USB Modem 597 is a dual-band wireless device. It enhances the functionality of your mobile
computing devices by adding wireless connectivity to the internet. The DataJack Mobile Broadband USB
Modem fits into a USB slot (available on most notebook and desktop computers).

Getting More Information About the USB Modem and Service

This guide describes how to install and start the software. If you experience an issue with the USB Modem or
the DataJack service, please contact DataJack Customer Service.

By using DataJack’s wireless internet service, you agree to comply with the Terms of Service. You are encouraged to review these
terms on our website at www.datajack.com/terms.

2

USB Modem 597 Overview

· Service Indicator LED — Provides information about your mobile broadband connection.

· Power Indicator LED — Indicates if the device is powered on or off.

· microSD Slot — Enables you to store data on a microSD card (sold separately) inserted into the device.

· Expansion Slot — Enables you to attach an external antenna (sold separately).

· Protective Cap — Protects the USB connector when not in use.

3

NOTE

Do not insert the USB Modem into a USB hub or a USB slot on a keyboard.

NOTE

The USB Modem will not work with handhelds or Pocket PCs.

NOTE

As part of the installation process you may be prompted to restart your computer; save any open documents.

Installing the Software and Drivers

The installation process has two stages:

† Installing the Software and Drivers — Insert the USB Modem to install the drivers and the software

(for Windows, see below; for Mac, see page 6).

† Activating Your USB Modem — Start the software, and activate your account and configure the USB

Modem to use your account.

Installation on a Windows Computer

System Requirements

The DataJack Mobile Broadband USB Modem is supported on:

† Windows 7.
† Windows Vista.
† Windows XP with Service Pack 2 or later.

To install and run the USB Modem and accompanying SmartView software on a Windows computer, you will
need one USB slot.

Installing the Software and Drivers

1. If your USB Modem has not yet been activated, ensure you are in the network coverage area.

4