Data Display Group SNB 46 Lavinia, SNB 55 Lavinia User Manual

USER MANUAL

Super Narrow Bezel Monitors 46“/ 55“ LAV

SNB Monitor (46“/ 55“)

with VGA, HDMI, DVI, RS 232

201505_manual_SNB_LAV_EN

DATA DISPLAY GROUP

2

Copyright

The contents of this manual are subject to change without notice.

© 2015 Data Display Group. All rights reserved.

Reproduction of this manual in parts or entirely without the previous authorization of Data Display Group is prohibited.

Data Display Group is not liable for errors and collateral or subsequent damage which result from supply, deployment or any other utilisation of this document.

All product names mentioned in this document are trademarks or registered trademarks of their due owners.

3

Table of Content

1. GeneralSpecications ............................................................................... 4

2. Scope of Delivery .......................................................................................5

3. General Safety Regulations .......................................................................6

4. First Installation .......................................................................................... 9

5. Super Narrow Bezel Video Lavinia ........................................................... 12

6. Maintenance ............................................................................................28

7. Guarantee / Service .................................................................................28

8. Disposal .................................................................................................... 30

9. Declaration of Conformity ........................................................................ 31

General Specications

4

1. General Specications

Scope of Document

This user manual is valid for Super Narrow Bezel 46“ and 55“ monitors. Article numbers: DS-91-235; DS-91-303

Important note: This user manual is complemented by other additional documents when indicated.

All documents are also available for download from Data Display Group web site: www.datadisplay-group.com.

Monitor versions:

SNB 46“/ 55“ Lavinia: Monitor with integrated AD converter board, 1 x VGA, 1 x HDMI, 1 x DVI, 1 x RS232.

Scope of Delivery

5

2. Scope of Delivery

When unpacking the monitor, please check if the following accessories are included in the shipment:

Note: Pictures can differ from actually supplied products.

Product information* Accompanying DVD* DVI cable* Power cable*

(Manuals, Datasheets,

Driver, Drawings)

RS232 modem cable* Remote control incl. Batteries per video wall*

* The representation is a representation only.

DATA DISPLAY GROUP

General Safety Regulations

6

3. General Safety Regulations

Safety information

Please read this safety information carefully for your personal safety and for the prevention of property damage.

In case of a malfunction immediately disconnect the power plug and contact your dealer or the next Data Display Group service center.
A malfunction is also considered if the housing, a control element or cable is damaged or if liquids or other objects penetrate the
monitor.

Please read the safety information carefully before intalling devices. If you have any doubts about whether the device may be used in
a particular environment, please contact our service partner.

Repairs

Repairs may only be carried out by authorized technical personnel. Unauthorized access or improper repairs might cause serious prop­erty damage or cause danger to the user. In addition to that, any legitimate warranty claim expires.

Electrical connection

Disconnect the monitor from mains before carrying out any work. Do not touch or connect data cables or power cables during thunder­storms.

System start-up

Before system start-up slowly adjust the monitor temperature to the ambient temperature. Do not expose device to direct heat ra­diation. In case of condensation, please wait minimum 12 hours before setting the monitor into operation. The monitor may only be

installed and operated as described in this documentation or the corresponding data sheets. Only qualied personnel may carry out

the initial installation and system start -up.

Qualied personnel

Qualied personnel, in terms of the safety information of this documentation, are persons who are qualied to activate, ground and

label devices, systems and circuits according to the safety standards.

Operation

For a trouble-free and safe operation of the product, adequate transportation, storage, installation and assembly as well as careful

handling and maintenance are essential. The device is only certied for in-door operation. Avoid extreme ambient conditions. Protect

the monitor from dust, humidity and heat. Do not expose the monitor to direct sunlight.

Transport

Unpack the monitor at place of installation. Use only original packaging for transportation. Please observe these rules for any later
transport.

Condensation

Avoid condensation during transport at low temperatures or at extreme uctuations of temperature.

General Safety Regulations

7

• Do not put objects onto the device.

• Do not place candles, heaters or humidier near the device.

• Keep the device away from replaces and ammable materials.

• According to size, devices may be difcult to handle and very heavy. Ensure that at least
two people lift and carry the device.

• Put down the device slowly and carefully to avoid damaging the LCD screen. Ensure that
the device stands stable.

• Keep packaging away from children. Danger of suffocation!

• Use our specied and professionally mounted wall mounting only.

• Do not use multiple sockets to plug several devices into a single socket.

• Do not use damaged or loose sockets to plug in the device.

• Plug the device in earthed sockets only.

• Operate the device with our power cables included in the delivery only.

• Use undamaged power cables only.

• When plugging in and out, do not touch the power cable with wet hands.

• Ensure that the power cable is plugged in the socket safely and correctly.

Safety guidelines for the handling of LCD monitors

• If the device is not in use over a longer period of time, unplug the power cable.

• To unplug the device without problems, sockets have to be easily accessible.

• Do not unplug the power cable while the device is powerd on, except for emergencies.

• Ensure that the power cable does not get pinched or kinked.

• Do not place heavy objects on the power cable.

General Safety Regulations

8

• Caution high voltage! Never open the device yourself.

• In case of unusual noises, burnt smell or smoke unplug the power cable.

• Do not insert objects into the device through the ventilation slots.

• If the same picture is displayed over a longer period of time, an after-image may arise.

• When exchanging batteries, pay attention to the polarity. Keep batteries away from
children and ensure an environmentally correct disposal.

• Protect your device from splash water.

• When cleaning, please make sure that no liquids get into the device.

• Screens and surfaces can be scratched easily. Therefore, please use the prescribed
cloth only.

• Please use a soft, moist cloth for cleaning.

• For cleaning the screen, please only use commercially available screen cleaner. Do not
spray the cleaner onto the device directly but onto a cloth.

• Please clean ventilation slots regularly to ensure a good air circulation.

• Do not install the device in places where it is exposed to environmental impacts such
as rain or direct sunlight.

• Do not install the device in places where it is exposed to high humidity, dust or smoke.
In case of doubt, please contact your sales partner.

• Ensure sufcient ventilation of the device.

• Keep a minimum distance of at least 10 mm devices to the wall, for devices with inte­grated PC of at least 40 mm.

• Pay attention to the compliance with the operating temperature.

First Installation

9

4. First Installation

Position of connectors and controls

All connectors for power and cables are located at the bottom of the back side of the display.

Connection elements for data cables, keys of the OSD menu,
power cable and on-/ off-switch

Removing the transport lock

Please solve the indicated screws of the transport lock and remove the transportation lock carefully. An operation with
transport security is not provided. Please note that the panel is highly sensitive. Look for acceptance of the transport safety
of the one we have provided handling instructions. Warranty claims due to mechanical damage will not be accepted.

First Installation

10

Exercise caution when installing

It is only allowed to lift and transport the device by the handles. The frame of the panel-casing is only 0,3 mm. By lifting the
device at the frame of the panel-casing, breakage of the glass, defaults of the slots or buckle of the case could be possible

results. It is also not allowed to get the panel under pressure at the frontside.
Defects (especially of the panel), which are made by faulty handling, are not covered by a warranty.

1. grip and transport correclty:

- at rear of the device-sides, only in the area of the casing and handholds

- transport only by twos

2. Avoid:

- press on the panel

- press on the panel-frame

- grip or lift on both sides on the panel-frame/ panel

Mounting with brackets

The monitor can be mounted in landscape format and portrait format. The operating position of the device is perpendicular (90 degrees

to the oor). Pay attention to the permissible tilt angle for wall mounting.

The device can be operated both in landscape mode and in portrait mode. The information is for positioning to note on the back of the
device, always.

VESA-standards: MIS-F 400 x 400 mm (M6)
500 x 380 (Endless Mounting Rail Distec)