DataComm Universal Router Bracket User Manual

DataComm Electronics, Inc.

ETL LISTED

6349 Peachtree Street
Norcross, GA 30071-1725

888.223.7977

770.662.8205
www.datacommelectronics.com

Instruction / Installation Sheet

DataComm Electronics Universal Router Bracket 70-0048

Use DataComm Electronics’ universal router bracket to install any router or modem in
anystructured media enclosure. Just follow the hole pattern for installing the new

universal bracket into any structured media enclosure. Insert the black push pins into
the requiredhole patterns below. Each manufacturer has a different hole pattern.

After installing the universal bracket into the structured media enclosure, just push the
three metal retaining arms towards the back of the enclosure until the desired width of

the router or modem is achieved. Then insert the router or modem into the universal
router bracket. The black plastic tips on the retaining arms will hold the router or modem
in place withoutscratching or damaging the router or modem.

3026001

CONFORMS TO

UL STD 1863

ANSI/UL STD 60950-1

CERTIFIED TO

CAN/CSA STD C22.2 NO 60950-1

3/13/08 Rev. 1