Page 1
G
DataComm
Page 2
LANTEK®6/6A/7G LAN Cable Certification Testers
ANTEK offers a family of high performance cable certification testers to support a full range of LAN cable testing. The LANTEK family
L
of certification testers uses the I
channel and permanent link certification of a cable standard such as CAT6A or ISO-F possible without changing adapters. The same
patented technology also makes DUALmode Testing possible so the users can get any two test results simultaneously. As a result, the
LANTEK Cable Certification Testers save you money and time on the job.
n LANTEK 7G 1GHz is the world’s first independently verified Level IV accurate LAN cable certification tester capable of testing installations
up to 1 G
n LANTEK 6A 500MHz is a Level IIIe verified certification tester designed to support the NEW CAT6A Standard to certify LAN cabling to
support applications up to 1
n L
Hz, exceeding the requirements for CAT6A/7/ISO-F.
ANTEK 6 350MHz
DEAL patented measurement system that removes the effects of ordinary patchcords, thus making
0G Ethernet.
evel III verified LAN certification tester designed to support up to CAT6/ISO-E cabling.
is a L
Features of LANTEK®Products
n
High-Performance LANTEK 7G/6A/6 – sweeps
to 1 GHz and supports testing requirements up to
CAT 6/6A/7/ISO-F and beyond
n
Level IV/IIIe/III Accuracy – independently verified
by ETL for baseline, channel and permanent link
n
DUALmode Testing to Save Time – reports
channel and permanent link test results simultaneously
n
Test with Patchcords to Save Money – performs
CAT6A/6/5e/ISO-Ea/E/D testing with standard
patchcords to achieve the lowest cost of ownership
n
n
Testers
n
Largest Internal/External Memory Capacity –
d management easy
makes r
ecor
Convenient FIBERTEK™ Accessory –
simultaneously tests two fibers f
or attenuation and
length
Innovative TRACETEK™ Accessory – performs
advanced fiber f
ault location and tr
oubleshooting
functions
The only
certifier
to sweep
to 1GHz
G-2
www.idealindustries.com 1-800-435-0705 for Customer Service
Page 3
DataComm Equipment
Kits Include:
PACKAGE AND ACCESSORIES
LANTEK6B
Basic
LANTEK6ABAS
Basic
LANTEK6APREM
Premium
LANTEK6ATRV
Travel
LANTEK7GBAS
Basic
Soft Carrying Case 44 ––4 ––
Deluxe Hard Shell Case –– 4 ––4 –
Airline Grade Travel Case with Wheels –– – 4 ––4
64MB Compact-Flash Memor
y Card
Category 6 Universal Adapters & Reference Cables
Category 6A Universal Adapters & Reference Cables
–
4 –– –– – –
– 44 44 4 4
–
44– 44
Batteries 22 4 4 2 4 4
DUAL Bay Rapid Batter
y Charger
–
–
4
4
Headsets (2), AC Adapters (2),
Hanging Straps (2), Serial Cable (1),
44 4 4 4 4 4
USB Cable (1), LANTEK Reporter Software (1)
Note:
Delivery content may vary outside of US. Please contact your local IDEAL sales office for details.
The airline grade Travel Case fits in most airline overhead storage compartments.
LANTEK7GPREM
Premium
– 4
LANTEK7GTRV
Travel
4
FEATURES
Frequency Range 350 MHz 500 MHz 1 GHz
Supports CAT7 & ISO-F Upgradeable Upgradeable 4
Supports CAT6A Upgradeable 44
Support CAT6/5e/3 and ISO-E/D/C 4 4 4
Accuracy Level III/IIIe (Draft)/IV
(LANTEK6/6A/7G) verified by
Support DUALmode Testing to
Save Time
Test with Patchcords to Save Money 4 4 4
Screen Display Area Best Best Best
CAT6 Test Storage with Graphs 500 500 500
Standard External Compact Flash
Memory
USB/Serial Port 4
Copper TDR T
Fiber Loss Measurement (FIBERTEK) Option Option Option
Fiber Distance to Break (TRACETEK)
Talk over Fiber & Copper
(Full Duplex)
Display Screen on Remote 4
Troubleshooting Tone Generator
on Remote
External Rapid Battery Charger &
Extra Batteries
race
LANTEK6
Basic
ETL ETL ETL
444
Option
4
Option
444
4
Option 44
LANTEK6A
Premium
64MB
Option Option
LANTEK7G
Premium
64MB
44
4
4
4
4
4
4
Other Accessories LANTEK6/6A/7G
Soft Carry Case 3010-12-0096
Deluxe Hard Carry Case 3010-12-0092
Batteries 1219-00-1604
Serial Cable 6011-50-0031
64 MB CompactFlash Card 2112-27-0605
CompactFlash Card Reader for PC 2112-27-0604
LANTEK CAT 6/5e Channel Adapters (ea.) 0012-00-0629
LANTEK CAT 6A/6/5e Channel Adapters (ea.) 0012-00-0656
LANTEK CAT 6A/6/5e Reference Patchcords (ea.) 6011-50-0029
Talkset (2) 3010-70-0015
Dual Bay Batter
LANTEK CA
LANTEK CAT 7 NEXANS Testing Kit 1019-00-1110
Coax Testing Adapter Kit 1019-00-0343
110 Block Testing Adapter Kit 1019-00-1112
BIX Block Testing Adapter Kit 1019-00-1114
66 Block Testing Adapter Kit 1019-00-1115
y Charger 0012-00-0642
T 7 TERA Testing Kit 1019-00-1105
Testers
1-800-435-0705 for Customer Service www.idealindustries.com
G-
3
Page 4
FIBERTEK™ and TRACETEK™ Advanced Fiber Test Options
F
eatures of FIBERTEK™ Products
n
n
n
n
n
n Separate loopback testing method for high precision length
n Outstanding T
FIBERTEKMMP Multimode Fiber Testing Premium Kit
n All of the f
IBERTEKSMP Singlemode Fiber Testing Premium Kit
F
n All of the features of the FIBERTEFKSMB Plus TRACETEKSM
Features of TRACETEK™ Products
n
n
n
n
es signal loss and length
Measur
850nm VCSEL light source enables Gigabit
Ethernet certification on Multimode fiber
Enables bi-directional, dual
elength measurements
wav
Full duplex talkset capability
Provides easy switching of LANTEK
ester between Copper and Fiber
Cable T
AN testing
L
®
emperature Compensation provides highly accurate
test results in a wide variety of environments
eatures of the FIBERTEKMMB plus TRACETEKMM
(below):
(below):
Enables LANTEK®certification testers to provide an event trace
at a fraction of the price of an OTDR
Provides easy switching of LANTEK®certification tester between
FIBERTEK™ loss and length measurement and TRACETEK™
Includes event plots that pinpoint significant losses along the fiber
Provided with launch cable and appropriate connectors
FIBERTEK/TRACETEK PACKAGES
FIBERTEK – 850nm MM Adapter 44 44
FIBERTEK – 1300nm MM Adapter 44 44
FIBERTEK – 1310nm SM Adapter 4444
FIBERTEK – 1550nm SM Adapter 444 4
TRACETKEK – 1300nm MM Adapter 444
TRACETKEK – 1310NM SM Adapter 444
Fiber Cleaning Starter Kit 44444444
62.5/50µm, MM, ST-ST Cable Kit 44 44
62.5/50µm, MM, FC-ST/FC-SC Cable Kit 444
9µm, SM, FC-ST Cable Kit 444 4
9µm, SM, FC-ST/FC-SC Cable Kit 444
See your IDEAL representative for additional
specifications on all certification products.
FIBERTEKMMB
FIBERTEKMMP
FIBERTEKSMB
FIBERTEKSMP
FIBERTEKALLB
FIBERTEKALLP
TRACETEKSM
TRACETEKMM
Testers
G-4
www.idealindustries.com 1-800-435-0705 for Customer Service
Page 5
DataComm Equipment
SIGNALTEK™ Gigabit Ethernet Certifier
SIGNALTEK™ provides a technically innovative method to test and document performance of voice,
data, video and VoIP applications for cabling installers and network technicians. It tests the link's
ability to support applications by tr
performance according to IEEE 802.3ab Gigabit Ethernet standard. By monitoring transmitted and
received data packets, it can report the BERT (Bit Error Rate Test) for the link. It uses the latest
generation of Gigabit Ethernet technology to provide the best performance to this new class of testers.
Features of SIGNALTEK™
n
Unique - Simulate real world network traffic with full-duplex
gigabit performance testing
n
Unique - User selectable 10/100/1000 Bit Error Rate Testing
(BERT) to ensure performance for all Ethernet devices
n
Unique - Smart autotest function detects line condition and
automatically chooses appropriate test to run to allow testing
cable that is terminated with a SIGNALTEK remote, a
network device or unterminated
n
Unique - Save time using the remote to perform 10/100 or
gigabit service detection AND initiate an Autotest when main
unit is connected
n
Unique - Maximum flexibility with two USB ports. Connect
to a computer to upload test results, connect directly to a
printer, or connect a USB memory drive for unlimited storage
n
Unique - Get maximum coverage with a full two-year warranty
n
Unique - Configure multiple target IP addresses for pinging
several network devices to ensure communications with
servers, printers, IP cameras, home automation controls, etc.
n
Offers network interrogation tools such as link establishment,
port LED blink and ping
n
TDR to accurately measure length and locate shorts and opens
n
ARP test discovers active network devices
n
Exceeds 100m measurement dist
802.3ab gigabit Ethernet standard
n
Easy-to-read Pass/Fail performance reports that can be
stored and printed for customer documentation
n
Multiple BERT configurations for VoIP, data, and video-overIP specific testing
n
Brilliant high-resolution color display visible in any lighting
condition
n
Uses readily available AA batteries
n
iremap faults easily with selectable 568 A/B color coding
W
ansmitting Ethernet packets on the wire and measuring the link
Description Cat. No.
SIGNALTEK™ Kit 33-974
Universal 120-240V Power Adapter 4010-00-0136
RJ-45 to 8 Head Alligator Clip K-7920
Replacement Cable Accessory Kit - contains all original
cables in SIGNALTEK™ Kit
#33-974
E
ance required by I
E
1219-91-0003
Testers
SIGNALTEK™ Specifications
ypes
Cable T
n Voice/phone cable - USOC/RJ-11/RJ-12 interface
n Data Cable - STP/UTP (RJ-45) for CAT 3/5e/6/6a/7 cabling
abling
8 c
9, 5
n Coax c
Physical Dimensions
n Display handset: 7
n Remote handset: 6.8” L x 3.5” W x 1.5” D
n Near-end Weight: 12.5 oz.
1-800-435-0705 for Customer Service www.idealindustries.com
able - via RJ-45 to F P
(50/75 Ohm)
.9” L x 3.6” W x 1.5” D
atchcord, serie
s 6, 5
Ports/Connections
face por
n RJ-45 te
n Mini U
n St
n D
st inter
A” port
B “
S
andard U
C power input for long-term network monitoring
SB “B” port
t
G-
5
Page 6
SIGNALTEK™-FO Multimedia Ethernet Certifier
SIGNALTEK-FO is the first active ethernet certifier that offers both copper and fiber optic testing; and SIGNALTEK-FO does
or less than the price of an Optical Test Set alone.
it f
n Fiber Optic and Copper Gigabit Certification – Qualify copper and fiber-optic cabling to IEEE 802.3 standards
n Multimedia Gigabit Certification (Multimode and Single Mode capability) – Qualify short and long r
to a distance of up to 1
n BERT and Optical Attenuation Measurements – Perform Bit Error Rate Testing and decibel (dB) loss measurements
0km
of optical links.
n Dual W
avelength Capability – available in both 850nm and 1300mn wavelengths to support virtually all LAN and
campus fiber applications.
n Small Form factor Pluggable (SFP) modules are compact, light-weight and field changeable.
n Storage and Reporting for Thousands of Reports – Store and print Qualification reports for copper and fiber jobs
using internal memory or USB “thumb-drives”.
#33-983
Description Cat. No.
SIGNALTEK™-FO w/850 Modules 33-981
SINGALTEK™-FO w/13X0 Modules 33-982
SIGNALTEK™-FO w/850 & 13X0 Modules 33-983
SIGNALTEK™-FO w/o Modules (Fiber-Ready) 33-987
ange cabling
10 Gigabit Alien Crosstalk Testing Kit
Testers
P
erform a standard 6-around-1 cable test with PS ANEXT and PS AACR-F results
for both ends of the cable in as little as 5 1/2 minutes compared to over 20 minutes for
some competitive models.
n Add Alien Crosstalk testing capability to any LANTEK
S Alien NEXT and Attenuation to Alien Crosstalk Ratio measurements
orm P
erf
n P
n Unique Dual-port AXT adapter allows PSANEXT testing with just one handset
or quick initial site testing
f
n Dual-handset mode allows complete AXT certification 4 times faster
than other A
n No PC required in the field - all test results calculated on-the-fly for
T test systems
X
instant pass/fail indication
n Kit includes 2 Dual-port AXT adapters, 12 AXT terminators, shielded
patch cords, manual, firmware update and PC reporting software
Description
Alien Crosstalk T
esting Kit for LANTEK
®
6A or 7G
Cat. No.
LANTEK10GBKIT
G-6
www.idealindustries.com 1-800-435-0705 for Customer Service
Page 7
DataComm Equipment
SecuriTEST™ PRO CCTV/Security Tester
SecuriTEST™ PRO adds to the already impressive capabilities of the SecuriTEST™
by including all the features of the original, plus IRE testing (video and sync levels),
audio lev
and lighter than before. The SecuriTEST™ PRO has all the features and
functionality that CCTV technicians need to install, test and maintain analog
security camer
case (optional with the standard SecuriTEST™).
Features of SecuriTEST™ PRO
n
n
n
n
n
n
el testing, a high-capacity lithium ion battery in a package that’s smaller
a systems. SecuriTEST™ PRO also includes a custom carrying
All the same features of the
UTP Test Port
SecuriTEST™ plus:
Audio Input
NEW - IRE video level and sync tests
NEW - Sound level test through integrated
speaker and on screen level indicator
NEW - High capacity lithium ion battery
NEW
NEW - Support for additional PTZ protocols
NEW - Carrying case included
Description Cat. No.
SecuriTEST™ PRO CCTV/Security Tester only 33-892
SecuriTEST™ Tester Pouch only 62-891
LED Indicators
PTZ Control Pad
IRE On/Off
Carrying Case (62-891)
SecuriTEST™ CCTV/Security Tester
CCTV installers often need to carry a variety of testing tools to complete their work.
SecuriTEST combines the most-needed tools in one easy-to-carry package. Since all
connections (video/communications/DMM) attach to a single unit, SecuriTEST
al devices while on a ladder or lift, making working
eliminates the need to juggle sev
conditions safer and increasing productivity.
n Seven Essential CCTV Tools – Combines a CCTV video tester, PTZ camera
controller, Digital Multi-Meter, UTP cable tester, video test pattern generator,
PTZ protocol analyzer and camera programmer in a single compact package.
n Save Time & Money – Test, aim, focus and program cameras when working
alone. Sav
e time by not having to walk back to the contr
functionality of each camer
n Compact Design – Combines all the most needed—security tools in a
lightweight, easy-to-carry unit. Sharp, bright 2.5in (6.3cm) color L
with on-screen displays for PTZ
control/diagnostics and DMM
eadouts.
r
n PTZ Protocol Analyzer –
Compatible with 20+ PTZ
protocols to test and program
cameras in the field. Decodes
and identifies output from
PTZ console to aid in
troubleshooting.
er
ol center to v
erify
a.
CD screen
Test Lead Ports
LED Indicators
Main Power Switch
PTZ Control Pad
est Lead Ports
T
Testers
Description
SecuriTEST™ CCTV/Security T
SecuriTEST™ T
ester Pouch only
ester only
Cat. No.
33-891
62-891
Includes: Rechargeable batteries,
, car charger
charger
AC
wiremap terminator
manual.
, test leads,
, neck strap and
1-800-435-0705 for Customer Service www.idealindustries.com
G-
7
Page 8
LinkMaster™ PRO and LinkMaster™ PRO XL Testers
he LinkMaster™ PRO & LinkMaster™ PRO XL Testers enable
T
installers, contractors and maintenance technicians to map, test
and troubleshoot data and voice communication cable and coax
runs. Rugged, versatile, and easy-to-use, they have mastered the
link between perf
and residential applications.
Features
Description
Blinks the hub n
Displays length measurement with test results n
Remotes have both RJ-11 and RJ-45 jacks n
Backlight LCD screen n
Measures length on UTP, STP and coax nn
Tests UTP for shorts, opens, miswires, reversals,
split pairs and shield continuity
Test coax for opens, shorts and continuity nn
Shows wiring errors nn
Tests and identifies with all eight twisted pair
and coax remotes
Sends tone with four different signals n n
Displays test results in wire map format n n
Snap-off battery cap n n
9 volt battery included n n
LAN Cable Testers
Kits
ormance, simplicity and value for both commercial
LinkMaster™ LinkMaster™
PRO PRO XL
nn
n n
Description
one &
Kit w/eight
Kit w/eight
Probe
LinkMaster™ PRO XL
remotes 33-880
LinkMaster™ PRO XL
remotes and T
Cat. No.
33-881
Remote Jack for Patch Cords
Main Jack for all Testing
Larger Backlit LCD
Screen
Six Modes of Operation
• Cable Test
• Hub Blink
• Tone
• Length
• Coax
• Setup Mode
Press SEL to:
• Turn on back-light (Hold 2 sec)
• Execute current displayed mode
• Start new test cycle
• Select one of four tones
Change pair being measured
•
for length
• Change user selectable options
– Beep On/Off
– Unshielded or Shielded Cable
– Units—Feet or Meters
Arrow Keys
• To change length constant
• To change pair or pin selection for tone
• To scroll through setup selectable options
Accessories
Description Cat. No.
RJ-45 to RJ-11Jack Adapter (2/card),
POP Packaging
RJ-45 to F-Connector Adapter (2/card),
POP Packaging
LinkMaster™ Pro XL
2-8 only (white carton)
Remotes UTP/STP
LA-4233
LA-4234
,
LA-4235
G-8
LinkMaster™ PRO XL
remotes – International Packaging 33-886
LinkMaster™ PRO XL
w/one remote
LinkMaster™ PRO Kit w/eight
remotes – Unshielded Jumper Cables 33-825
LinkMaster™ PRO Kit w/eight
remotes – Shielded Jumper Cables 33-826
LinkMaster™ PRO Economy Kit w/one
remote – Unshielded Jumper Cables 33-835
LinkMaster™ PRO Economy
remote – Shielded Jumper Cables 33-836
Kit w/eight
Economy Kit
Kit w/one
33-887
LinkMaster™ Pro XL Large Replacement Case
Security/Speaker Kit – 8-Position Modular
Adapter and eight RJ-45 to Alligator Clip
Lead Sets
BNC Accessory Kit
Set of Eight Color
LinkMaster™ Pro or Pro XL
LinkMaster™ Pro Large Replacement Case
Replacement Economy Kit Case
-Coded F-T
erminators for
H-3412
LA-4157
LA-4173
LA-4159
H-3324
H-4868
www.idealindustries.com 1-800-435-0705 for Customer Service
Page 9
DataComm Equipment
VDV MultiMedia Cable Tester
Easy-to-use tester f
with voice, data and video applications.
One tester for all applications!
n Voice — supports 3-pair USOC
and 6-position RJ-11/12 jacks for
telephone cable testing
n Data — supports both shielded and
unshielded cable testing to T568A/B
(RJ-45)
n Video — tests coax cable for opens
and shorts with F-connector interf
n Tests for opens, shorts, miswires,
reversals and split pairs. Also indicates
correct wiremap. Has automatic shut
off (to prolong battery life) and low
battery indicator.
n Easy-to-read LCD display with “PASS/FAIL” indicator after each
test
n Tone generator supports four different tones making fault isolation
easier
n One remote wiremap and testing unit is stored inside tester —
easier to keep all parts together
n Uniquely designed remote accommodates RJ-11, RJ-45 and
F-style connectors
Description Cat. No.
Kit with integrated remote and accessories 33-856
or installers working
ace
Amplifier Probe and Tone Generator
NEW
Design
62-164 62-160
Amplifier P
n Identifies and traces wire or cables within a group
n Battery low indicator
Tone Generator
n Emits three different types of tones
n Auto-off after thr
n F-Connector port for toning & tracing coaxial CATV cabling
systems
n Tone can be added in any status
Description Cat. No.
Amplifier Probe 62-164
Tone Generator 62-160
Amplifier Probe & Tone Generator Kit - includes 62-164, 62-160,
Lead Set, Cable Assembly & Standard Replacement Tip
robe
ee hours of non-use
33-864
TRACETone™ Tone Generator &
Amplifier Probe
n Test continuity and locate signal
of installed wire and cable
n Two selectable tone styles
n Tone Generator & Amplifier
Probe fit together for easy storage
a-deep serr
n Extr
n RJ-11 Alligator Clip, RJ-11 Cable Assembly included
Description Cat. No.
one™ Tester and Accessories
TRACET
ations grip wir
e better
62-140
Also available in these kits:
33-916 33-917
LinkMaster™ Tester
Tests wiring configurations on
UTP/STP cables. Checks for
shorts, miswires, reversals and
split pairs. Debug feature,
automatic shut-off and low
battery LED indication.
n Designed to test installed
twisted pair wiring
n Tests unshielded and shielded
modular plugs
n Main unit and r
emote allow one
NEW
Design
person testing
Description Cat. No.
LinkMaster™ Tester and Remote 62-200
Smart6™ Modular Tester
n 6-position Tester
n Incoming call identification
Description
Smart6™ Modular T
ester
Cat. No.
62-096
Testers
1-800-435-0705 for Customer Service www.idealindustries.com
G-
9
Page 10
OmniSeal™ Pro Compression Tools
The new IDEAL OmniSeal™ Compression Tools now offer additional features and increased
connector compatibility in a smaller, more compact tool designed to meet the demands of
ofessional installer. (OmniSeal requires no accessory attachment to terminate IDEAL
the pr
branded compression connectors.) Most other manufacturers compression connectors
can be terminated with an easy plunger depth adjustment. The simple intuitive design
combined with its size and universal connector acceptance makes this the only
ession tool needed by professional installers.
compr
n Factory preset to work with IDEAL compression connectors
n Compresses F-type, RCA, BNC and Mini connectors
n Adjustable to fit other manufacturer’s connectors — no accessory
adapters required
n Connectors approved for use by satellite and cable TV companies
Description Qty. Cat. No.
OmniSeal™ Pro XL Compression Tool 1 30-793
OmniSeal™ Pro Compression Tool 1 30-603
BNC F-Type RG11 RCA Mini Coax
OmniSeal™ Pro XL
30-793
OmniSeal™ Pro
30-603
User-friendly spring
loaded handle
Textured Santoprene
slip resistant comfort
grip
™
Convenient
handle lock
for easy fit
in pouch
OmniSeal Pro
30-603
OmniSeal Pro XL
30-793
Compresses F-type,
Mini F-type, RCA, and
Mini RCA connectors
Handy 7/16”
hex socket
for easy
connector
to cable
installation
Compression Tools
High strength aluminum
body for durability
and long life
Also available in these kits:
33-630 33-624 33-945
Economy Compression Tool
n Easily compr
compr
n Permanent connection – never
comes loose
n Works with most br
compression connectors
esses series 6 and 59 coax
ession F-connectors
ands of
Adjustable to fit
multiple cables
and connectors
Description
Economy Compression T
Economy Compression T
ool
ool Kit - Includes four RG-6
Connectors
For BNC
connectors
(Model 30-793)
Cat. No.
30-633
33-633
G-10
www.idealindustries.com 1-800-435-0705 for Customer Service
Page 11
DataComm Equipment
Crimpmaster™ Crimp Tools & Die Sets
High quality ratchet-type crimp tool for electricians, contractors and installers who require guaranteed repeatability of good mechanical and
electrical connections.
Description Cat. No.
Dies change quickly and easily
with a scr
Inter
pr
in a single tool
ewdriver.
changeable dies
ovide versatility
Pressure adjustment
or actuation force
f
Crimp release provides
oper
Ratchet crimp action
ovides repeatable and
pr
eliable terminations
r
ator safety
Crimpmaster™ Crimp Tool Frame 30-506
Also available in these kits:
33-400 33-917
30-556
RJ-11 Crimp Tool for two, four or
six-position modular plugs
Tool w/die N/A
30-559
RJ-45 Eight-position Crimp Tool
for keyed or non-keyed modular
plugs
Tool w/die
30-560
RJ-45 Eight-position Crimp Tool
for AMP RJ-45 modular plugs
Tool w/die
30-570
RG-6, RG-174, Belden-Type
RG-8281 cables (Hex. 0.324
(8.23mm), 0.178 (4.52mm),
0.068 (1.73mm)
Tool w/die N/A
30-572
16-26 AWG (1.31mm2- .128mm2)
miniature insulated rings, spade
and butt splices
Tool w/die N/A
30-522
30-521
30-577
N-Series and RG-8/11 Connectors
(Hex, 0.429 (10.90mm), 0.100
(2.54mm), 0.080 (2.03mm)
Tool w/die 30-482
30-578
RG-59, RG-6, and 8281 50 and 75
OHM cables (Hex, 0.324(8.23mm),
0.255 (6.48mm), 0.068 (1.73mm),
0.042 (1.07mm)
Tool w/die 30-483
30-579
22-10 AWG (.324mm2- 5.261mm2)
insulated terminals/color coded
nests
Tool w/die 30-500
30-580
22-8 AWG (.3mm2- 8mm2)
non-insulated terminals
Tool w/die N/A
30-581
RG-58, RG-59/62, BNC/TNC Coax
Connectors (Hex, 0.255 (6.48mm),
0.213 (5.41mm), 0.068 (1.73mm)
Tool w/die 30-502
30-587
RG-58, RG-174 and RG-8218 for both
50 and 75 ohm cables (Hex 0.213
(5.41mm), 0.178 (4.52mm), 0.068
(1.73mm), 0.042 (1.07mm)
Tool w/die N/A
30-591
Plenum and Non-Plenum Thinwire
Cables RG-58 and 59 (Hex, 0.213
(5.41mm), 0.190 (4.83mm), 0.068
(1.73mm), 0.042 (1.07mm)
Tool w/die N/A
30-593
Mini UHF and BNC/TNC 5 cavity
(Hex, 0.052 (1.32mm), 0.068 (1.73mm),
0.100 (2.54mm), 0.213 (5.41mm),
0.255 (6.48mm)
Tool w/die N/A
30-594
Fully Insulated quick disconnect
terminals with thinner wire barrels
22-10 AWG (.324mm2- 5.261mm2)
Tool w/die N/A
Crimp Tools/Die Sets
30-599
30-18 AWG (.205mm2- 2.08mm2)
Open Barrel Pins and Sockets
Tool w/die N/A
30-573
Cambridge CP-88, CP-89 BNC/TNC
coax connectors with RG-58,
RG-59/RG-62 AU cables (Hex 0.305
(7.75mm), 0.068 (1.73mm), 0.228
(5.79mm)
Tool w/die 30-481
30-576
RG-174, Mini 59 BNC/TNC
Connectors (Hex, 0.178 (4.52mm),
0.128 (3.25mm), 0.068 (1.73mm)
Tool w/die 30-485
30-582
F-type CATV RG-59, RG-6
Connectors (Hex, 0.350 (8.89mm),
0.320 (8.13mm), 0.255 6.48mm)
Tool w/die 30-503
30-586
22-12 AWG (.324mm2- 3.31mm2)
Non Insulated Open Barrel
Connectors, Commercial Type
Tool w/die N/A
30-479 (Tool w/die)
For insulated terminals, 22-10 AWG
with built-in locator
1-800-435-0705 for Customer Service www.idealindustries.com
G-
11
Page 12
Punch Down Tools
35-485
35-492
35-185
Impact Turn-Lock™ Punch Down Tools Cat. No.
Punchmaster™ II Punch Down Tool - body only 35-483
Punchmaster™ II Punch Down Tool w/110 blade 35-485
Punchmaster™ II Punch Down Tool w/66 blade 35-487
Non-Impact Turn-Lock™ Punch Down Tools Cat. No.
Punch Down Tool w/110 blade 35-492
Punch Down Tool w/66 blade 35-493
Economy Punch Down Tool Cat. No.
Non-impact Tool w/permanent non-cut blade 35-185
Removable Blades* Cat. No.
110 Turn-Lock™ blade 35-495
66 Turn-Lock blade 35-497
110/66 combo blade w/cutting edges 35-407
Krone®blade 35-478
Bix®blade 35-479
*Not applicable for Economy Punch Down tool.
®
Bix
is a registered trademark of Nortel. Krone®is a registered trademark of Krone, Inc.
Ratchet Telemaster™
n For paired conductors
n Ratchet version of popular
Tools
Telemaster™ Tool for RJ-45
and RJ-11 modular plugs
n Repeatable crimp action f
or
consistent, high quality connections
35-495
110 Blade
35-497
66 Blade
35-407
110/66 Blade
35-478
Krone
Also available in these kits:
33-505
33-705
Telemaster™ Telephone Tools
n For paired conductors
n Multi-function telephone
tool cuts, strips and crimps
for easy one-tool application
. (Crimps primary modular
n Steel fr
plug str
or long-term dur
ame f
elief only)
ain r
ability
®
Blade
35-479
Bix®Blade
Description
elemaster™
Ratchet T
Replacement
Cut & Strip Blade Set for 30-696
Cat. No.
30-696
LA-4102
Modular Plug Tool Kit
n Multi-function telephone/network
tool; cuts, strips and crimps
n Steel fr
n Inter
n Tool-less die change for added convenience
n Spring return handle for comfort
Description Cat. No.
Modular Plug Tool Kit 33-296
G-12
ame construction
for durability
changeable dies allow f
or
crimping RJ-45 and RJ-11 modular plugs
www.idealindustries.com 1-800-435-0705 for Customer Service
Description Cat. No. Cat. No.
Tool for RJ-11 (1, 2, 3 pair) and RJ-45 (4 pair) Plugs 33-700* 30-496
Tool for RJ-45 (4 pair) & DECconnect MMJ (RJ-11, 3 pair) N/A 30-497
ool for RJ-11 (1, 2, 3 pair) & DECconnect MMJ
T
(RJ-11, 3 pair)
ool for RJ-22 (handset) and RJ-11 (1, 2, 3 pair)
T
Replacement Cut and Strip Blade Set for T
Kit includes 10 each, RJ-45 8P8C, RJ-11 6P6C and RJ-11 6P4C modular plugs.
elemaster™
Kit Tool Only
N/A
N/A
N/A
30-498
30-499
LB-1747
Also available in these kits:
33-704 33-750
Page 13
DataComm Equipment
Kinetic Super™ Wire
Stripper/Crimper
n Easily cuts and strips
22 to 24 AW
wire
Description Cat. No.
Kinetic Super™ Wire Stripper/Crimper 45-719
G solid
4-Way Indent Crimp Tools
Crimp solid barr
RS232 interface connectors.
Feature four-way indent dies
S22520 specifications),
(per M
full cycle ratchet, built-in pin and
socket locator and comfort-grip handles.
n High-grade steel construction for outstanding performance
Description Cat. No.
20-26 AWG (.519 mm2- .128 mm2) RS232 D-sub
Round Barrel Contacts, Pins or Sockets
16-22 AWG (1.31 mm2- .324 mm2) Round Barrel
Contacts, Pins, Sockets and Deutsch 16 Pin Contacts
Trompeter BNC Connector Center Pins 35-468
el contacts for
35-465
35-465
35-466
D-Sub/Double-D Service Tool
n Exact r
n Also crimps
n Includes openings for crimping insulated terminals and cutters for
Description Cat. No.
D-Sub/Double-D Service Tool 30-426
eplacement of the AMP openbarrel service tool for stamped
contacts and D-Sub contacts
Double-D, high
density, miniature
contacts
machine screws
Coax Strip and Crimp Tool
n
Precision, form-ground stripping
holes remove outer jacket
and insulation from
RG-59 and RG-6
coaxial cable
n
Durable blades cut
copper-coated steel
conductors
n
Three crimping nests for crimping F-connectors and ring terminals
n
Cushioned, comfort-grip handles
Description Cat. No.
Coax Strip & Crimp Tool 30-433
Coax Strip & Crimp Tool Kit w/ten RG-6 F-Connectors 30-433F
1-800-435-0705 for Customer Service www.idealindustries.com
G-
Tools
13
Page 14
UTP/STP/Coaxial Cable Strippers
Multi-Strip Coax/UTP Cable Stripper
n Adjustable blades can be set for any depth to help ensure nick-
free stripping and slitting of cables
45-164
45-162 45-163 45-165
Description RG Cables Cat. No.
Coaxial Cable Stripper, RG-174, 45-162
up to 1/8 in. (3.2mm) O.D RG-187 (Gray)
Coaxial Cable Stripper, RG-58,CB 45-163
1/8 in. (3.2mm) to 7/32 in. (5.556mm) O.D. Mini Coax (Blue)
Strippers
Coaxial Cable Stripper, 1/4 in. (6.4mm) to 45-164
9/16 in. (14.3mm) O.D.
Cable Stripper, 3/16 in. (4.8mm) to 5/16 in. RG-59, 45-165
(8mm) O.D. UTP Cable (Black)
Replacement Blade Set* for 45-162,
45-163, 45-165
Replacement Blade Set* for 45-164
*A set of blades consists of three straight blades and one round blade.
Typical
RG-11, RG-8
__
__
(Blue)
L-9225
L-9226
n Strips UTP, RG-59 and RG-6 coax cable
rovides a 1/4 in. (minimum) x 1/4 in.
n P
strip on coax
n Spare cartridge compartment
provided
ush-on ring for easy
n P
connector termination
Description Cat. No.
Coax/UTP Cable Stripper 45-603
RG-6/59 Replacement Cartridge LB-2726
RG-7/11 Replacement Cartridge LB-2728
UTP Replacement Cartridge LB-2727
Coax Stripmaster®Wire Strippers
rovides precision stripping with easy spring
n P
cushion grip
e-type blades feature multiple hole
n Knif
diameters sized for two step removal of outer
jacket insulation and center conductor
Description Type (RGU) Cat. No. Cat. No.
Coax Stripmaster®for RG-6 RG-6 LB-740 45-262
Coax Stripmaster®for RG-59 RG-59 LB-743 45-265
Coax Stripmaster®for RG-6 RG-6
Quad Shield Quad Shield
Coax Cable Repl. Blade
LA-3953 45-282
Mini Coax Stripper
n Adjustable stripper for mini
coax cable
n Provides a 1/4 in. x 1/4 in.
strip
Description Cat. No.
Mini Coax Stripper 45-529
RG-11 Coax Strippers
n RG-11 45-011 Coax Stripper - for use with IDEAL RG-11 push-on
connectors, provides a 1/4 in. x 1/8 in. strip
G-11
L R
A
E
G-11 45-111 Coax Stripper - f
n R
Description
RG-11 Coax Stripper for Push-On Connectors 45-011
RG-11 Coax Stripper for Compression Connectors 45-111
ession connectors, provides 1/4 in. x 1/4 in. strip
compr
G-14
www.idealindustries.com 1-800-435-0705 for Customer Service
or use with I
D
Cat. No.
NEW
45-011
45-111
Page 15
DataComm Equipment
Coax Cable Stripper
n For RG-6, RG-6 Quad and RG-59
n No adjustment required
n Strips center conductor and
cable jacket
Description Cat. No.
Coax Cable Stripper 45-320
Coax Connector Kit w/four Push-On F-Connectors 33-320
UTP Cable Stripper
n Strips Cat 3, 5, 5e & 6 cables
n One-step stripping
Description Cat. No.
UTP Cable Stripper 45-167
Round Cable Slitting and Ringing Tool
n Cuts around cable jacket as well as
slits the length of jacket for
easy removal
n Use with single or multiple
conductor cable up to
1.75 in. O.D.
n Blade adjusts for jacket thicknesses up to .125 in.
n Spare blade in handle base
Description Cat. No.
Round Cable Slitting and Ringing Tool 45-144
Replacement Blades for 45-144 (2/pkg.) LB-1748
Toggle®Coax Strippers
n Toggle®Tools for stripping Ethernet,
hinnet, RG-62 or RG-59 coax cable
T
and other cable sizes
Description Cat. No.
Coax Stripper for RG-8/11U 45-510
Coax Stripper for RG-6 45-513
Cyclops®Data Cable Stripper
n Fast, easy removal of outer sheath
insulations (PVC and Plenum types,
UTP & STP)
Description Cat. No.
Data Cable Stripper for unshielded and shielded twisted pair cable 45-514
Simplex/Duplex 3mm
Jacket Stripper
n Designed to remove the jacket from 3mm Simplex or Duplex (zip
cord) fiber optic cable
n Form-ground, knife-type blades for accurate easy stripping without
damaging the fiber or Kevlar®strength member
n Contoured, comfort-grip handles to reduce operator fatigue
Description Cat. No.
Simplex/Duplex 3mm Jacket Stripper 45-349
Note: Kevlar®is a registered trademark of DuPont.
Coax Strippers
n Specific adjustments
needed for each cable
size
Description Cassette Cat. No.
Coax Stripper - 2 Step
• For most IDEAL compression connectors and 45-524
single crimp/twist-on BNC/TNC (Blue)
• Strips 0.250 in. or 6.35mm
Coax Stripper - 3 Step
• For crimp BNC and TNC connectors
• Strips braid 0.240 in. or 6mm and (Black)
Dielectric 0.240 in. or 6mm
Coax Stripper - 3 Step
• For dual crimp BNC/TNC and Thinnet BNC conn.
• For 735A Belden
• Strips braid 0.328 in. or 8.2mm and
dielectric 0.109 in. or 2.7mm
®
cable 45-523
1-800-435-0705 for Customer Service www.idealindustries.com
Replacement
45-522
(Brown)
45-526
45-520
45-521
1/4 in. x 1/4 in. standard strip.
1/4” 1/4”
G-
Strippers
15
Page 16
Data T®-Cutter
45-074
n Cuts round communication cable and maintains cable geometry for
better cable performance
n Cuts multi-pair cable up to .5
00 in. (12.7mm) and coaxial cable up to
RG-9/U
n Suitable for soft cables (not ACSR)
n Steel reinforced center conductors can be trimmed with bolt cutting
holes
n Locking latch keeps tool closed in pouch
n Data T®-Cutter I
I designed for RG-59 and RG-6 coaxial cable
Electrician’s Scissors
35-088
35-089
Cutters/Scissors
Lever™ -Snips Electrician’s Scissors
with Stripping Notches
45-075
35-093
Description Cat. No.
Data T®-Cutter 45-074
Data T®-Cutter II 45-075
n Designed for use in telephone and electrical service applications
n Cut up to 16 AWG solid and 12 AWG stranded wire
n Serrated surface on back blade edge cleans wire
n Electrician’s Scissors with stripping notches strip 19 and 23 AWG wire
Description Cat. No.
Electrician’s Scissors w/stripping notches 35-088
Electrician’s Scissors 35-089
Cable Splicing Knife and Leather Holder 35-091
Leather Knife Holder Only 35-092
Cable Splicing Kit (Scissors, Splicing Knife, Leather Holder) 35-093
Leather Holder only for Scissors and Knife 35-094
Economy Round Cable
and Wire Cutter
gonomic design giv
n Er
added lev
n Spring-action, mechanical
age
er
es
advantage increases stripping
leverage and reduces operator fatigue
n Double plated f
a-deep serr
n Extr
Description Cat. No.
Electrician’s Scissors with Stripping Notches 35-087
or added rust pr
ations grip wir
e better
otection
Also available in these kits:
33-917 33-623
G-16
www.idealindustries.com 1-800-435-0705 for Customer Service
n Cuts multi-conductor cable
2.7mm)
00 in. (1
up to .5
and solid or stranded
wire up to #8 AWG
2
0mm
(1
)
n Built-in return spring, locking latch
n Stamped, hardened steel frame with curved cutting blades
Description
Multi Conductor Cable to .500 in. (12.7mm)
Solid or Stranded
Cat. No.
35-051
Center Conductor Cutter
n Trims coax center conductor to
3/16 in. (4.8 mm) length for
oper installation into a dual
pr
crimp coax connector.
Description Cat. No.
Center Conductor Cutter 35-060
Page 17
Splitters
DataComm Equipment
1-800-435-0705 for Customer Service www.idealindustries.com
G-17
Surge Suppression Cable Splitters
4-Way Digital Surge Suppression Cable Splitters withstand a one-time surge up to 6KV on cable line
Q Bandwidth: 5 MHz - 1 G Hz
Q Impedance: 75 ohm
Q Over 130 dB of RFI Shielding
Q Low 8 db Insertion Loss
Description Cat. No.
2-Way Surge Suppression Splitter 85-135
4-Way Surge Suppression Splitter 85-137
Grounding Blocks
Q Solid zinc alloy, nickel plated and chromate finished
Q High Performance beryllium copper contact
Q Excellent electrical performance 0 - 3,000 MHz
Q Dual grounding holes can accept up to #6 wire
Q UL/CSA approved
Description Qty. Cat. No.
3 GHz Double Grounding Block 1/card 85-311
3 GHz Quad-Square Grounding Block 1/card 85-313
85-311
85-313
Satellite and Digital TV Splitters
Description Qty. Cat. No.
2-Way, 5MHz - 2.3GHz 1 85-332
3-Way, 5MHz - 2.3GHz 1 85-333
4-Way, 5HMz - 2.3GHz 1 85-334
85-332
85-333
85-334
Description Quantity Cat. No.
CATV Cable Splitter, 5-900 MHz, 2-Way Card of 1 85-032
CATV Cable Splitter, 5-900 MHz, 3-Way Card of 1 85-033
CATV Cable Splitter, 5-900 MHz, 4-Way Card of 1 85-034
High Performance Cable Splitter,
Card of 1 85-132
5MHz-1GHz 2-Way
Box of 10 86-132
High Performance Cable Splitter,
Card of 1 85-133
5MHz-1GHz 3-Way
Box of 10 86-133
High Performance Cable Splitter,
Card of 1 85-134
5MHz-1GHz 4-Way
Box of 10 86-134
Splitters
85-132 85-134
Description Cat. No.
Digital Cable Splitter, 8-Way 85-138
Digital Cable Splitter
Q Nickel-plated housing
Q High-performanceimpedance-balanced
Printed Circuit Board design
Q Bandwidth: 5MHz - 1 G Hz Impedance: 75 Ohm; over 120 dB of
RFI shielding; Splits signals up to 8 outlets
Diplexer, 2.3 GHz
Q Combine or split cable/antenna signals
with satellite signals
Q High quality PCBdesign
Q Nickel-plated die-cast zinc housing
Q Grounding hole for up to 6 AWG wire
Q PCB Printed Circuit Board Design
Q Nickel Plated Housing
Q Splits signals up to 4 outlets
85-133
Description Cat. No.
Diplexer, 2.3 GHz, SATV/TV Combiner Splitter - 2 Amp 85-323
Q Designed for easy mounting over cable
Q All ports are F female connectors, 75Ω
Q Two grounding screws eliminate the need for grounding block
Q Single port power pass
Terminators (85-038) needed for all unused
ports for optimal performance
Page 18
Compression Connectors for Every Application
Reg/Tri/Quad & Plenum F-Connectors
• Fits 60% regular, tri-shield and quad cables
• Nickel-plated, brass-construction for superior corrosion resistance
Approved for use by satellite and cable TV companies
•
Approved for indoor and outdoor use
•
Use 30-603, 30-793 or 30-633 Compression Tools
•
RG-11 F-Connectors
• Fits 60% regular RG-11 cable
• Nickel-plated, brass-construction for superior corrosion
resistance
• Approved for use by satellite and cable TV companies
• Approved for indoor and outdoor use
• Use 30-603 or 30-793 Compression Tools
BNC Connectors
• Nickel-plated, brass-construction for superior corrosion resistance
• Moisture-inhibiting design
• Approved for indoor and outdoor use
• Use 30-793 Compression Tool
• 75 Ohm nominal impedance
• Gold-plated pin contact area
NEW
OmniCONN™ F-Connectors
Non corrosive nickel plated brass body and polyc
•
Delrin/Nylon adapter sleeve and o-ring provide double protection for
•
a water
• Free spinning hex nut for ease of installation onto all 7/16 ports
• 75 ohm nominal impedance
• Bandwidth up to 3 GHZ
Mini R
• For use with most 21-25 AWG mini coax cable
• Body is nickel plated for outstanding corrosion resistance
•
• Bandwidth is 5 MHz - 3 GHz, Impedence is 75 Ohms (nominal),
tight seal
CA Connectors
CA head is gold plated for superior cont
Mini R
return loss min. -30 dB @ 3 GHz
R
•
• 75 ohm nominal impedance
• Bandwidth up to 3 GHZ
• Compatible with 30-603 and 30-793 Compression Tools
arbonate bushing
Connectors
CA
Constructed of nickel plated brass and gold plated head
formance
act per
F-Connector
RCA
Connector
G-18
www.idealindustries.com 1-800-435-0705 for Customer Service
Page 19
Compression Connectors
DataComm Equipment
Connector Type Cable Type Qty. Cat. No.
Card of 4 92-654
F
F
F
F RG-11
F RG-6
F
BNC RG-6
BNC RG-59
RCA RG-6
RCA RG-59
RG-6
Reg/Tri/Quad
RG-6
Plenum
RG-59
Reg/Tri/Quad
RG-6
Quad
Card of 10 92-651
Jar of 50 92-650
Jar of 100 92-656
Box of 1,500 92-659
Jar of 50 92-660
Box of 1,500 92-669
Jar of 50
Box of 1,500
Card of 10
Box of 500 89-1211
Card of 4 89-017
Jar of 50 89-044
Card of 4
Jar of 50 89-045
Card of 15 89-048
Jar of 35 89-5048
Card of 15 89-047
Jar of 35 89-5047
Card of 10 89-582
Jar of 35 89-580
Card of 10 89-572
Jar of 35 89-570
92-610
92-619
89-211
89-018
F Mini Card of 10 89-014SM
RCA Mini Card of 10 89-014SMRCA
Compression Port Seals
n Used with compression F-connectors to weatherproof connector
by placing onto the female port
n Made from EPDM for superior sealing
Description Qty. Cat. No.
Short Sleeve Compression F-Connector Port Seals Bag of 100 89-126
Long Sleeve Compression F-Connector Port Seals Bag of 100 89-127
Also available in these kits:
33-635 33-630
Connectors/Port Seals
Long Sleeve
Short Sleeve
33-620
1-800-435-0705 for Customer Service www.idealindustries.com
G-19
Page 20
F-Type Coaxial Connectors
IDEAL
•
•
L
I
F
E
T
I
M
E
G
U
A
R
A
N
T
E
E
F-Series Connectors utilize threaded couplings and cable conductors as contacts for CATV and other UHF applications.
Connector Type Cable Type Termination Type Quantity Cat. No.
Card of 4 84-017
F RG-6 Crimp
F
F
F RG-6 Twist-On
F RG-59 Twist-On
F N/A N/A Card of 10 85-031
RG-6 Quad Crimp
RG-59 Crimp Card of 10
Card of 10 85-037
Card of 50 85-017
Box of 100 86-017
Card of 4 84-030
Card of 10 85-057
Card of 50
Box of 100 86-030
Card of 4 84-016
Card of 50 85-016
Card of 4 84-039
Card of 10 85-053
Card of 50 85-039
Box of 100 86-039
Card of 4 84-018
Card of 10 85-035
85-030
85-036
F N/A N/A Card of 10 85-038
Push-On F-Connectors, RG-6 & RG-59 Push-On F-Connectors, RG-11
n Tool-less design - cuts, strips and pushes on to cable
n All brass nickle-plated construction
n Knurled nut for superior grip
Connectors
n For indoor use
Connector Type Cable Type Qty. Cat. No.
F
F RG-6 Quad Jar of 50 85-166
F RG-59 Jar of 50 85-167
Description
Coax Connector Kit w/Economy Coax Stripper and four
RG-6 Push-on Connectors
RG-6
Card of 4 85-065
Jar of 50
Box of 1,500 85-1165
Card of 4 85-066
Box of 1,500 85-1166
Card of 4 85-067
Box of 1,500 85-1167
85-165
Cat. No.
33-320
n Fits regular RG-11 cable
n Innovative design does not
require a compression or
crimp tool
n Integral pin with center
conductor seizing
mechanism
n Manufactured from solid brass,
nickle-plated for durability
n 9/16 in. hex nut
n Use 45-011 1/4 in. x 1/8 in. Coax Stripper
Description
RG-11 Push-on F-Connector Card of 10 85-111
RG-11 Push-on F-Connector Box of 500 85-0111
Connector Removal Tools
NEW
Qty. Cat. No.
n Works on compression and hex connectors
n New comfort grip handle aids in installing and removing connectors on coax cable
Description Cat. No.
F & BNC Coax Connector Removal Tool - 8 in. 35-046
F & BNC Coax Connector Removal Tool - 12 in. 35-042
F & BNC Coax Connector Removal Tool - 16 in. 35-043
G-20
www.idealindustries.com 1-800-435-0705 for Customer Service
35-043
35-042
35-046
Page 21
DataComm Equipment
BNC Coaxial Connectors
IDEAL coaxial connectors are available in two grades. A premium specification grade features precision machined brass bodies with nickel
plating. The commercial grade consists of machined diecast components with nickel plating. A variety of connectors handle different
termination types, cable size, impedance r
n Connector construction covers both plenum and non-plenum cable jackets
n Captive gold center contacts provide maximum conductivity and minimal resistance
n Nickel plating r
n Meets military specifications. MS39012 and MIL202 where applicable.
n Available in both small and bulk quantities to suit a range of application requirements
esists corrosion, tarnish and ensures signal quality
Connector Cable Center Connector Connector
Type Type Conductor Jacket Impedance Grade Insulation Model Qty. Cat. No.
BNC Plug RG-58 20 AWG Solid Non- 50 Ohm Delrin
ating and attachment means.
Commercial IA-3620 Bag of 5 85-490
Plenum
Specification IA-3621 Bag of 5 85-491
20 AWG Solid
BNC Plug
BNC Plug
BNC Plug
BNC Jack RG-59 22-23 AWG Solid
BNC
Terminator
RG-59
22-23 AWG Solid
RG-6 18 AWG Solid IA-3634 Bag of 5
Belden
8281
—
20 AWG Solid IA-3636 Bag of 5 85-550
——
Non-
Plenum
Plenum IA-3618 Bag of 5 85-512
75 Ohm Commercial
Non-
Plenum
Plenum IA-3626 Bag of 5 85-515
Non-
Plenum
Non-
Plenum
Non-
Plenum
50 Ohm Specification IA-3592 Bag of 5 85-517
75 Ohm
75 Ohm Specification Teflon IA-3638 Bag of 5 85-553
50 Ohm
Specification Delrin
Specification Delrin IA-3641 Bag of 5
Delrin
IA-3617
IA-3624 Bag of 5 85-513
Bag of 5 85-502
Box of 100 86-502
85-545
85-556
Connectors
BNC Tee
Adapter
BNC Adapter
BNC
Twist-on Plug Plenum
— Jack to Plug — 50 Ohm
—
RG-59
Jack to Jack
22-23 AWG Solid
—
Non-
50 Ohm Specification Delrin IA-3668 Bag of 5 85-590
50 Ohm
Commercial Delrin IA-3667 Bag of 5
Commercial Delrin IA-3677
Bag of 5
1-800-435-0705 for Customer Service www.idealindustries.com
85-588
85-480
21
G-
Page 22
Wall Plates/Cables
www.idealindustries.com 1-800-435-0705 for Customer Service
G-22
Wall Plates
Telephone Wall Plates - Standard Size - (2-3/4 in. x 4-1/5 in.)
Description Color Qty. Cat. No.
Ivory
Card of 1 85-206
Box of 100 86-206
RJ-11, 2 Pair
White
Card of 1 85-207
Box of 100 86-207
Almond
Card of 1 85-223
Box of 100 86-223
RJ-11, 2 Pair
Wall Mount Plate
White Box of 100 86-219
CATVCoax White Box of 100 86-201
Combo CATV/RJ-11 White
Card of 1 85-205
Box of 100 86-205
Telephone Wall Plates — Mid-Size (3-1/8 in. x 4-7/8 in.)
Description Color Qty. Cat. No.
RJ-11, 2 Pair White Box of 100 86-237
Combo CATV/RJ11 White Box of 100 86-236
CATV Coax White Box of 100 86-234
Q Customizable bulk cable
Q Bulk CAT5e solid 4-pair, CM R rated, 24 AWG, 35 0 M Hz cable
Q Bulk 2-conductor in-wall, 16 AWG speaker wire
Cables
Description Cat. No.
CAT5e Cable - 100 ft. 85-780
In-wall Speaker Wire - 50 ft. 85-770
85-770
85-780
85-205
85-218
85-220
85-232
85-239
85-237
Telephone Wall Plates are listed and approved by the Underwriter’s
Laboratories and contain 50 micro inches of gold plating on the contacts.
LISTED
Page 23
DataComm Equipment
Insulation Displacement
Connectors (IDC)
IDC connectors create fast splice
and tap connections on solid copper
es. Designed for low voltage
wir
85-900 85-925
telecommunication cables.
n Moistur
e-resistant sealant protects
wires from corrosion
n Use with solid copper single-conductor
85-950
wire
n Kinetic Super™ W
ire Stripper/Crimper
easily cuts and strips 22 to 24 AWG solid wire
Description Qty. Cat. No.
UB-I, 2-Wire Tap Splice IDC 25 85-900
UR-I, 3-Wire Butt Splice IDC 25 85-925
UY-I, 2-Wire Butt Splice IDC 25 85-950
UR-I, 2-Wire Butt Splice IDC 100 86-925
UY-I, 2-Wire Butt Splice IDC 100 86-950
UB-I, 2-Wire Tap Splice IDC 1,000 87-900
UR-I, 3-Wire Butt Splice IDC 1,000 87-925
UY-I, 2-Wire Butt Splice IDC 1,000 87-950
IDC Combo Pack 25 85-960
Kinetic Super™ Wire Stripper/Crimper 1 45-719
CAT 6 Modular Plugs
n Supports CAT 6
n Unique three-piece design provides
easy installation and optimal performance
n Crimps with a standard RJ-45 crimp die
on gold contacts, 8-position, 8-contact
0 micr
n 5
n Suitable for solid or stranded conductors
Description
T 6 Modular Plugs
CA
Qty
25
.
Cat. No.
85-366
Modular Plugs
85-344
85-346
n All plugs comply with FCC 86 guidelines and are UL Listed
n Plugs ar
n Plugs offered for round cable with solid conductors and
n Position and contact configurations cover popular styles
Description Qty. Cat. No.
6-Position 4-Contact Flat Stranded 50 85-401
6-Position 6-Contact Flat Stranded 50 85-402
4-Position 4-Contact Flat Stranded (Handset) 100 86-398
8-Position 8-Contact Flat Stranded 50 85-403
6-Position 4-Contact Round Solid 50 85-394
6-Position 6-Contact Round Solid 100 86-395
8-Position 8-Contact CAT 6 Modular Plug 25 85-366
8-Position 8-Contact Round Solid
e capable of supporting the latest EIA/TIA cable system
performance categories when installed in compliance with
appropriate EIA/TIA standards and methods
for flat cable and stranded conductors
25 85-351
100 86-401
25 85-352
100 86-402
25 85-353
100 86-403
25 85-344
100 86-394
25 85-346
50
100 86-396
85-396
Also available in these kits:
33-750 33-704 33-652
1-800-435-0705 for Customer Service www.idealindustries.com
G-
Connectors/Modular Plugs
23
Page 24
Economy Data and CATV Kit - 33-915
Kit Includes:
• 30-496 Telemaster™ Telephone Tool
• 30-633 Economy Compression Tool
• 35-492 Non-Impact Turn-Lock™ Tool w/110 Blade
• 35-535 Mechanics Bag
• 45-074 Data T®-Cutter
• 45-167 Economy UTP Stripper
• 45-320 Economy Coax Stripper
Basic Data and Video Kit - 33-916
Kit Includes:
• 30-793 OmniSeal™ Pro XL Compression Tool
• 33-856 VDV Multimedia Cable Tester
•
35-462 Journeyman Electrician’s Tote™
• 35-485 Punchmaster™ II Punch Down Tool w/110 Blade
45-074 Data T®-Cutter
•
•
45-165 UTP Stripper
45-262 Stripmaster®Wire Stripper for RG-6
•
• 62-140 TRACETone™ Tone Generator & Amplifier Probe
Data/Video Kit - 33-917
Kit Includes:
• 30-522 Crimpmaster™ Crimp Tool for RJ-45 Modular Plugs
30-793 OmniSeal™ Pro XL Compression Tool
•
•
33-856 VDV MultiMedia Cable Tester
35-046 Coax Connector Tool - F & BNC
•
Kits
• 35-088 Electrician’
•
35-407 110/66 Blade Combo Punch Down Blade
35-410 Large Mouth Bag — 13 in.
•
• 35-473 Probe Pic and Spudger
• 35-485 Punchmaster™ II Punch Down Tool w/110 Blade
• 35-908 Twist-a-Nut™ 7-in-1 Screwdriver
• 45-074 Data T®-Cutter
• 45-165 UTP Stripper
• 45-526 Coax Stripper w/Replaceable Cartridge
• 62-164 Amplifier Probe
s Scissors w/Stripping Notch
Economy CATV Compression Kit - 33-621
Kit Includes:
• 30-633 Economy Compression T
•
35-402 Zipper Pouch
45-074 Data T®-Cutter
•
• 45-320 Economy Coax Stripper
• 92-654 RG-6, RG-6 Quad Compression F-Connectors, qty
ool
. 4
G-24
www.idealindustries.com 1-800-435-0705 for Customer Service
Page 25
Kits
DataComm Equipment
1-800-435-0705 for Customer Service www.idealindustries.com
G-25
Residential Compression Kit - 33-625
Economy Compression Kit - 33-620
Kit Includes:
• 30-603 OmniSeal™ Pro Compression Tool
• 35-535 Mechanic’s Tool Bag
• 45-074 Data T®-Cutter
• 45-262 Coax Stripmaster®Wire Stripper for RG-6
• 92-650 RG-6 RTQ Compression Connector, 50/jar
• LA-3953 Stripmaster®RG-6 QuadShield Repl. Blade
Kit Includes:
• 30-633 Economy Tool
• 45-074 Data T®-Cutter
• 45-526 Coax Stripper
• 92-610 RG-59 RTQ Compression Connectors, 50/jar
• 92-650 RG-6 RTQ Compression Connector, 50/jar
Kit Includes:
• 30-793 OmniSeal™ Pro XL Compression Tool
• 45-074 Data T®-Cutter
• 45-262 Coax Stripmaster®Wire Stripper for RG-6
• 89-026 Compression F-Connector Port Seals, qty. 5
• 89-057 BNC RG-6 Compression Connectors, qty. 10
• 89-058 BNC RG-59Compression Connectors, qty. 10
• 92-650 RG-6 RTQ Compression Connector, 50/jar
• 92-660 RG-6 Plenum Compression Connector, 50/jar
• LA-3953 Replacement Blade for 45-262
Service Compression Kit - 33-630
Kit Includes:
• 30-496 Telemaster™ for RJ-11/RJ-45 Plugs
• 85-351 4-Position, RJ-11 Stranded Modular Plugs, qty. 15
• 85-352 6-Position, RJ-11 Stranded Modular Plugs, qty. 15
• 85-353 8-Position, RJ-45 Stranded Modular Plugs, qty. 15
RJ-45/11 Four, Six and Eight-Position
Combination TelCom Termination Kit - 33-704
Page 26
Economy 10Base-T Kit - 33-750
Kit Includes:
• 30-496 Telemaster™ RJ-11/RJ-45 Crimp Tool
• 45-165 UTP/Coax Stripper
• 85-346 8-Position RJ-45 Non-keyed Solid Plugs, qty. 50
Crimpmaster™ 10Base-T RJ-45
Crimping Kit - 33-652
Kit Includes:
• 30-506 Crimpmaster™ Crimp T
• 30-559 8-Position Die Set for RJ-45 Plugs
• 45-074 Data T®-Cutter
• 45-165 UTP/Coax Stripper
• 86-396 8-Position RJ-45 Non-Keyed Solid Plugs, qty. 200
ool Frame only
RG-6 Push-on Connector Kit - 33-320
Kit Includes:
• 45-320 2-Step 59 & 6 Series Stripper
• 85-065 RG-6 Push-On Connectors, qty. 4
Kits
Compression Connector Installation Kit - 33-623
Kit Includes:
• 45-074 Data T®-Cutter
•
45-320 Coax Cable Stripper
45-633 Economy Compression Tool
•
Pouch w/belt clip
•
G-26
www.idealindustries.com 1-800-435-0705 for Customer Service
Page 27
Cable Service Kit - 33-605
Kit Includes:
• 35-088 Electrician’s Scissors w/Stripping Notches
• 35-462 Journeyman’s Electrician’s Tote™
• 35-473 Probe Pic & Spudger
• 35-485 Punchmaster™ Punch Down Tool w/110 Blade
• 35-497 66 Blade Only
• 35-905 5-in-1 Screwdriver
• 45-165 UTP/STP Stripper
•
62-160 Tone Generator
62-164 Amplifier Probe
•
Deluxe Cable Service Kit - 33-705
Kit Includes:
• 30-496 T
• 35-088 Electrician’s Scissors w/Stripping Notches
• 35-462 Journeyman’s Electrician’s Tote™
• 35-473 Probe Pic & Spudger
• 35-485 Punchmaster™ Punch Down Tool w/110 Blade
• 35-497 66 Blade Only
• 35-905 5-in-1 Screwdriver
• 45-165 UTP/STP Stripper
• 62-160 Tone Generator
• 62-164 Amplifier Probe
• 62-200 LinkMaster™ Tester and Remote
elemaster™ Telephone Tool
DataComm Equipment
Technician’s Service Kit - 33-505
Kit Includes:
• 35-088 Electrician’s Scissors w/Stripping Notches
• 35-473 Probe Pic & Spudger
• 35-485 Punchmaster™ Punch Down T
• 35-497 66 Blade Only
• 35-908 7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver
• 45-165 UTP/STP Stripper
• 62-205 Nylon case
ool w/110 Blade
Crimpmaster™ F-Type (CATV)
Connectors Kit - 33-400
Kit Includes:
• 30-503 Crimpmaster™ CATV Crimp Tool
• 85-016 F-Connector, Crimp-on RG-59 Plugs, qty. 20
• 85-017 F-Connector, Crimp-on RG-6 Plugs, qty. 20
Kits
1-800-435-0705 for Customer Service www.idealindustries.com
G-
27
Page 28
Pro Installer Kit - 33-945
Kit Includes:
• 30-427 Large Mouth Bag – 18 in.
• 30-603 OmniSeal™ Compression Tool
• 30-696 Ratchet Telemaster™
• 35-046 F-Connector Tool
• 35-087 Lever™-Snips Electrician’s Scissors
• 35-091 Cable Splicing Knife
• 35-205 Torpedo Level
• 35-238 Mag-Tape™ Tape Measure
• 35-275 Jab Saw
• 35-407 110/66 Blade
• 35-420 Tongue & Groove Pliers – 9-1/2 in.
• 35-473 Probe Pic and Spudger
• 35-485 Punchmaster™ II 110 Blade only
• 35-497 66 Blade only
• 35-908 7-in-1 Twist-a-Nut™
• 35-3037 Smart-Grip™ Long-Nose Pliers –
• 35-3430 Smart-Grip™ Tongue & Groove
• 45-074 Data T®-Cutter
• 45-165 UTP/STP Stripper
• 45-526 Coax Stripper - 2-Step
•
•
Screwdriver/Nutdriver
7-3/4 in.
Pliers – 10 in.
62-160 Tone Generator
62-164 Amplifier Probe
Coax Termination Hip Kit - 33-624
Kit Includes:
• 30-793 OmniSeal™ Pro XL Compression Tool
45-074 Data T®-Cutter
•
• 45-603 Coax/UTP Cable Stripper
• 92-651 Compression F-Connector, RG-6,10/card
RCA Compression Connector Kit - 33-635
Kit Includes:
• 30-793 OmniSeal™ Pro XL
• 45-074 Data T®-Cutter
• 45-603 Coax/UTP
Kits
• 89-044 OmniCONN™ RG-6 Compression Connectors
• 89-572 OmniCONN™ RCA RG-59 Compression Connectors
• 89-582 OmniCONN™ RCA RG-6 Compression Connectors
Compression T
Cable Stripper
ool
Telemaster™ Crimp Kit - 33-700
Kit Includes:
• 30-496 T
• 85-346 RJ-45 8P8C, qty. 10
• 86-395 RJ-11 6P6C, qty
• 85-344 RJ-11 6P4C, qty. 10
elemaster T
ool for RJ-11 (1, 2, 3 pair) and RJ-45 Plugs
. 10
NEW
NEW
G-28
www.idealindustries.com 1-800-435-0705 for Customer Service
Page 29
DataComm Equipment
Coaxial Selection Chart
Compression Style
Cable Cutter Stripper Compression Tool Compression Connector Tester
TV/SATV/F-type
CA
RG-59
Reg/Tri/Quad
RG-6
Reg/Tri/Quad 92-656, 92-659
45-074, 45-075 45-265, 45-603, 45-526 30-603, 30-793, 30-633 92-610, 92-619
45-074, 45-075 45-262, 45-603, 45-526 30-603, 30-793, 30-633
92-654, 92-651, 92-650,
RG-6 Plenum 45-074, 45-075 45-282, 45-603, 45-526 30-603, 30-793, 30-633 92-660, 92-669
RG-11 45-074, 45-075 45-111, 45-510 30-603, 30-793 89-211, 89-1211
Minis 45-074, 45-075 45-529, 45-163 30-603, 30-793 89-014SM, 89-014SMRCA
BNC
RG-59 45-074, 45-075 45-265, 45-603, 45-526 30-793 89-047, 89-5047
RG-6 45-074, 45-075 45-265, 45-603, 45-526 30-793 89-048, 89-5048
*Need LA-4173 adapter.
Crimp Style
Cable
CATV/SATV/F-Type
RG-59 45-074, 45-075 45-265, 45-603, 45-320 30-503 85-036, 85-016, 86-016
RG-6
Cutter
45-074, 45-075
Stripper
45-262, 45-603, 45-320
Crimping Tool Connector Tester
30-503
85-037, 85-017, 86-017
33-856, 33-880
33-881, 33-887*
Coaxial Selection Chart
RG-6 Quad Shield 45-074, 45-075 45-282, 45-603, 45-320 30-503 85-057, 85-030, 86-030
RG-6 Plenum 45-074, 45-075 45-282, 45-603 30-503 N/A
RG-11
BNC
RG-59, Non-Plenum 45-074, 45-075 45-520 30-502, 30-483 85-513, 85-517, 85-502
RG-6 Non-Plenum 45-074, 45-075 45-520 30-483 85-545
*Need LA-4173 adapter.
45-074, 45-075
45-164, 45-510, 45-111
30-482 N/A
33-856, 33-880
33-881, 33-887*
1-800-435-0705 for Customer Service www.idealindustries.com
G-
29
Page 30
FiberMASTER™ Fiber Optic Test Kit
Measure fiber optic power in milliwatts (mW) and decibel-milliwatts
(dBm) to test and tr
loss with the automatic calibration feature that stores reference power
from any light source for quick dB loss calculations. Plus, the 1490nm
wavelength measurement mode is perfect for troubleshooting
emerging Fiber-To-The-Home cabling systems.
n Fiber Optic Power Meter & Light Source — Four wavelength
power meter for multimode and single mode testing, and 850nm
multimode LED light source.
n Calibration Function — Stores reference power level for quick
dB loss measurements eliminating the need to manually calculate
loss.
n Save Time and Money — Power meter features 2.5mm
universal and FC adapters, light source includes ST
adapters to test the most common interfaces.
n Ready for FTTx — 1490nm measurement wavelength for use
with nearly all single mode Fiber-To-The-Home applications.
n Designed for the Field — Unique “docking” light source and
easy three-button operation make this the perfect fiber tester for
use in the field.
FiberMASTER Kit Includes:
• 33-926 Light source, 850nm LED with ST®, SC and FC adapters
• 33-927 Power meter, 4 wavelength with universal 2.5mm and
fixed FC adapter
• 2x FC-SC 62.5um multimode cables
• 1 SC calbration coupler
• Carrying case
• English, Spanish, German, French, Portuguese, Italian and Chinese
Fiber Optic Tester
user’s manual
Power Meter Specifications
Wavelength 850, 1300/1310, 1490, 1550nm
Detector InGaAs
Measurement Range -60 to +3dBm
Accuracy ±5%
Display Resolution .01
Connector Universal 2.5mm w/FC adapter
ower Supply AAA Alkaline Battery x 3
P
Operating Time 360 hours
Operating Temp -10 to +60°C
age Temp -25 to +70°C
Stor
Light Sour
Wavelength 850nm LED
Output P
ower
Stability
Connector 2.5mm w/ST
ower Supply
P
ime 40 hours
ating T
Oper
Operating Temp -10 to +60°C
emp
age T
Stor
oubleshoot active LANs. Quickly measure cabling
ce Specifications
-6 to -7 dBm T
.05dB after 15min, 0.1dB ov
A Alkaline Battery x 3
A
A
-25 to +7
ypical
®
, SC, FC adapters
C
°
0
®
, SC and FC
er 8 hrs
Description Cat. No.
Kit with integrated remote and accessories 33-928
Note: ST®is a registered trademark of AT&T.
G-30
www.idealindustries.com 1-800-435-0705 for Customer Service
Page 31
DataComm Equipment
Fiber Inspection Microscope
n 100X magnification for viewing multimode connectors
n Includes 2.5mm connector “Universal Adapter” for FC, ST
®
and SC style connectors
n Oblique illumination pr
n Rugged, rubberized metal housing, precision glass optics and a
and cor
e condition
ovides excellent view of ferrule cleanliness
built-in laser safety filter
n White LED illumination delivers 100,000 hours bulb life
n Soft padded carrying case included
n Battery lif
n Compact size 7.5 in. x 1.96 in. x 1.18 in.
n Optional 200X Conversion Eyepiece threads on for viewing finish/
polish of singlemode connectors
Description Cat. No.
Fiber Inspection Microscope 45-332
1.25mm Connector Adapter 45-334
MTRJ-Style Connector Adapter 45-335
200X Conversion Eyepiece for Singlemode Connectors 45-336
Note: ST®is a registered trademark of AT&T.
e 48+ hours
D
VFF Visual Fault Finder
Laser light source used to locate breaks, faulty
splices and crimps
n NEW 2.5mm Universal Adapter for all
ST®, SC and FC connectors
n Useful over a distance of 5km (3 miles)
A batteries pr
wo A
n T
of continuous use
n Slim, pocket-sized tool in rugged
metal housing
n Nylon carrying case with belt
loop included
Description Cat. No.
Visual Fault Finder VFF5
Note: ST®is a registered trademark of A
ovide over 30 hours
.
T&T
Serrated Cutter (For Kevlar®)
with Breaker Notch
n Two-Step process significantly
increases the life of this rugged tool
n Superior quality high-carbon stainless steel with molybdenum and
vanadium provides the super-hard edges needed to stand up to
the demands of today’s market
n Textured cushioned-grip handles
n Value-priced for contractors, cable assembly houses, fiber
installers/technicians and tool kits
Description Cat. No.
Serrated Cutter w/Breaker Notch (Patent pending) 45-344
Note: Kevlar®is a registered trademark of DuPont.
DualScribe™ Double-Ended
Fiber Optic Scribes
n Three professional quality blade styles
to choose from to meet your specific
needs – Ruby, Sapphire, Carbide
n Color-coded handles for quick,
45-358
easy identification
Red – Ruby
Blue – Sapphire
Black – Carbide
n 30° single bevel – DualScribe™
reversible blade doubles tool life
n Soft non-slip grip pr
n Clear safety cap protects the blades from
ol during scribing
contr
ovides precise
45-359
45-357
damage when not in use
Description
Ruby Blade Fiber Optic Scribe
Sapphire Blade Fiber Optic Scribe
Carbide Blade Fiber Optic Scribe
Handle Color
Red
Blue
Black
Cat. No.
45-357
45-358
45-359
MiniLite-Strip™
Optical Fiber Stripper
n Small strip notch
engineered and
precision-ground to
strip 900 micron or
250 micron buffer coatings
from 125 micron fiber
n Larger round strip notch machined to remove the 3mm outer jacket
n Strip notches pre-set and locked, no field adjustment necessary
Fiber Optic Tools
Description
MiniLite-Strip™ Optical Fiber Stripper 45-352
1-800-435-0705 for Customer Service www.idealindustries.com
Cat. No.
G-
31
Page 32
Lite-Strip™
Optical Fiber Stripper
Plastic Polishing
Fixture
-notch blades strip a wide range of
V
outer cable jacket. Precision-ground,
replaceable knife-type blades strip
tight buff
er tube insulations
(900µm). Also strips
mechanically strippable
coatings fr
om 250
microns to 900
microns.
n Replaceable precision-ground blades cleanly strip buffer
coatings
n New funneled hole makes cable insertion easier
n Improved spring mounting returns handles to original position
after every application
n One-step, 900 micron stripping hole provides broader
stripping range
n Extra durable to withstand normal drops without requiring
tool realignment
n New gauge color makes fiber and hole identification easier
n Improved comfort-grip handles for an easier, more comfortable
stripping process
Description Fiber Sizes Cat. No.
Lite-Strip™Optical Fiber Stripper (900µm/250µm) 125µm, 140µm 45-350
Stripmaster®Ribbon Fiber
Jacket Stripper
n Removes jacket from Ribbon Fiber without
Fiber Optic Tools
damage to the Kevlar®strength member of
the Ribbon Fiber
Note: Frame and blade-set sold separately.
Description Cat. No.
Stripmaster®Wire Stripper Frame only L-5620
Blade-set for use with Corning Plenum and Riser Ribbon Fiber Cable LB-1152
Blade-set for use with Corning “Fanout” Ribbon Cable LB-1153
Note: Kevlar®is a registered trademark of DuPont.
Split-Tip Fiber Optic Swabs
n Split-tip design cleans fiber easier
and more efficiently than other
methods
n Tube/handle is pre-loaded
with 99% isopropyl alcohol
n A single swab can be used
for many cleanings or until the
alcohol is gone
n Universal fitting accepts all ST
®
, SC
and FC connectors with 2.5mm
ferrules
n Economically priced
n Grooved face for polishing efficiency
n Precision tool used by manufacturers, contractors and
Description Cat. No.
Plastic Polishing Fixture 45-342
Note: ST®is a registered trademark of AT&T.
in tool kits
Stainless Steel Polishing Fixture for
®
Optical Fiber ST
and
SC Type Connectors
Produces polished fiber optic ST®and
SC type connectors for optimum
connector performance.
n Precision-machined, stainless-steel
disk provides accurate polishing angle
for desired end face finish
n Stainless-steel hardness maintains long life and resists
uneven wear
n Stepped surface reduces drag and friction for easier polishing
Description Qty. Cat. No.
Polishing Fixture for Optical Fiber
SC/ST®Type Connectors
Note: ST®is a registered trademark of AT&T.
1 45-341
Polishing Films for Fiber
Optic Connectors
45-338
n For optimum connector
45-339
polishing results, we
recommend a three-step
procedure using 0.5µm,
3µm and 12µm 3 in. x 6 in.
aluminum oxide polishing
films
ot-to-lot consistenc
n L
films means r
finishes on cer
plastic and composite f
n A single sheet will typically yield 10 to 20 connectors when using
y in our
epeatable connector
amic, stainless steel,
errules
the recommended 3-step procedure
Description Color Qty. Cat. No.
0.5µm, 3” x 6”, Aluminum Oxide Ivory 20 films/sleeve 45-337
3.0µm, 3” x 6”, Aluminum Oxide Lt. Yellow 20 films/sleeve 45-338
12µm, 3” x 6”, Aluminum Oxide Lt. Red 20 films/sleeve 45-339
45-337
Description
Split-Tip Fiber Optic Swabs
G-32
www.idealindustries.com 1-800-435-0705 for Customer Service
.
Qty
Bag of 20
Cat. No.
45-360
Loading...