DataComm 70-0034, 70-0036, 70-0038 Installation Manual

DataComm Electronics, Inc.

www.datacommelectronics.com

ETL LISTED

6349 Peachtree St.
Norcross, GA 30071-1725

888.223.7977

770.662.8205

Instruction / Installation Sheet

DataComm Electronics Bracket-Mounted 2 GHz Splitters

70-0034 / 70-0036 / 70-0038

Video

 Attach a female F-connector onto the cable TV service or satellite

service incoming cable.

 Screw the incoming cable with F-connector on the splitter F-connector

marked “input”.

 Using F-connectors, terminate all coaxial leads that have been pulled

through the enclosure opening to the video splitter.

 Screw these coaxial leads on the splitter F-connectors marked

“output”.

 Align the four mounting pins with holes in the back of the panel (upper

most position recommended) and snap into place.

ONLY LICENSED PROFESSIONALS SHOULD INSTALL THIS PRODUCT

3026001

CONFORMS TO

UL STD 1863

ANSI/UL STD 60950-1

CERTIFIED TO

CAN/CSA STD C22.2 NO 60950-1

3/31/08 Rev. 1 WEB