DataComm Electronics’ Full-Size
Rough-In Bracket is designed for use in
new construction applications. The
Rough-In Bracket allows for pre-wiring
with many of DataComm’s Low Voltage
and Power Cable Plates. It works well
for both residential and commercial
applications.
Full-Size Rough-In Bracket
for New Construction 45-0102
Features
• Sturdy 22GA Galvanized Steel Construction
• Designed to be installed onto standard 16 inch on center metal
or wood studs
• Steel Outlet Box* included:
2 ¾” Single Gang
Contains 8 knockouts for conduit or armored cable
mounting options
• Built-in mud ring for drywall
• Works well for both residential (15A) and commercial (20A)
applications
• Reversible for receptacle placement on left or right side
• Low profile design fits behind the industry’s thinnest mounts,
TV’s and other wall mounted displays
• Conceal multiple A/V cables behind your HDTV or other
display unit
• Quick and easy to install
Part Number Description Min. Order/Master Ctn.
45-0102 Full-Size Rough-In Bracket 4/4
Final Installation with Compatible Wall Plate (Part# 45-0032-WH)
COMPATIBLE WALL PLATES
Use the Full-Size Rough-In Bracket in conjunction with the
Recessed Low Voltage Media Plate:
with Duplex Receptacle, Part #45-0031-WH
with Duplex Surge Suppressor, Part # 45-0041-WH
with 20 Amp Duplex Receptacle, Part #45-0032-WH
RoHS Compliant. *UL Listed Component.
And the Expandable Media Box:
with Duplex Receptacle, Part #45-0051-WH
with Duplex Surge Suppressor, Part # 45-0061-WH
with 20 Amp Duplex Receptacle, Part #45-0052-WH