DataComm 45-0054-WH, 45-0063-WH Specsheet

Recessed Media Box II

45-0053-WH, 45-0063-WH, 45-0054-WH

DataComm Electronics’ Recessed Media Box II is designed to streamline power and cable management behind your HDTV. The

box features a side cover plate with knockouts for conduit or tube. This is the ideal solution for allowing your TV or other display

to be mounted ﬂush to the wall. This box is available in surge and 20 commercial grade models.

Features

Part # 45-0053-WH | ETL US Only

• Side cover plate features 1” and 2” knockouts for conduit or tube

• There are two openings inside of the Recessed Media Box, one on the

top and one on the bottom. Three (3) interchangeable plates are

included to cover these openings, allowing for multiple conﬁguration

options. The three (3) plates include:

› Flexible Opening Plate

› 6-Port Keystone Plate

› Blank Plate

• UL Listed,15 Amp/125 Volt Duplex Receptacle

• Outlet box included

• Metal mounting wings are attached to the media plate and fasten

tightly against the back of the drywall when installed

• Available in three (3) models

• Quick and easy to install

• Rough-in ready when used with DataComm’s Full-Size Rough-In

Bracket (P/N: 45-0102)

Part # 45-0063-WH | Surge Suppressor Features

UL Listed 15 Amp/125 Volt Duplex Surge Receptacle:

• Maximum surge current - 15,000 amps

• Clamping response time - 1 nanosecond

• Hot/Neutral, Hot/Ground, Neutral/Ground

• Total maximum surge dissipation - 480 joules

| ETL US Only

Part Number

45-0053-WH

45-0063-WH

45-0054-WH

Patent Pending

Description

w/ 15 Amp/125 Volt Duplex Receptacle

w/ 15 Amp/125 Volt Surge Suppressor

w/ 20 Amp/125 Volt Duplex Receptacle

Part # 45-0054-WH | 20 Amp Model w/ Steel Outlet Box Features ETL US & CAN

UL Listed 20 Amp/125 Volt Duplex Receptacle:

• 2 pole

• 3W

• Rear connection with side screw terminals

• Tamper resistant

DataComm Electronics, Inc.

www.datacommelectronics.com