DataBay ET-HK0101-TC, ET-HK0101-RC User Manual

ET-HK0101-TC
ET-HK0101-RC

User Manual

◄ V1.0 ►

www.databay.com.tw

www.green-box.com.tw

HDMI over Single CAT-5
Extender Kit with IR

2 / 10

Safety and Notice

The ET-HK0101-MC HDMI 1.3 over Single CAT5 Extender has been tested for
conformity to safety regulations and requirements, and has been certified for international
use. However, like all electronic equipments, the ET-HK0101-TC should be used with care.
Please read and follow the safety instructions to protect yourself from possible injury and
to minimize the risk of damage to the unit.

z Follow all instructions and warnings marked on this unit.
z Do not attempt to service this unit yourself, except where explained in this manual.
z Provide proper ventilation and air circulation and do not use near water.
z Keep objects that might damage the device and assure that the placement of this unit

is on a stable surface.

z Use only the power adapter and power cords and connection cables designed for this

unit.

z Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the

device before cleaning.

3 / 10

Introduction

The ET-HK0101-MC HDMI 1.3 over Single CAT5 Extender boosts up your
video/audio transmission distance up to 60m (200ft) in HDTV 1080i format, 40m (130ft) in
HDTV 1080p format, and 20m (65ft) in HDTV 1080p with 36 bit color depth. With only one
cost effective LAN cable, users can readily extend HDTV sources from DVD players,
Blu-ray Disc player, PS3, PC, and any other kinds of sources compliant with TMDS to
distant display monitors including HDMI/DVI enabled TV sets or LCD PC monitors. With
the state-of-the-art Silicon Image chipsets equipped, deep color video, DTS-HD or Dolby
TrueHD audio, and HDCP supports and compatibility are all further insured. This flexibility
makes HDCP compliant DVD players or PS3 transmit utmost high quality video and audio
with a greater distance at the minimal cost, when integrating several components apart.

The ET-HK0101-MC includes two units: transmitting (ET-HK0101-TC) and receiving
(ET-HK0101-TC) units. The transmitting unit is used to capture the input HDMI/DVI signals
and carry the signals through one RJ-45 connector into one cost effective CAT-5/5e/6 LAN
cable. The receiving unit is responsible for equalizing the sent TMDS multimedia data. The
transmission distance between the sending and receiving units can be up to 60m (200ft)
under HD (720p/1080i) or 40m (130ft) under Full HD (1080p). With an 8-level equalization
control knob on the receiving unit, users can adjust the equalization strength to the
received TMDS signals accordingly, and therefore optimize the transmission distance
between source and destination.

Introduction

ET-HK0101-TC

ET-HK0101-RC