Data DLI 7200 Product Manual
Rev. 3
2
Disclaimer
Data Ltd., Inc. (DLI) reserves the right to make changes in specifications and other information
contained in this document without prior notice, and the reader should in all cases consult DLI
to determine whether any such changes have been made. The information in this publication
does not represent a commitment on the part of DLI.
DLI shall not be liable for technical or editorial errors or omissions contained herein: nor for
incidental or consequential damages resulting from the furnishing performance, or use of
this material.
This document contains proprietary information that is protected by copyright. All rights are
reserved. No part of this document may be photocopied, reproduced, or translated into another
language without the prior written consent of DLI.
© 2013 Data Ltd., Inc. All rights reserved.
Web Address: www.dataltd.com
Trademarks
DLI 7200 is a trademark or registered trademark of Data Ltd., Inc.
Windows and the Windows logos are trademarks or registered trademarks of Microsoft
Corporation.
Android OS and the Android Logo are trademarks or registered trademarks of Open Handset
Alliance and Google.
The Bluetooth trademarks are owned by Bluetooth SIG, Inc., USA and licensed to DLI.
Other product names mentioned in this manual may be trademarks or registered trademarks
of their respective companies and are hereby acknowledged.
DLI 7200 Product Manual Rev. 3
3
Table of Contents
Thank You! ...................................................................................................................................... 4
DLI 7200 Peripherals and Accessories ........................................................................................... 4
Hardware Overview ......................................................................................................................... 5
Setting Up the DLI 7200 Terminal ................................................................................................... 9
Unpack the Carton and Verify its Contents ..................................................................................... 9
Battery Status LED ........................................................................................................................ 10
Charging the Battery in the DLI 7200 ............................................................................................ 10
Power Management Utility ............................................................................................................. 11
Optional Auto Power On & Off Setup ............................................................................................ 11
Adjusting the Backlight .................................................................................................................. 12
Using the Stylus ............................................................................................................................. 13
Using the Programmable Keys ...................................................................................................... 15
Using the WiFi Radio ..................................................................................................................... 18
Using the Bluetooth Radio ............................................................................................................. 21
Using the Barcode Scanner ........................................................................................................... 25
3-in-1 Demo Software .................................................................................................................... 26
SAM Card Installation .................................................................................................................... 30
SIM Card Insertion ......................................................................................................................... 31
Using the GPS ............................................................................................................................... 32
DLI 7200 Desktop Cradle .............................................................................................................. 34
Technical Assistance ..................................................................................................................... 37
Product Service and Repair ........................................................................................................... 37
Shipping your DLI Device .............................................................................................................. 38
Limited Warranty............................................................................................................................ 40
Regulatory and Safety Approvals .................................................................................................. 41
FCC Compliance ........................................................................................................................... 43
DLI 7200 Product Manual Rev. 3
4
Thank You!
Data Ltd Inc. would like to thank you for selecting the DLI 7200. The DLI 7200 was designed as
a forward thinking product that is modular in design and upgradeable. We thank you, the
customer, for giving us the inspiration for the following features:
•
Impact Resistant Case
•
Optional Integrated 2-in-1 Module (magstripe, contactless payment (NFC) / RFID)
•
Integrated 1D/2D Imager
•
Integrated four radio technology (WiFi, Bluetooth, GPS, and Cellular)
•
Industrial-rated touchscreen
•
Optional Integrated 2MP Back Camera
•
Boot media via SSD (Solid State Drive)
DLI 7200 Peripherals and Accessories
3800139 Replacement Stylus
4100019 Replacement Handstrap (set of 2)
4100021 Screen Protector
7700138 Replacement 7200 Charger Cup
5400007 Desktop AC Wall Adapter with (US) Power Cord
For country specific power cords please contact your sales representative.
DLI 7200 Product Manual Rev. 3
5
Impact Resistant
Case
Programmable Keyboard
LCD with Touch Screen
Two Programmable
Buttons
Programmable
Button
Power Button
Ambient Light Sensor
Microphone
Hardware Overview
Front Panel
DLI 7200 Product Manual Rev. 3
6
Indicator LED
Status
Description
Imager
Solid Red
Imager On
Flash Green
Good Read
Bluetooth
Blinking Blue
Enabled
No Light
Disabled or Not Available
Power
Refer to Battery Status LED
section. Page 10
Tether Loop
Charger Cup /
Cradle Interface
Bluetooth
Power
Imager
Magstripe Reader
Part Number
7200B
1D/2D Imager
Hand Strap
Connector
Front Panel Status Indicator LEDs
The front panel includes three status indicator LEDs, Imager, Bluetooth and Power / Charge status.
Top Panel
Bottom Panel
DLI 7200 Product Manual Rev. 3
7
Programmable
Button
Left Side
Right Side
Two
Programmable
Buttons
Mini
USB
Headphone Jack
Side Panels w/ Optional 2-in-1 Module
DLI 7200 Product Manual Rev. 3
8
2-in-1
RFID / NFC
& MSR
Part Number 7200A
2MP Camera
w/ Flash
Hot-swappable
Battery Pack
(In Stand-by Mode ONLY)
Hot-swappable
Battery Pack
(In Stand-by Mode ONLY)
Part Number 7200B
Back Panel
DLI 7200 Product Manual Rev. 3
9
Setting Up the DLI 7200 Terminal
1. Unpack the carton and verify its contents. – See Below
3. Charge the main battery for two hours.
4. Power on the terminal via the power button on the top of the terminal.
5. Let the device load and end on the Desktop screen.
Default BIOS password is qwerty
Unpack the Carton and Verify its Contents
Verify that the carton contains the following items:
•
DLI 7200 Rugged Mobile Tablet
•
Quick Reference Welcome Guide
If you ordered peripherals and/or accessories, verify that they are also included
with the order.
Be sure to keep the original packaging in case the DLI 7200 needs to be returned for
service– See page 38.
DLI 7200 Product Manual Rev. 3
10
Battery Indicator Light
Status
Description
Power
Solid Green
Powered On
Battery
Solid Green
Capacity level = 100%
Blinking Green
Capacity level > 70%
Blinking Yellow
Capacity level > 20% - < 70%
Blinking Red
Capacity level < 20%
Battery Indicator Light
Status
Description
Power
Solid Green
Powered On
Battery
Solid Green
Capacity level > 70%
Solid Yellow
Capacity level < 70% - > 20%
Solid Red
Capacity level < 20% - > 10%
Blinking Red
Capacity level < 10%
Battery Status LED
On Power Source (Charger)
Off Power Source (No Charger)
Push Button Battery Life Status
All DLI 7200 batteries have a Battery Life Status. Push the battery
symbol and LEDs show the life status. Each LED is ~25%
For charging, use only DLI 7200 peripherals and the power cables. Use of
peripherals or cables not sold/manufactured by Data Ltd will void the warranty
and may damage the terminal.
Charging the Battery in the DLI 7200
1. Connect the DLI 7200 to the power su pply provided by Data Ltd.
2. The battery will begin charging immediately.
3. Charge the battery for two hours, then power on the terminal.
Due to the nature of Lithium Ion, be sure to periodically charge your
batteries, as months of inactivity can have a long-term negative effect on
the life of the battery.
The battery will charge even if the terminal is in use as long as AC is applied to
the terminal.
DLI 7200 Product Manual Rev. 3
11
Power Management Utility
The DLI 7200 includes a comprehensive suite of power management functions. The power
management is based upon the ACPI Standard (Advanced Configuration and Power
Interface Specification) and is operated within the Embedded Controller (EC) at low level
management. The Power Management Utility is accessible in the Control Panel.
Optional Auto Power On & Off Setup
Your device can be set to power on when external power is detected via the BIOS, and powered
off at a certain battery percentage via the Operating System.
To enable the Auto Power On feature please contact DLI Technical Support, 800.526.1299 x774.
To enable the Auto Power Off feature based on battery percentage:
Tap Start>Control Panel>Power Options.
Select Change Plan Settings under the current Power Plan. This will bring up the Sleep and
Display settings (shown above on the left). Now select Change Advanced Power Settings
(shown above on the right).
(Continued on page 12.)
DLI 7200 Product Manual Rev. 3
12
Select Battery to expand the options (shown below).
Select Low battery level and give the On battery a percentage. 50% is what is shown; this
number can be changed to better fit the needed requirements.
After selecting a low battery level, now select a Low battery action. Select Shut down for On
Battery. Select Apply and OK.
Once external power is removed (i.e. a forklift or a vehicle is turned off) the device will run off the
internal battery until it reaches the Low battery level set above and perform the set action.
Adjusting the Backlight
Brightness levels of the liquid crystal display (LCD) are adjustable based on the lighting conditions
by using the Windows Screen Brightness Bar. The DLI 7200 has a built-in Ambient Light Sensor
which will auto dim or increase brightness pending the ambient light. Example: if moving into a
dark area, the display will dim to help the eyes view the display. This feature can be
enabled/disabled via the BIOS. Please contact DLI Technical Support, 800.526.1299 x774
Adjusting the brightness with the Ambient Light Sensor disabled can be done via Windows in
Control Panel. Select Start > Control Panel > Power Options. At the bottom of this window is
your Screen Brightness Bar. Slide bar to the left to dim and slide to the right to increase
brightness.
DLI 7200 Product Manual Rev. 3
13
Using the Stylus
The stylus functions as a mouse; generally, a tap is the same as a mouse click.
Tap: Tap the touch screen once to open menu items and select options.
Double Tap: Double tap is used to perform a variety of actions, such as opening a
program, opening a folder, or selecting a word of text.
Drag: Hold the stylus on the screen and drag across the screen to select text
and images. Drag in a list to select multiple items.
Right Mouse Click: Holding down the stylus for 2 seconds followed by a circle animation will
activate the right mouse click.
Calibration ensures the accuracy of the stylus and adjusts the input angle for each person who
uses it. The terminal stores calibration data and settings on a per-user basis.
Calibration:
1. Open Control Panel and select Tablet PC Settings.
2. It is recommended to select Reset before calibrating the display. Once reset, select
Calibrate.
DLI 7200 Product Manual Rev. 3
14
3. Follow the instructions and the crosshairs to calibrate.
4. Finally select Apply and then OK. The calibration is complete.
Do not write on the terminal display with ink pens or use other sharp
objects that may damage the display.
DLI 7200 Product Manual Rev. 3
Loading...