Dash Go DES001 Instruction Manual & Recipe Manual
MODEL DES001
unprocess your food
instruction manual & recipe guide
salad
chef
PAGE TITLE
32
TABLE OF CONTENTS
Safety Guidelines ................................................ 4-5
Parts & Features ................................................. 6-7
Assembly ........................................................... 8-9
Using Your Salad Chef .......................................... 10
Cone Attachments ............................................... 11
Maintenance ....................................................... 12
Recipes .......................................................... 13-25
Customer Support ................................................ 26
Warranty .............................................................. 27
4 5
SAFETY GUIDELINESSAFETY GUIDELINES
Please Read and Save this Instruction and Care Manual
When using electrical appliances, basic safety precautions should be followed, including:
• Read all instructions.
• Remove all bags and packaging from
appliance before use.
• Make sure the appliance is thoroughly
cleaned before using.
• Make sure the appliance is turned off
before unplugging the cord from the wall.
• Do not use the Salad Chef for more than
2 minutes at a time as the motor may
overheat. Allow motor to cool down
between consecutive uses.
• Do not operate the appliance without rst
inserting a Cone into the Cone Holder.
• Do not shred, grate, or slice raw/cooked
meat.
• Do not touch or remove the Cone while
appliance is in use and the motor is on.
• Never touch the Cone while it is rotating.
• Never use ngers, utensils or other objects
to remove processed food from attached
Cone while appliance is plugged in.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge
unless they are provided with supervision
and instruction concerning use of the
appliance by a person responsible for
their safety.
• When using any extension cords, make
sure the electrical rating of the wire is
compatible with the Salad Chef.
• Avoid contact with moving parts. To reduce
the risk of injury to persons and/or damage
to the appliance, do not put your hands,
hair, clothing or other objects in the Feed
Tube or Cone during use.
• Do not use hands or other objects to push
food into Feed Tube. Only insert the Food
Pusher into the Feed Tube.
• If food must be removed from the Feed
Tube, turn off and unplug Salad Chef before
attempting to remove it.
• Handle the Cones carefully as their blades
are sharp and can cause injury.
• Always make sure the voltage used is
consistent with the nominal voltage of the
Dash Go Salad Chef.
• Check that the Salad Chef is off and
unplugged before and after each use.
• Always be sure to unplug the appliance
from outlet prior to assembly, disassembly,
cleaning and storage.
• Do not place appliance on or near a hot gas
burner, hot electric burner, or in a heated
oven.
• If appliance malfunctions, discontinue use
until problem is resolved.
• Do not use any accessory attachments
that are not recommended by the appliance
manufacturer, as this may result in re,
electric shock or personal injury.
• To prevent the risk of re, electric shock, or
personal injury, do not place the cord, plug,
or unit near water or other liquids.
• This appliance is intended for household
use only.
• All components included with the Dash Go
Salad Chef are compatible with this product
only. Do not use these parts on similar
products.
• Do not use the appliance if any of the parts
are damaged.
• Do not operate any appliance with a
damaged cord or plug.
• Do not leave the appliance unattended
when plugged in.
• This appliance has a polarized plug (one
blade is wider than the other). To reduce
the risk of electric shock, this plug will t in
a polarized outlet only one way. If the plug
does not completely t in the outlet, reverse
the plug. If it still does not t, contact a
qualied electrician. Do not attempt to
modify the plug in any way.
6 7
PARTS & FEATURESPARTS & FEATURES
Food Pusher
Splash Guard
On / Off Button
Compartment
Lock Button
Drive Socket Drive Shaft
Feed Tube
Motor Base
Cone Holder
Processing Chute
Cone Compartment & Lid
Thick Slicer
Thin Slicer Fine Shredder Coarse Shredder
Grater
8 9
ASSEMBLYASSEMBLY
Clean the Salad Chef and all of its components prior to assembly and use. Always turn
off and unplug the appliance before assembling, disassembling, moving and cleaning.
1. Place the Motor Base on a clean and stable surface.
2. Insert the desired Cone into the Cone Holder. While
holding the Drive Shaft use your other hand to turn the
Cone clockwise until it interlocks with the Cone Holder.
3. Store the remaining Cones inside the Cone Compartment.
Cover with the Cone Compartment Lid. As you push the
Cone Compartment Lid into the back of the Motor Base,
hold down the Compartment Lock Button. The Lid will click
into place.
4. Hold the Processing Chute so that it is at a 90 degree
angle with the Motor Base. Insert the Drive Shaft of
the Chute into the Drive Socket. Twist the Processing
Chute counterclockwise until it locks into the Motor Base.
The Feed Tube should sit fully upright.
5. Attach the Splash Guard by lining up the Guard’s brack-
ets with the bracket slots located on the rim of the Cone
Holder. Twist the Splash Guard counterclockwise to lock it
into place. The lip should point downward.
6. Plug in the Salad Chef. Press the On/Off Button for a few
seconds to lock the Cone into place. Put a bowl or cutting
board under the Processing Chute and get ready to shred,
slice and dice!
Loading...