DASAN Zhone Solutions 2018R User Manual

2018R CPE

2.4 GHz 802.11g Wireless

Universal Range Extension SkyZhone Repeater

Users

Manual

Enhanced

Version 1.1

JUL. 2007

1

Table of contents

Package Contents

Installing Your

---------------------------------------

SkyZhone Repeater

2

------------------ 3

System R

Installation Instructions

equirements---------------------------------- 3

-------------------------------- 3

Preparing Your Network------------------------------- 5

Configuring Windows for IP Networking---------- 5

Basic Functions

Basic

-------------- -------------------------------------------------10

LAN

----------------------------------------------------------------12

WAN

---------------------------------------------------------------14

Status

---------------------------------------------------------------17

Filters

---------------------------------------------------------------18
Routing
Wir
S

ecurity

Firmware-----------------------------------------------------------31

R

eset to Defaul

------------------------------------------------------------ 1

eless

------------------------------------------------------------ 21

-------------------------------------------------------------

------------------------------------------ 8

t------------------------------------------34

9

28

2

Package Contents

The package you have r

eceived 5hould contain the following

items:

Wir

ele55 LAN
one CD-R With U5er’5 Manual and Acrobat Reader 7.0
AC/DC Power Adapter
Detachable antenna with exten5ion cord
RJ-45 Ethernet cable

Microsoft, Windows are registered trademarks of Microsoft Corporation.

Other brand and product names may be registered trademarks or trademarks of their respective
holders.

Quick In5tallation Guide

Repeater

F

CC STATEMENT

The SkyZhone Repeater complies with the part 15 of the FCC rules. Operation is subject to the
following two conditions:

1. This device may not cause harmful interface

2. This device must accept any interface received, including interface that may cause undesired
operation.

These limits are designed to provide reasonable protection against harmful interface in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if
not installed and used according to the instructions, may cause harmful interface to radio communication.
However, there is no guarantee that interface will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which is found by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:

Reorient or relocate the receiving antenna
Increase the separation between the equipment or devices
Connect the equipment to an outlet other than the receiver’s
Consult a dealer or an experienced radio/TV technician for assistance

FCC Caution:

Any change or modification to the product not expressly approved by WLAN

could void the user’s authority to operate the device.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator &
your body. This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.

3

Chapter

1

Installing Your SkyZhone Repeater

In this chapter, you’ll learn how to connect your SkyZhone Repeater

System Requirements

 One or more PCs (desktop or notebook) with Ethernet interface

 Broadband Internet access

 Ethernet cables

 Wireless interface (if planning to utilize wireless functions)

Installation Instructions

T o connect the

1.

Make sure all equipments are turned off, including the SkyZhone Repeater and your PC(s)

2.

Connect one or more client PCs to the LAN port (5)

connect to the router and PC, or use WLAN card to do the same thing after power
on.

3.

Install the antenna by either a) removing antenna from the magnetic base and

attaching to the SkyZhone Repeater directly; or b) installing the wall-mount kit and
attaching the antenna on it as shown below and connect the other end of the
extension cord to the SkyZhone Repeater

SkyZhone

Repeater H A R D W A R E

:

. You can use Ethernet cable to

4

4.

Install wall-mount kit (optional) using provided tools.

5.

Connect the power adapter (5VDC, 2.5A) to the power jack on the router. Then,

plug the power cable into an outlet.

6.

Turn on your PC(s). If this SkyZhone Repeater works correctly, you will notice

that the PWR LED is lit; WLAN and LAN LEDs are flashing, till you power
down the AP. The DIAG will be lit several seconds and then turn dark.

5

B

Chapter

Preparing Your Network

In this chapter, you’ll learn what should be done first before configuring you
SkyZhone Repeater

before you can configure your SkyZhone Repeater, you need to set up all the computers
on your network for TCP/IP networking. You also need to know certain information
from your ISP.

2

r

Configuring Windows for IP Networking

You need to configure each computer in your network for TCP/IP networking. If you plan to
use the DHCP feature (recommended), you should configure each computer to receive an IP
address automatically. See the procedure below for instructions.

If you don’t plan to use DHCP, you’ll need to manually assign an IP address to each computer.
Refer to your Windows documentation for instructions on how to do this.

T

o

C

ONFIGURE

1.

Click Start, and then choose Setting5 -> Network and Dial-up Connection5 ->

[

Name of your ISP connection].

A Status dialog box will appear:

W

I N D o W S

T o R E C E I V E D Y N A M I C

I P

A D R E S S E S

:

6

2.

Click Propertie5.

A Properties dialog box will appear:

3.

Click Internet Protocol (TCP/IP), and then click Propertie5.

7

A TCP/IP Properties dialog box will appear:

4.

Click obtains an IP

automatically

addre55 automatically and obtains DNS 5erver addre55

.

5.

Click oK

. You may need to restart your computer.

Note

This procedure applies to Windows 2000 operating systems only. For Windows
95/98/ME, Windows NT, or Windows XP, consults your Windows documentation.

8

T

Chapter

Functions

he SkyZhone Repeater comes with a web-based tool that you can use to set up and

T

customize the router settings. You can access this tool from any computer on your network.

Note

For best results, use Microsoft Internet Explorer version 5.5 or later.

O

O P E N T H E W E B

1.

Open a browser on your PC.

2.

Type

http://192.168.1.1/

3

-

B A S E D

A

D M I N

T

OO L

in the Addre55 field:

:

9

A logon page will appear:

3.

Type in the Username and Password. The default values are both admin

. If you login

as a user (u5er/u5er), a read-only privilege will be granted.

The SkyZhone Repeater Admin Tool will appear.

Note

The web-based Admin Tool will log you out after a certain period of idle time. If
this happens, you will need to re-enter your username and password.

10

Basic

The Basic screen allows you to configure the basic operation of the

SkyZhone Repeater. The Basic screen is shown in the figure below.

Note

The graphics shown in this manual may differ slightly from your SkyZhone Repeater’s
screens.

The images that appear here are provided as examples only.

1.

as an

2.

3.

4.

Admini5trator

Name: The username used to login to the SkyZhone Repeater web page

administrator.

Admini5trator Pa55word: The password used to login to the SkyZhone Repeater web

page as an administrator. Leave both fields blank to disable login authentication.

U5er Name: The username used to login to the SkyZhone Repeater web page as a

user. User cannot perform any configuration modifications.

U5er Pa55word

: The password used to login to the SkyZhone Repeater web page as a

user. Leave both fields blank to disable login authentication.