INTRODUCTION
Attaching the headband
When you combine a headset with a headband, match the shapes of the triangles.
Detaching the headset
IMPORTANT :Do not separate the headset from the headband using the
microphone boom.
Adjusting the Microphone boom
The microphone boom is flexible, so you can bend the boom
and positon it for comport and best transmission.
The ideal placement for the microphone is usually
At the corner of your mouth, not in front of it,
and about
an inch from tour face.
Be sure that the side of the microphone is pointed
Toward your mouth.
- Speaker Volume Up/Down
- Microphone Mute (Press)
- Fit the headband or ear-hook on the headset
- Adjust the boom arm of your headset so that the microphone is positioned in
the direction of your mouth, as close as possible to your mouth.
-
- For charging of headset, connect supplied usb cable to usb port.of the
headset
When installed, adjust volume level for the best level of
microphone volume.
Select ‘1’ or ‘2’ until a dial tone is heard via the telephone
connection.
This function is working when USB catridge is inserted
This function is working when Bluetooth catridge is inserted
USB/Bluetooth
catridge holder
Connection for Handset LIFTER (optional extra)
Plug Handset cord from the phone to Handset port
Connect telephone cord to the headset port or handset port of a
telephone / base unit
Connect Power Adapter to DC Jack