DAS PICKUP-AX-EV208 Data Sheet

» Tri-amplified 3-way system

» Light-weight Class D

amplifier

» Easy-DSP™ Interface

» Top grade Birch cabinet

construction

» Robust “quick-rig”

professional rigging
hardware

ALLDIMENSIONSINMILIMETERS

671

270

365

The Event 208A makes use of the M-75 compression driver with
75 mm aluminum EFW voice coil and titanium diaphragm for
HF reproduction. The proprietary injected aluminum HF wave­guide has been designed specifically for the Event Line Arrays
providing precise 90º horizontal coverage.

The Event 208A low/low-mid frequencies are reproduced by two
8" cone speakers. This section uses a "twin-band" configuration
where each speaker operates in a specific fr equency range. At
low frequencies, the speakers work in tandem for maximum
power, each driven by a dedicated amplifier channel providing
360 Wpeak output power. Above the low frequency range, the
advanced digital signal processing feeds the mid signal to only
one of the two low frequency drivers, while the other is r olled
off. This technique eliminates off-axis interference between the

drivers enabling the Event Line Arrays to maintain optimal polar
and frequency response characteristics throughout the low and
low-mid operating ranges.

Each individual enclosure for the low frequency drivers has been
tuned to provide optimum response for the specific operating
range of each driver. In the same fashion, the digital signal
processing, limiting and protections are specific to each way,
reducing intermodulation distortion.

The Easy-DSPTMInterface provides fast and easy line array
configuration. The frequency response of each unit can be
modified depending on the number of units in the array. A
“downfill” correction is also available.

360 W

peak

- 180 W
continuous

360 W

peak

- 180 W
continuous

360 W

peak

- 180 W
continuous

Balanced Differential Line
Line: 20 kohms
Line: 6.2 V (+18 dBu)
75 Hz - 20 kHz
132 dB
90º Horizontal - Splay Dependent Vertical
Birch Plywood
Black/ISO-Flex Paint
LF: 1 x 8CM4/GM 8CM4
MF: 1 x 8CM4/GM 8CM4
HF: 1 x M-75/GM 75
INPUT: Female XLR
LOOP THRU: Male XLR
AC INPUT: powerCON FCA
AC OUTPUT: powerCON FCB
115 V, 2.6A, 50 Hz/60 Hz
230 V, 1.3A, 50 Hz/60 Hz
27 x 67 x 36.6 cm - 10.6 x 26.4 x 14.4 in
30 kg (66 lb)
AX-event 208 / Pick-Up AX-event 208 /
AXS-event 208 / PL-event208S /
FUN-4-event208

Low Frequency Power Amplifier
Mid Frequency Power Amplifier
High Frequency Power Amplifier
Input Type
Input Impedance
Sensitivity
On-axis Frequency Range (-10 dB)
Maximum Peak SPL at 1 meter
Nominal -6 dB Beamwidths
Enclosure Material
Finish
Transducers/Replacement Parts

Connectors

AC Power Requirements

Dimensions (H x W x D)
Weight
Accessories (optional)

event line arrayseries

Technical Specifications

Dimensions

Powered, tri-amplified
compact line array module

event 208A

Frequency Response

Shows the frequency
response at 1 m of a
unit radiating to an
anechoic environment
and driven by a swept
sine wave signal (-10
dBu input - 1 unit pre­set).

10 100 1k 10k 20k10 Hz

110.0

dBSPL

100.0

90.0

80.0

70.0

60.0

125Hz

250Hz

500Hz

1000Hz

2000Hz

4000Hz

8000Hz

12500Hz

down up

6

0

-6

-12

-18

-24

dB

30°

60°

90°

120°

150°

180°

-150°

-120°

-90°

-60°

-30°

Ref01/3Octave

6

0

-6

-12

-18

-24

dB

30°

60°

90°

120°

150°

180°

-150°

-120°

-90°

-60°

-30°

Ref01/3Octave

NOTES. 1.Frequency response: referred to 1 m; low end obtained thr ough the use of near field techniques;
one-third octave smoothed for correlation with human hearing. 5.Polars wer e acquired by placing the unit on
a computer controlled turntable inside our anechoic chamber . Measurement distance was 4 m.

event 208A

event series

10 100 1k 10k 20k10 Hz

120.0 50

dBSPL %

110.0 40

100.0 30

90.0 20

80.0 10

70.0 0

-180

-120

-60

0

60

120

180

100 1k 10k12k5Hz

0

dB

-10

-20

-30

-50

-40

-180

-120

-60

0

60

120

180

100 1k 10k12k5Hz

0

dB

-10

-20

-30

-50

-40

Distortion

Shows the Second
Harmonic Distortion
(grey) and Third
Harmonic Distortion
(dotted) curves for a
unit driven by a swept
sine wave signal (0 dBu
input).

Horizontal Directivity

Shows normalized
horizontal isobar plot.

Vertical Directivity

Shows normalized
vertical isobar plot.

Polar Response

Shows the 1/3 octave
band horizontal (left)
and vertical (right)
polars for the indicated
frequencies. Full scale
is 30 dB, 6 dB per
division.

Product improvement through r esearch and development
is a continuous process at D.A.S. Audio. All specifications
subject to change without notice.