Darkglass Electronics Vintage Ultra V2 Users Manual
USER MANUAL
Darkglass Suite
Download the free Darkglass Suite software from
www.darkglass.com/suite to configure the pedal, load new
impulses and download firmware updates.
Darkglass Suite comes with a selection of cabinet IRs made
by some of our artists. It also allows you to load your own IRs
in WAV and AIFF formats and organize your IR files. See the
online manual of Darkglass Suite for more information.
Disclaimer
In the interest of continuous improvement, specifications are
subject to change without notice. If you have any questions,
please don’t hesitate to contact us at www.darkglass.com
The manufacturer claims that the above product fulfills the
requirements as set by EN55013, EN55020, EN60555-2,
EN60555-3, RoHS, WEEE.
Vintage Ultra
Tone Elixir
Massive and rich tube amp tones, with a colorful pallette of
harmonics, together with the legendary taste of a tube
overdrive represents the identity of the Vintage Ultra. All,
without compromising performance and endurance from a
preamp that carries the Microtubes Technology.
Warning
The Vintage Ultra has a current draw of 30mA. Only use a
regulated 9V DC adapter with a center-negative plug. Due to
ecological reasons it does not accept batteries. Unregulated
power supplies and/or higher voltages may result in
suboptimal noise performance and even damage your unit,
voiding the warranty.
Warranty
To activate the warranty, we encourage you to register your
product on: http://mypedal.darkglass.com and enter the serial
number on the back of your pedal.
Please contact us via email support@darkglass.com before
shipping a product to us.
Loading...