Darkglass Microtubes B7K Ultra V2 User manual

USER MANUAL

Darkglass Suite

Download the free Darkglass Suite software from
www.darkglass.com/suite to configure the pedal, load new
impulses and download firmware updates.

Darkglass Suite comes with a selection of cabinet IRs made
by some of our artists. It also allows you to load your own IRs
in WAV and AIFF formats and organize your IR files. See the
online manual of Darkglass Suite for more information.

Disclaimer

In the interest of continuous improvement, specifications are
subject to change without notice. If you have any questions,
please don’t hesitate to contact us at www.darkglass.com

The manufacturer claims that the above product fulfills the
requirements as set by EN55013, EN55020, EN60555-2,
EN60555-3, RoHS, WEEE.

Microtubes B7K
Ultra v2

Absolute Control.

The new version of the Microtubes B7K Ultra features all the
versatility and sonic possibilities of the first version plus: (1)
Single user loadable cabinet simulation impulse response. (2)
Micro-USB B port to connect to PC/Mac to load a different
Virtual Cabinet through the Darkglass Suite. (3) 3.5mm
headphone output with cabinet simulation. (4) Balanced XLR
output with switchable cabinet simulation.

Warning

The Microtubes B7K Ultra v2 has a current draw of 30mA.
Only use a regulated 9V DC adapter with a center-negative
plug. Due to ecological reasons it does not accept batteries.
Unregulated power supplies and/or higher voltages may result
in suboptimal noise performance and even damage your unit,
voiding the warranty.

Warranty

To activate the warranty, we encourage you to register your
product on: http://mypedal.darkglass.com and enter the serial
number on the back of your pedal.