Darfon Electronics N747 User Manual

N747 Wireless Laser Mouse User’s Guide

Important Health Information

Certain repetitive strain injuries, including pain, numbness and weakness to hands,
wrist, arms, neck and/or back have been identified by some experts as being
associated with the prolonged use of mice. If you are experiencing injury symptoms,
consult a medical professional. A person’s susceptibility to these injuries may be
affected by many factors, including body posture, repetitive physical activities and
general physical health.

Package Contents:

 Wireless Laser Mouse
 USB Receiver
 2 x AA alkaline Batteries
 User’s Guide

System Requirements:

 IBM® Compatible PC with Microsoft Windows® 98/ 2000/ Me/ XP

or Mac® OS X v10.4.

 Available USB Port

Battery Installation

Step 1: Remove the battery cover.
Step 2: Place 2 AA alkaline batteries into the battery compartment as indicated.
Step 3: Lock the battery cover back into its place.

NOTE:

1. You will find 2 AA alkaline batteries for the mouse included in this package. If
you need to replace the batteries in the future, make sure that you use new batteries

and that you change all of the batteries at the same time.

2. Please follow the diagram for battery installation direction. It is recommended to
use 2 AA alkaline batteries. Ensure battery polarity matches the polarity markings
on the battery compartment.

3. This mouse also allows you to work with merely a single battery.

Hardware Installation

Step 1: Press the front wireless USB mini receiver eject

button located on the battery cover as indicated, then
pull out and remove the wireless USB mini receiver
from the mouse.

Step 2: With your computer turned on, plug the wireless USB mini receiver into an

available USB port on your computer.

Step 3: The system will automatically detect the new hardware and install the device

ready for use.

Step 4: Proceed to 'Establishing a Wireless Connection' to complete the installation.

Establishing a Wireless Connection

Once the wireless USB mini receiver is connected to your PC, a wireless connection
will need to be established between it and the mouse:
Step 1: Be sure to power on the power switch of mouse base.
Step 2: Ensure the mouse and wireless USB mini receiver are set up as described in

‘Battery Installation’ and ‘Hardware Installation

Step 3: Press the CONNECT button on the wireless USB mini receiver, then press the

CONNECT button on the mouse base.

’