Darfon Electronics N737 User Manual

N737 User’s Manual

Important Health Information

Certain repetitive strain injuries, including pain, numbness and weakness to
hands, wrist, arms, neck and/or back have been identified by some experts as
being associated with the prolonged use of mice. If you are experiencing
injury symptoms, consult a medical professional. A person’s susceptibility to
these injuries may be affected by many factors, including body posture,
repetitive physical activities and general physical health.

Package Contents:

 N737 Wireless Laser Mouse
 Wireless Receiver
 2x AA NiMH Alkaline Batteries
 User’s Guide

System Requirements:

 IBM® Compatible System
 Microsoft Windows® 98SE, 2000, Me, XP, or Mac® OS X v10.4.
 An Available USB Port

1. Battery Installation

Step 1: Remove the battery cover.
Step 2: Place 2 AA alkaline batteries into the battery compartment as

indicated.

Step 3: Lock the battery cover back into its place.

NOTE:

1. You will find 2 AA alkaline batteries for the mouse included in this
package. If you need to replace the batteries in the future, make sure that you
use new batteries and that you change all of the batteries at the same time.

2. It is necessary to use 2 AA alkaline batteries. Ensure battery polarity
matches the polarity markings on the battery compartment.

1

Hardware Installation

Step 1: Press the front wireless USB mini receiver eject button located on the

battery cover, then pull out and remove the w ireless USB mini receiver
from the mouse.

Step 2: With your computer turned on, plug the wireless USB mini receiver into

an available USB port on your computer.

Step 3: The system will automatically detect the new hardware and install the

device ready for use.

Establishing a Wireless Connection

Once the wireless USB mini receiver is connected to your PC, a wireless
connection will need to be established between it and the mouse:
Step 1: Be sure to power on the power switch of mouse base.
Step 2: Ensure the mouse and wireless USB mini receiver are set up as

described in ‘Battery Installation’ and ‘Hardware Installation

Step 3: Press the CONNECT button on the wireless USB mini receiver, then

press the CONNECT button on the mouse base.

NOTE:

1. To ensure correct operation, please make sure that the wireless USB

mini receiver is properly installed at least 20 cm (8 inches) away from
electromagnetic devices such as monitors or speakers. Also please make sure
that the wireless USB mini receiver is installed at least no more than 10 meters
away from the mouse.

2. If the mouse does not activate, please repeat Step3

3. The RF 27 MHz Wireless technology allows user to enjoy a more
stable or almost wireless anti-interference environment, as compared with a
general spectrum of conventional mouse.

’

Multiple Power-Saving Modes

The mouse can be manually set to sleep mode by simultaneously pressing all
three buttons (both the Left and Right mouse buttons and the Scroll Wheel
button at the same time). Press any mouse button to resume normal mouse
operation.
This mouse will go into an automatic sleep mode after it has not been used for
a period of time. Also press any button to go back to its working mode.
When the wireless USB mini receiver is stored in the smart receiver storage
compartment, the mouse will go into an automatic sleep mode.
Simply power off the power switch on mouse bottom.

2