Windows is a registered trademark and Windows Vista is a trademark of Microsoft Corporation in the United States and/or other countries.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
©2008. RadioShack Corporation. All rights reserved. Gigaware is a trademark and RadioShack is a registered trademark used by RadioShack Corporation.
26-990
04A08
Printed in China
What’s Included
Mouse Receiver
Carry Pouch User’s Guide
System Requirements
• Operating System: Windows Vista™ Windows® XP
Windows 2000
Mac OS 10.0.8 or later
• Connection: USB 1.1
Specifications
Operating Distance ...................................... 3M
RF Frequency ....................................... 2.4 GHz
RF Modulation.......................................... GFSK
RF ID ..................... 62565ID, Random, Auto Link
Resolution .......................Up to1600 dpi (Actual)
Sensor ...........................................Avago 7532
Movement Detect Mode ................. Laser Sensor
Contact Method ........ Micro Switch/Wheel Switch
USB .............................. 1.1 Version (1.5 Mbps)
Power Supply
Mouse ............................ 3V, Two AAA Batteries
Receiver .................. 4.4~5.25V, 100mA (Max.)
Specifications are subject to change and improvement
without notice. Actual product may vary from the
images found in this document.
RF Emissions Information
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult your local
RadioShack store or an experienced radio/TV technician
for help. If you cannot eliminate the interference, the FCC requires that you
stop using your mouse. Changes or modications not expressly approved by
RadioShack may cause interference and void the user’s authority to operate
the equipment.
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including
interference that may cause undesired operation.
Limited 90-day Warranty
This product is warranted by RadioShack against manufacturing defects in
material and workmanship under normal use for ninety (90) days from the date of
purchase from
RadioShack company-owned stores and authorized RadioShack
franchisees and dealers. For complete warranty details and exclusions, check
with your local
RadioShack store.
RadioShack Customer Relations
300 RadioShack Circle, Fort Worth, TX 76102 04/04
www.radioshack.com
Protect the environment by recycling used electronics.
Go to www.ecyclingcentral.com to find a recycling
location near you.
Wireless Laser Mouse 26-990
Product Wireless Laser Mouse with
Hideaway USB Receiver
Model 26-990
Responsible Party
RadioShack
300 RadioShack Circle
Fort Worth, TX 76102
Phone 817-415-3200
Scroll Wheel
• Supports Auto Scroll (Windows)
• For Mac OS 10.4, click the scroll
wheel to activate the Dashboard.
Thank you for purchasing your Wireless Laser Mouse with
Hideaway USB Receiver from RadioShack. Its compact design
and hideaway USB receiver make it great for travel. The
Antimicrobial coating helps prevent bacteria growth to keep
the mouse surface more sanitary. Please read this user’s guide
before installing, setting up and using your new mouse.
Right Button
Mouse Settings
See your operating system’s online help for additional
information about mouse configuration and use.
Care and Service
• Use and store the mouse only in room temperature
environments.
• Do not use the mouse on surfaces made of glass,
black velvet, or mirror as these surfaces may disrupt
function.
• Keep the mouse dry; if it gets wet, wipe it dry
immediately.
• Keep the mouse away from dust and dirt, and wipe
it with a damp cloth occasionally to keep it looking
new.
• Handle the mouse carefully; do not drop it.
• Do not modify or tamper with your mouse’s internal
components. It may cause a malfunction and
invalidate its warranty.
Class 1 Laser Product
This device uses a laser light beam and is classified
as a CLASS 1 laser product. Do not attempt to
disassemble this unit. Laser rays from the optical
pickup are dangerous to the eyes.
Danger: Visible and invisible laser radiation is possible if
open or if the interlock fails or is defeated. Avoid direct
exposure to the beam.
Caution: There are no user-serviceable parts inside this
unit. Do not open the top cover. Make sure that pins or
other foreign objects do not get inside the mouse. Only
a qualified service person should remove the cover or
attempt to service this device due to possible eye injury.
Your mouse requires two AAA batteries (not supplied)
for power. Replace the batteries when indicator flashes
continusouly.
1. Remove the battery compartment cover from the mouse.
2. Insert two batteries
as indicated by the
polarity symbols (+ and
–) marked inside.
3. Slide up the reject
button to pop out the
receiver.
Insert the receiver into
the slot of the mouse
when not in use.
4. Replace the battery
cover.
5. Slide the ON/OFF switch to ON.
6. Plug the receiver into your computer’s USB port.
7. Slide ON/OFF to OFF to turn off and save battery power
after you finish using your mouse.
Note: The mouse will automatically switch to suspend
mode if it is left idle for more than xx minutes. To
resume power, click any button on the mouse.
Battery Notes:
• Dispose of old batteries promptly and properly. Do not burn
or bury batteries.
• Use only fresh batteries of the required size and
recommended type.
• Do not mix batteries of different size or chemistries.
• If you do not plan to use your mouse for a long time,
remove the batteries. Batteries can leak chemicals
that can damage electronic parts.
with Hideaway USB Receiver
Indicator
The indicator flashes
continuously when the mouse
is in low-battery.
Setting Up Your Mouse
Left Button
ON/OFF
Reject
Button
26-990.indd 1 4/23/2008 5:54:27 PM
Loading...