A. Introduction
Congratulations on your purchase of the Innovative Bluetooth Keyboard. Now, if you
replace your Bluetooth handheld, you won’t have to replace your keyboard. Using
Bluetooth HID Profile technology to communicate with your handheld, this innovation
lets you input data to your device without physically attaching it to the Keyboard.
Connection distance is up to 7M. It works with most popular Bluetooth handhelds.
Hope it can bring you convenience of typing.
B. Introduction of LED and Button
LED position: Upper right corner on the keyboard.
LED light color: Orange and Red
LED function:
Orange To indicate the Bluetooth connection status, detail please
refer to following,
Red To indicate the low battery
Orange LED has two status: Slow flashing and OFF
(a) Slow flashing: Keyboard is in discoverable mode which means the user can inquiry
and connects to the keyboard from device side.
(b) OFF: It means the keyboard is in either connected or sleep mode. In discoverable
mode, keyboard will go into sleep mode after 60 seconds.
When in connected state, the LED is also off.
Red LED has only one status: Slow flashing
When the battery capacity is low, the red LED flashes, two times per one second.
Connect button has 2 functions.
(a) Wake up the keyboard.
(b) Disconnect the link. When in connected state, user can press connect button to
cancel the link. However we recommend the user disconnect the link from the device
side.
C. Re-charging Function
This keyboard attaches the re-charging function. While user uses the rechargeable
batteries in the keyboard, user can charger the batteries via mini USB cable. If
plugging mini USB cable and rechargeable batteries in keyboard inside, the red LED
will be on. After fully charging, the LED will be off.
If user puts the non- rechargeable batteries in the keyboard and plugs the Mini USB
cable, the LED will flash to inform user.
D. Connection Steps of Iron Horse Keyboard driver
Create the first connection after installation
Step 1: Go to Start > Programs, and click “BT HID Keyboard” to launch the keyboard
driver.
Step 2: Please turn on the power light on the
keyboard
Step 3: Check “Enable Keyboard”. The
searching BT devices dialog will be pop up.
Step 4: Select a BT HID keyboard in the
searching dialog. The PIN code dialog will
be pop up.
Step 5: Input the PIN code showed in the
PIN code dialog and press “Enter” key
after the PIN code is inputted.
If a new connection is successful
established, a “plug-in” sound will inform
the user that it is successful to connect.
Create another new connection after a connection is destroyed
Situation 1: Select the “New” option
Step 1: Select the “New” option, and check “Enable Keyboard”
Ste p2: Select a BT keyboard in the searching dialog.
Step 3: Input the PIN code and press the “Enter” key.
It will play a “Plug-in” sound to inform a user that a connection is established.
Situation 2: Select the “Old” option
Step 1: Select the “Old” option and check “Enable keyboard”.
Step 2: Input the PIN code which is showed in the PIN code dialog and press the
“Enter” key.
It will play a “Plug-in” sound to inform a user that a connection is established.
Destroy a connection
Step 1: Press the paring key on the BT HID keyboard and make sure the power light is
on. There will be an “Unplug-in” sound to inform the user the connection is destroyed.
Reconnection (without pressing the paring key)
Situation 1: Uncheck “Enable Keyboard”
Step 1: Uncheck “Enable keyboard” without pressing the paring key.
Step 2: Keep the “Old” option is selected.
Step 3: Check “Enable Keyboard” again and strike the keyboard.
The keyboard will reconnect to the same PDA.
Situation 2: Remove / Install batteries
Step 1: Remove batteries on the keyboard.
Step 2: Put batteries back into the keyboard again.
Step 3: Strike the keyboard, and it would reconnect to the same PDA.
Situation 3: soft reset the PDA
Step 1: Soft reset the PDA.
Step 2: Strike the keyboard after rebooting.
The keyboard will reconnect to the same PDA.
Situation 4: Out of range of Bluetooth
Step 1: Take the PDA or the keyboard away from the range of BT.
Step 2: Make sure the two devices both are in the area of BT again.
Step 3: Strike the keyboard and it would reconnect to t
E. Key function for typing on PC (Without driver
support)
Basic key function -- All key printed by white color.
` ~ Tab Caps Lock R-Shift Ctrl
1 ! Q A Z
2 @ W S X alt
3 # E D C Space
4 $ R F V alt gr
5 % T G B
6 ^ Y H N
7 & U J M
8 * I K , <
9 ( O L . >
0 ) P ; :
- _ [ { ‘ “ L-Shift
= + ] } Enter / ?
← backspace
Combination key
Keystroke Combination Function
\ |
↑(Up)
←(Left)
↓(Down)
→(Right)
Shift ( ) + letter key
Shift ( ) + number key
Fn + left arrow Home
Fn + right arrow End
Fn + up arrow Page up
Fn + down arrow Page down
Fn + 1 F1
Fn + 2 F2
Fn + 3 F3
Fn + 4 F4
Fn + 5 F5
Fn + 6 F6
Fn + 7 F7
Fn + 8 F8
Capital letter
Upper-left character on key
Fn + 9 F9
Fn + 10 F10
Fn + - F11
Fn + = F12
Fn + Q Inbox
Fn + U Internet Explorer
Ctrl + C Copy
Ctrl + V Paste
Ctrl + X Cut
Ctrl + A Select all
Ctrl + Z Undo
F. Hotkey on PDA(Need driver support)
Keyboard Shortcuts
Keystroke Combination Function
Fn + W Pocket Word
Fn + E Pocket Excel
Fn + R Calendar
Fn + T Tasks
Fn + Y Notes
Fn + A Contacts
Fn + S Today
Fn + F iTask
Fn + number key Hotkey function
Fn + \ OK
Fn + Backspace Off
Fn + / Battery power level
Shift ( ) + right arrow
Shift ( ) + left arrow
Pocket PC device Start Menu
Selects area to the right of the cursor
Selects area to the left of the cursor
Shift ( ) + up arrow
Shift ( ) + down arrow
Selects area above the cursor
Selects area below the cursor
Euro character list
Key Description How to activate
D
Character tail for Euro language
just like"´"
Character tail for Euro language
F
just like"`"
Character tail for Euro language
G
just like"^"
Character tail for Euro language
H
just like"˜"
Character tail for Euro language
J
just like"¨"
Character tail for Euro language
K
just like"°"
Z Symbol for Euro language "µ" Alt Gr+"Z"
X Symbol for Euro language "ç" Alt Gr+"X"
C Symbol for Euro language "β" Alt Gr+"C"
V Symbol for Euro language "¡" Alt Gr+"V"
Alt Gr+"D", then press Key which you
want to key in.
Alt Gr+"F", then press Key which you
want to key in.
Alt Gr+"G", then press Key which you
want to key in.
Alt Gr+"H", then press Key which you
want to key in.
Alt Gr+"J", then press Key which you
want to key in.
Alt Gr+"K", then press Key which you
want to key in.
B Symbol for Euro language "ñ" Alt Gr+"B"
N Symbol for Euro language "Ñ" Alt Gr+"N"
M Symbol for Euro language "¿" Alt Gr+"M"
E Symbol for Euro language "€" Alt Gr+"E"
P Symbol for Euro language "₤" Alt Gr+"P"
G. Product Regulatory Information
Safety Statement
Warning: Prolonged or improper use of the keyboard may result in discomfort or
injury.
The keyboard is not intended for extended or intensive use. If discomfort develops,
consider changing your method of input or the manner in which you use the keyboard
or stylus. If discomfort or pain persists, either decrease usage or consult a medical or
ergonomics professional.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1)This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
‧ Reorient or relocate the receiving antenna.
‧ Increase the separation between the equipment and receiver.
‧ Consult the dealer or an experienced radio/TV technician for help.
The use of shielded I/O cables is required when connecting this equipment to any and
all optional peripheral or host devices. Failure to do so may violate FCC rules. Changes
or modifications not covered in this manual must be approved in writing by the
manufacturer’s Regulatory Engineering Department. Changes or modifications made
without written approval may void the user’s authority to operate this equipment.
Loading...