LP-100 User Manual
MM/MC Audiophile Grade Tube Phono Preamplifier
Thank-you for selecting DARED as your choice
for your audio entertainment system and
listening pleasure.
Experience The Art of Tube
Tube ． The Purity of Sound
Technical Specifications
LP-100 MM/MC Audiophile Grade Tube Phono Preamplifier
．
Power Supply Input: 50W
．
Voltage Range: 100-120V, 220-240V
．
Max. Current Draw Indicated: 50W
．
Power Consumption: 50W
．
Distortion Spec.: 0.07% (1kHz)
．
Tube compliment: (1)ECC85(6N1) (2)12AX7
．
Inputs: one pair MC (RCA); one pair MM (RCA)
．
Outputs: one pair RCA outs
．
MC gain: max. 63dB (adjustable to 66dB and 60dB)
．
MM Capacitive Loading: 10pF, 20pF, 47pF, 100pF
．
MM Resistive Loading: 47KΩ fixed
．
MC Resistive Loading: adjustable 20Ω, 50Ω, 75Ω, 100Ω, 200Ω, 500Ω
．
Frequency Response: 10Hz – 25kHz (±2dB)
．
Power sequence: Mute delay power up squence with soft start for
improved tube life
．
Dimensions: 380x280x125mm (WxDxH)
14.96''x11.02x4.92''
．
Weight: 8kg / 17.64lbs
Dear Valued Customer:
Thank-you for purchasing our revolutionary MM/MC Audiophile Grade Tube
Phono Preamplifier for your home or office as part of your music
entertainment system. This component has been designed to offer state-of-theart high-end performance in an elegant package while retaining all the sonic
hallmarks on which DARED has been recognized for since 1995. Our
dedication to the “Purity of Sound” is an imprtant reason why our products are
sought after retain their value over time.
The performance of your LP-100 will continue to improve durning the first
480 hours of listening. This is the result of a “break-in” period required for the
numerous high quality electronic parts and ageing of the tube used throughout
this integrated amplifier. Before use we encourage you to please read this
manual thoroughly to properly acquaint yourself with its features. We hope
you enjoy listening to our Product as much as we have had the pride that we
have taken in manufacturing this fine receiver for your listening pleasure.
Thank-you for choosing DARED for your audio experience!
2
MAINTENANCE:
Tube Replacement
When Should I replace a tube? This is a hard one to Answer as in this unit your tube
should last depending on its use for a very long period of time. If you hear unusual
sounds, squeals, or have low audio output, or distorted output, it is time to consider
replacing the tube. Your DARED Dealer may assist. Replace tubes always with the
same model number.
Regular Care
Keep the unit clean and free of dust.
Always turn of power and let the tube cool before cleaning the tube area and unit.
The vacuum tube may be removed easily with a gentle jiggle while lifting the tube
upwards out of its socket. Use the same method when reinstalling the tubes. Only
touch when cool.
When cool the vacuum tubes may be cleaned with a soft and slightly dampened
microfiber cloth.
The case may be cleaned with a slightly sampled microfiber cloth and then polished
using a separate dry soft microfiber cloth.
7
UNPACKING: The DARED LP-100 MM/MC Audiophile Grade Tube Phono
Preamplifier should be removed from its box with care. The following
accessories should be found inside:
． AC power cable
．
Tube Cover
．
This Owner's Manual
．
Tube
As soon as the amplifier is safely removed from its packaging please perform a
thorough physical inspection and report any physical damage to your dealer
immediately
. We suggest that you keep all of the original packaging, storing in a
safe, dry place in the event that you may need it later to transport or move this
product.
At this time also please locate the Product Registration Card and write down the
serial number of your new LP-100 in the space provided on the card as well as
below for future reference.
Serial No.: ________________ Date of Purchase:___________________
3
Basic Troubleshooting
Symptom Cause Possible Solution
A. Unit does not
power up
AC Power On light
does not come on
1) Check if power cord is plugged
into a powered AC outlet
2) Check if external power supply
switch is turned on
3) Check if LP-100 power switch is
turned on
B. Vacuum Tube
does not glow or
light up
With external power
supply turned on, LP100 power switch
turned on, power
indicator on, tube does
not light
1) Check if tube is correctly
installed and secure in socket
2) Change out tube for same model
number
C. No Sound from
speakers connected
to amplifier
Turntable working,
LP-100 seems to be
working
1) Check selector switch: MM to
MC, make sure proper input
selected
2) Ensure that phono output is
connected to correct MM or MC
input
3) Check that phono output is
connected to pre-amp LINE input
D. Sound is
distorted
Turntable working,
sound volume is low,
distorted
1) to see if proper cartridge input is
selected: MM or MC
2) Check settings of LP-100
3) Change tube
IF you continue to experience difficulty and cannot solve your issue or have
other problems or where the particular problem is not listed, disconnect the
power cord and contact your Authorized DARED Dealer for assistance.
6
SAFETY NOTICES:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings and follow all instructions in this Manual.
4. Do not use this apparatus near water.
5. Clean only with a dry cloth.
6. Do not block ventilation openings. Install in accordance with instructions.
7. Do not install near any heat sources such as radiators, heat refisters, stoves
or another apparatus that produces heat.
8. Do not defear the safety purpose of the polarized or grounding type plug. If
the provided plug does not fit into the outlet, consult your Reseller.
9. Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles, etc... Unplug the AC mains cord as well as all
other connecting cables during transportation.
10. Only use attachments and accessories specified by DARED or your
Authorized DARED Dealer.
11. Use a surge protector on the main AC-Line to this component as well as all
other components connrcted to this product. Unplug this apparatus during
lightning storms or when unused for long periods of time.
12. Refer all servicing to qualified service personnel. NO USER
SERVICEABLE PARTS INSIDE. Owner may change tubes.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
OTHER SAFETY CONSIDERATIONS
1. ALWAYS disconnect your entire system from the AC mains before
connecting or disconnecting any cables, or when cleaning any
component. To completely disconnect this apparatus from the AC mains,
disconnect the power supply cord plug from the AC receptacle.
2. NEVER use flammable or combustible chemicals for cleaning audio
components.
3. NEVER wet the inside of this component with any liquid. If a liquid
substance does enter your unit, immediately disconnect it from the AC main
and take it to your DARED Dealer for inspection.
4. NEVER spill or pour liquids directly onto this component.
5. NEVER block air flow through ventilation slots or heat sinks.
4 5
FAMILIARIZING YOURSELF WITH YOUR LP-100
Front Panel
1. Power On/Off Button
2
. MM or MC input selector
3. Subsonic filter selector
4. MM capacitance selector
5. MC impedance selector
6. Gain Control
Rear Panel
1. MC Input
2
. MM Input
3. Grounding Terminal
4. RCA Output
5. AC Power Input
Connections
(a) Before making connections, ensure that the power
switch is
turned off.
(b) Select ''MM'' or ''MC'' for Turntable cartridge input connections.
(c) Use a grounding wire between turntable and phono
preamplifier.
(d) Select ''MM'' or ''MC'' on front control panel.
Connection Diagram
Loading...