Page 1
Important safety instructions:
Please carefully read all instructions before assembling.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
Pre-assembly:
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
Remove all parts and hardware from box along with any plastic protective packaging.
H1
H2
H3
H4
H5
H6
H7
H8
H9
Page 2
Assembly Procedures:
Step 1. Assemble the stool on a flat, soft surface such as a carpet or cloth to prevent scratching the finish.
Loosely attach each back leg (P3) to the bottom of chair top (P1) following the labels "P3" on the front legs
accordingly and using long bolts (H1), lock washers (H2) and flat washers (H3) as shown below.
(H5)x2
(H6)x2
(H7)x2
(H8)x1
H6
Page 3
Step 3. Loosely attach one front leg (P2) to the chair top (P1) and back stretcher (P4) following the labels "P2" on
the front leg accordingly and using long bolts (H1), lock washers (H2) and flat washers (H3) as shown below.
(H1)x2
(H2)x2
(H3)x2
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE SURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
Loading...