Page 1
ASSEMBLY INSTRUCTIONS
COUNTER HEIGHT CHAIR
WITH CUSHION SEAT
PAGE 1 OF 2
Page 2
ASSEMBLY INSTRUCTIONS
PARTS IDENTIFICATION
HARDWARE IDENTIFICATION
A
CHAIR BACK
2PCS
1
LONG BOLT
8PCS
2
MEDIUM BOLT
8PCS
B
CUSHION SEAT
2PCS
WITH FRAME
3
SHORT BOLT
2PCS
C
LEFT FRONT LEG
2PCS
4
LOCK WASHER
18PCS
D
RIGHT FRONT LEG
2PCS
5
FLAT WASHER
18PCS
E
RIGHT SIDE STRETCHER
2PCS
6
ALLEN WENCH
2PCS
F
LEFT SIDE STRETCHER
2PCS
7
SCREW
12PCS
STEP 1
STEP 2
!
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishment
G
1.1 Align & hand tighten cushion seat with frame to chair back 2.1 Insert front, left & right side stretchers to left and right front legs.
bottom rail using short bolt, lock washer & flat washer.
1.2 Align & hand tighten cushion seat with frame to chair back leg frame using medium bolt, lock washer & flat washer.
using long bolt, lock washer & flat washer.
1.3 Tighten all bolts with Allen wrench. 2.3 Fasten front, left & right side stretchers to back, left & right front
1.4 Insert left and right side stretchers to chair back legs.
FRONT STRETCHER
NOTE : QUANTITIES SHOWN ARE FOR TWO CHAIRS
6
1
2PCS
2.2 Then align & fasten left and right front legs to cushion seat with
TIGNTEN WITH ALLEN WRENCH.
legs using screw.TIGNTEN WITH SCREW DRIVER ( NOT INCLUDED ).
4
B
5
4
2
D
6
E
G
7
F
C
STEP 3
Complete.
A
B
3
5
4
5
E
A
7
F
PAGE 2 OF 2
Loading...