Page 1
Part#
Large Wooden Seat Base
Central Post, Wooden Seat
1
Frame(larger), Metal Arm
Rest Frame & Seat Cushion
2
Back Cushion
Back Cushion
3
Arm Pads
Parts & Hardware List
Description
Quantity
1
1
1
3
A
Picture
3
B
Recliner and Ottoman
Recliner Assembly Instructions
Please read the assembly instructions thoroughly and assemble this recliner per the assembly instructions.
Please note that using an incorrect assembly method may damage the structure of this recliner!
TW O PE OPLE ARE R ECOMM EN DE D
FO R BA CK CUSH IO N ASSE MB LY!
2
1
9
2
8
1
7
4
Ottoman Cushion
Smaller Wooden
5
Ottoman Frame
Smaller Wooden
6
Ottoman Base
1" Big Screws
7
Nuts
8
9
2-1/4" Big Screws
1 0
1-5/8" Big Screws
1 1
1" Small Screws
Flat Washers
1 2
1 3
Spring Washers
1 4
Wrenches
1
1
1
2
2
2
4
8
4
4
2
NOTE: Before using your recliner, ensure that all the screws are
tightened fully for safety. Keep the allen wrenches and check all
screws periodically to ensure these remain tightly fastened.
Step 1:
Step 3:
Attach the back cushion (2) onto the pre-assembled
large wood seat base, central post, large wooden
seat frame, metal arm rest frame & seat cushion (1).
Align the holes of the metal arm rest frame (1) to both
sides of the back cushion (2). Fasten by using 2-1/4"
big screws (9).
3B
3A
1
11
Attach the right arm pad (3A) and left arm pad (3B)
onto the metal arm rest frame (1) using 1" small
screws (11). Do not tighten screws fully until you
have completed assembly.
Step 2:
After assembling the back cushion to the arms, loosen the
tension adjustment knob at the right side of the recliner and
slide the seat forward. While pulling slightly on the back
cushion from behind the recliner, align the holes of each
bracket on the bottom of the back cushion (2) to the metal
rings on the rear of the seat cushion (1). Insert the 1" big
screws (7) through the metal rings in the nuts (8) and
tighten the screws.
Page 2
10
13
Ottoman Assembly Instructions
12
Step 4:
6
5
Attach the smaller wooden ottoman base (6) on top of the
smaller wooden ottoman frame (5). Attach by using 1-5/8"
big screws (10) with spring washers (13) and flat washers
(12). Tighten all screws.
OPE RATI NG INSTRUCT IONS
Step 5:
5
11
Turn the ottoman cushion (4) upside down on the floor and
attach the wooden ottoman frame (5) to the ottoman
cushion (4) by using 1" small screws (11). Tighten all
screws. Turn the ottoman upright.
11
4
1. While seated in the recliner, reach to the right side of the recliner and
find the adjustment knob. Turn the adjustment knob counter-clockwise
and the back seat cushion will recline back. To lock the back seat
cushion into desired position, turn the adjustment knob clockwise until
tightened.
2. 360 degree swivel.
Loading...