DARAY SL180LED, X350 User Manual

SL180LED

Mobile Minor Surgical Light

Manual

QAM.SL180LEDFM.0315.7

3

1. GENERAL DESCRIPTION

4

2. SPECIFICATION
Serial number
Product identification

5

3. OPERATION

6

4. MAINTENANCE

8

5. FUSE REPLACEMENT

9

6. SPARE PARTS

10

RETURNS POLICY

11

WARRANTY

12

WARRANTY REGISTRATION

13

Tel: [phone] Fax: [phone]

email: [e-mail] url: www.daray.com

4

1. GENERAL DESCRIPTION

DARAY’s SL180LED is a cost-effective mobile medical minor surgical light utilising LED
technology.

The mobile base contains a transformer to convert the mains electrical input to a safe, low
voltage which is fed to the light-head. The base is very stable and manoeuvrable, and is
fitted with 2 locking and 2 free castors; it will fit underneath most couches, tables and
chairs.

The SL180LED light-head swivels through 320° on a flexible arm on top of a telescopic up­stand, allowing the light-patch to be directed wherever it is required for examination.

DARAY’s BioProtect anti-microbial coating is applied to the light-head and the handle.
All other surfaces are smooth to aid cleaning and sterilisation.

5

2. SPECIFICATION

Light output at 0.75m

0 - 50,000 lux @ 0.75m ± 5%

Colour temperature

4,300K natural white light

Colour rendering

Ra=95

Power consumption

15W

LED module operating voltage

24-36V DC

Light-head range of vertical
movement above floor

750 mm to 1750 mm

Input voltage

230V 50Hz

Quality approvals

CE

The product serial number and identifying labels are located next to the mains inlet on the
rear of the mobile base.

6

3. OPERATION

Position the light by moving it using the handle provided on the main stand.

Note: The light must not be lifted using the light-head handle or gooseneck. To position
the light, hold the upstand and move the light-head using the handle.

The front castors on the base have brakes which can be used to help keep the base from
moving whilst the light-head position is adjusted.

Unwrap the flex from the cable holders

Plug the IEC connector into the base ensuring the metal safety retainer is fitted over the top
of the IEC plug connector.

Once connected to the mains, switch the illuminated power switch ON and the green
indicator will be illuminated. If the indicator does not illuminate, check the power supply
and then check the fuses located in the IEC socket on the mobile base (see section 5. FUSE
REPLACEMENT) and also in the mains plug. Further fault investigation should only be carried
out by a qualified electrician.

Turning the light ON/OFF and adjusting the intensity

Illuminated

power switch

IEC mains

connector

Safety
retainer

7

There is a rocker switch on the light-head near the handle.
This is a momentary type switch and does not latch.

 Press the switch once to turn the light ON
 Press and hold to decrease intensity
 Press and hold to increase intensity
 Press the switch once again to turn the light OFF

Note: If mains power is removed by either unplugging or
turning off at the base, the intensity will be reset to its
brightest setting when the light is powered on again.

The light-head can be rotated on the flexible arm which
itself can be bent almost double so the light patch may be
directed at will.

The telescopic extension is released for raising and lowering, and
locked by the locking screw at the rear of the up-stand.

Use the light-head handle to position the light-patch to where it
is required. In the interests of cross-infection control, avoid
touching any other part of the light.

The light-handle is coated with BioProtect®.

Locking

screw

Rocker

switch

Light-head

handle

8

4. MAINTENANCE

WARNING: Do not use strong chemical cleaning agents to sterilise the light.
Do not use any abrasive materials to clean the light.
The light is not waterproof, so do not use excessive cleaning fluid amounts.

1. Suitably protect hands.

2. Clean the lens by carefully use of a microfibre cloth or other non-abrasive optical lens

cleaning material.

Warning: Scratching or marking the lens surface can dramatically affect the optical
performance of the light and is not covered by the warranty.

Note: The following instructions refer to all surfaces of the light but excluding the
lens surface.

3. Wipe the light using lint-free cloth - pay special attention to the switch area.

4. Apply to all surfaces a 1% solution of sodium hypochlorite using a soft cloth.

5. Within 10 minutes, remove the chemical from all surfaces using a damp, soft cloth. The

chemical will cause corrosion of metal parts, if it is not thoroughly removed.

6. Apply isopropanol to the surfaces – this is an alcohol-based fluid which evaporates

without leaving any residue and can be obtained as an impregnated-cloth applicator.

Reorder: DRK4080 Microfibre cloth

9

5. FUSE REPLACEMENT

CAUTION: fuses normally blow for a reason. Investigate likely faults before changing fuses.

CAUTION: isolate the unit from the mains before accessing the fuses.

Both the live and neutral mains inputs are fused. The fuses are contained in a holder which
is part of the IEC inlet mounted on the rear panel of the mobile base.

Unplug and remove IEC cable. Using a flat-bladed screwdriver, or similar, pull forward the

‘drawer’ containing the fuses. Hinge down the front of the holder. Lift the fuses by pushing

them through the holes below.

Refit new fuses (D10496) and reverse the removal sequence, ensuring the ‘drawer’ is
pushed fully home.

'Drawer'

10

6. SPARE PARTS

CAUTION: Use only genuine ‘DARAY’ replacement lamps as other types may seriously
impair the optical performance of the product.

ITEM NO

PART NAME

TYPE

PART NO

1

Fuse

1A 20mm

D10873

2

Microfibre cloth

5 pack

DRK4080

PLEASE REFER ANY PROBLEMS INITIALLY TO YOUR DISTRIBUTOR.

DARAY Customer Services on [phone]

Or email [e-mail] for help with any problems the distributor cannot solve.

11

Returns Policy

We want you to be completely satisfied with your purchase. If you need to return goods
purchased from DARAY Ltd, please read the following information carefully.

The DARAY Ltd returns policy provides guidance on when you can return goods we have
supplied, and what you can expect from us once you do. To see our detailed returns policy
and procedure visit www.daray.co.uk/returns

TYPE OF RETURN

REMEDY

DAMAGED GOODS

Goods which are physically
damaged on delivery

We must be notified within 24 hours of receipt.

Dead On Arrival (DOA)

Goods which do not work

Goods which do not work on arrival or develop a fault
within 28 days, we will advance replace the item.

GOODS DEVELOPING A FAULT

Goods which have developed a
fault within the warranty period.

If the fault develops after 28 days, but within the
warranty period, we will initiate the returns
procedure.

NON WARRANTY

Goods which have developed a
fault outside the warranty period.

If a fault develops outside the warranty period, we will
initiate the returns procedure charges may be
applicable.

OTHER

Any situation which is not covered
by any of the above.

We will always try to help, but we cannot normally
offer a refund.

For additional clarification, please refer to our terms and conditions at

www.daray.co.uk/terms.

In a small number of cases, we may determine that a replacement would not work any
better than the original product we supplied. In such cases we will only offer a refund
rather than a replacement for qualifying returns.

Replacement bulbs and spare parts ordered on our website or from supplied part codes are
not eligible for credit. We will accept returns and exchange for the correct item.

If your purchase an item incorrectly you can return it within 14 days and it can be
exchanged for another product of equal or higher value, excluding transportation charges
incurred. Goods and packaging must be returned in their original condition. Under no
circumstances will goods be accepted for return if they are damaged, have been subjected
to improper handling or abuse or have been used.

If you send us goods that do not qualify for return, you will invalidate your claim to any
refund, and you will be obliged to compensate DARAY Ltd for the cost of return postage and
any other reasonable costs incurred processing the goods.

Your statutory rights are not affected.

IMPORTANT!

Before returning your item, you must call us on 0844 375 9000

12

WARRANTY

TERMS AND CONDITIONS OF WARRANTY

1. To qualify for this warranty you must register on www.daray.co.uk or return to Daray Ltd (Daray) the
duly completed warranty-registration form accompanying the product.

2. Daray warrants this product (excluding lamp) against faulty material and workmanship during the
period of the warranty. The period of warranty is the period stated on your warranty card and
commences on the date of purchase of the product. In the event that the product is not in good
working order Daray will provide, during the warranty period, a free repair service within the United
Kingdom. The warranty is subject to proof of purchase being provided; therefore, you should retain
your original receipt.

2.1 The repair service consists of the provision of spare parts and/or replacement products (at Daray’s
discretion) which will be provided on an exchange basis and will either be new, equivalent to new
or reconditioned. All replaced spare parts and products shall become the property of Daray.

2.2 Daray’s only obligation under this warranty is the provision of the service as set out above.

2.3 All products are returned to Daray at the customer’s cost and risk. Products to be returned should

be adequately packed. For the address to send returns to please visit www.daray.co.uk

3. Daray’s arrangements for providing service provided under this warranty may include the use of sub-
contractors.

4. This warranty does not cover damage or defects in the Product caused by or resulting from:

 Wilful neglect or negligence by anyone other than Daray;
 Improper use, storage or handling of the product;
 Use of non-Daray approved parts (such as replacement lamps) not compatible with the Product;
 Fire, accident or disaster;
 Use of non-Daray modifications other than in accordance with Daray’s instructions;

Attachment of fittings and accessories not approved by Daray;
Repairs, modifications carried out by service personnel not approved by Daray;

 Damage caused by chemical corrosion from cleaning agents not approved by Daray.
 Failure to use or install the product in accordance with the manufacturer’s instructions.

5. Nothing in this warranty shall have the effect of restricting or excluding the liability of Daray in respect of:

a) Death and personal injury caused by the negligence of Daray, or for fraud;
b) Under the Consumer Protection Act 1987 to a person who has suffered damage caused by a

defective product or to a dependant or relative of such a person;

c) Direct damage to your property caused by the proven negligence of Daray.

6. This agreement does not give any rights other than those expressly set out above and in particular, Daray will
not be responsible for any loss of income, profits or contracts or any direct or indirect consequential loss,
damage caused to or suffered by the purchaser as a direct result of this agreement.

7. This warranty is offered (subject to these terms and conditions) in addition to, and does not affect
your statutory rights.

8. Daray may disclose your details and other personal information to companies within the Daray group
including any subsidiary company or sub contractor of Daray for the purposes of performing our
obligations hereunder.

9. You must not resell outside the UK any products supplied by Daray and covered by the Export of Goods
(Control) Order 1992 (or any law that replaces it) with out obtaining all necessary licences. You also

agree not to sell the product in the UK if you know or think that the person buying the product intends
to export it without getting the necessary licences. You agree to impose similar conditions to these on
anyone you sell the product to.

10. These conditions shall in all respect be governed and construed in accordance with English law and

the exclusive jurisdiction of the English courts