DAP Touch N Foam 7565002440 User Manual

SDS Number: 00047023508 Revision Date: 9/24/2018

24 Hour Emergency Phone Numbers
Medical/Poison Control:
In U.S.: Call 1-800-222-1222

Outside U.S.: Call your local poison
control center

Transportation/National Response
Center:

Safety Data Sheet

1-800-535-5053
1-352-323-3500

NOTE: The National ResponseCenter emergency
numbers to be used only in the event of chemical
emergencies involving a spill, leak, fire, exposure or
accident involving chemicals.

IMPORTANT: Provide this information to employees, customers, and users of this product. Read this SDS before handling or disposing of this
product. This product is covered by the OSHA Hazard Communication Standard and this document has been prepared in accordance with
requirements of this standard. All abbreviated terms used in this SDS are further described in Section 16.

1. Identification

This Safety Data Sheet is available in American Spanish upon request.

Los Datos de Serguridad pueden obtenerse en Espanol si lo riquiere.

Product Name:

Product UPC Number:

Product Use/Class: Foam Sealant

Manufacturer:

Touch N Foam All-Purpose Polyurethane
Foam Sealant Cream

075650024201, 075650287309

DAP Foam, Inc.
307 Integram Drive
Pacific, MO 63069
888-327-8477 (non - emergency matters)

SDS Coordinator: [e-mail]

Emergency Telephone:
Transportation: 1-800-535-5053
1-352-323-3500
Poison Control: 1-800-222-1222

2. Hazards Identification

Revision Date:

Supercedes Date:

SDS No:

Preparer:

9/24/2018

2/2/2018

00047023508

Regulatory and Environmental
Affairs

Page 1 / 8

SDS Number: 00047023508 Revision Date: 9/24/2018

GHS Classification

Carc. 2, Comp. Gas, Eye Irrit. 2, Eye Irrit. 2B, Fl Aer, 1, Resp. Sens. 1, Skin Irrit. 2, Skin Sens. 1, STOT RE 1, STOT RE 2, STOT
SE 3 RTI

Symbol(s) of Product

Signal Word

Danger

Possible Hazards

8% of the mixture consists of ingredients of unknown acute toxicity

GHS HAZARD STATEMENTS

Flammable Aerosol, category 1 H222 Extremely flammable aerosol.
Compressed Gas H280 Contains gas under pressure; may explode if heated.
Skin Irritation, category 2 H315 Causes skin irritation.
Skin Sensitizer, category 1 H317 May cause an allergic skin reaction.
Eye Irritation, category 2 H319 Causes serious eye irritation.
Acute Toxicity, Inhalation, category 4 H332 Harmful if inhaled.
Respiratory Sensitizer, category 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
STOT, single exposure, category 3, RTI H335 May cause respiratory irritation.
Carcinogenicity, category 2 H351 Suspected of causing cancer.
STOT, repeated exposure, category 1 H372 Causes damage to organs through prolonged or repeated exposure.
STOT, repeated exposure, category 2 H373 May cause damage to organs through prolonged or repeated exposure.
Eye Irritation, category 2B H320 Causes eye irritation

GHS LABEL PRECAUTIONARY STATEMENTS

P201 Obtain special instructions before use.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No

smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P281 Use personal protective equipment as required.
P284 [In case of inadequate ventilation] wear respiratory protection.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if

present and easy to do. Continue rinsing.
P308+P313 IF exposed or concerned: Get medical advice/attention.
P312 Call a POISON CENTER or doctor/physician if you feel unwell.
P321 Specific treatment (see … on this label).
P332+P313 If skin irritation occurs: Get medical advice/attention.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/attention.
P342+P311 If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician.
P362 Take off contaminated clothing.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P410+P403 Protect from sunlight. Store in a well-ventilated place.
P410+P412 Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.
P501 Dispose of contents/container to …

GHS SDS PRECAUTIONARY STATEMENTS

P270 Do no eat, drink or smoke when using this product.

Page 2 / 8

SDS Number: 00047023508 Revision Date: 9/24/2018

H315-317-319-332-334-335-351

-373

H315-317-319-332-334-335-351

-373

Propan-2-oxide, 1,3-dichloro-, phosphate

5-10

GHS07-GHS08

H302-351

Dimethyl ether

5-10

GHS02

H220

Isobutane

3-7

GHS02-GHS07

H220-332-336

Propane

1-5

GHS02-GHS07

H220-332-336

P363 Wash contaminated clothing before reuse.

3. Composition/Information on Ingredients

Chemical Name CAS-No. Wt. % GHS Symbols GHS Statements

Polymeric diphenylmethane diisocyanate 9016-87-9 15-40 GHS07-GHS08

4,4’-Methylene diphenyl diisocyanate (MDI) 101-68-8 10-30 GHS07-GHS08

13674-87-8
115-10-6
75-28-5
74-98-6

The text for GHS Hazard Statements shown above (if any) is given in the "Other information" Section.

4. First-aid Measures

FIRST AID - INHALATION: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is

experienced, get medical attention immediately.

FIRST AID - SKIN CONTACT: Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist. Use a rag to
remove excess foam from skin and remove contaminated clothing. Use of a solvent, such as acetone (nail polish remover) or mineral
spirits, may help in removing uncured foam residue from clothing or other surfaces (avoid eye contact). Cured foam may be physically
removed by persistent washing with soap and water. If irritation develops, use mild skin cream. If irritation persists, obtain medical
attention.

FIRST AID - EYE CONTACT: In case of contact, immediately flush eyes with large quantities of water for at least 15 minutes until
irritation subsides. Get medical attention immediately.

FIRST AID - INGESTION: If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.

5. Fire-fighting Measures

UNUSUAL FIRE AND EXPLOSION HAZARDS: Closed containers may burst if exposed to extreme heat or fire. Containers may

explode if exposed to extreme heat. Empty containers retain product residue (liquid and/or vapor). Vapor can ignite potentially
causing an explosion.

SPECIAL FIREFIGHTING PROCEDURES: Wear self-contained breathing apparatus pressure-demand (NIOSH approved or
equivalent) and full protective gear. Use water spray to cool exposed surfaces.

EXTINGUISHING MEDIA: Carbon Dioxide, Dry Chemical, Foam, Water Fog

6. Accidental Release Measures

ENVIRONMENTAL MEASURES: No Information

STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: NOTE: Review fire hazards before proceeding with clean up.

Immediately eliminate sources of ignition. Keep people away from and upwind of spill/leak. Contain spilled material and remove with
inert absorbent. Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal
regulations. Prevent product from entering drains. Soak up with inert absorbent material and dispose of as hazardous waste. Use
personal protective equipment as necessary. Read all product instructions before using. Personal protective equipment should
include impervious gloves, protective eye wear, and suitable work clothes. Scrape up dried material and place into containers.
Uncured product is very sticky, so carefully remove the bulk of the foam by scraping it up and then immediately remove residue with a
rag and solvent such as polyurethane cleaner, mineral spirits, acetone (nail polish remover), paint thinner, etc. Once the product has
cured, it can only be removed physically by scraping, buffing, etc. Dispose as plastic waste (foam plastic) in accordance with all
applicable guidelines and regulations.

7. Handling and Storage

HANDLING: KEEP OUT OF REACH OF CHILDREN!DO NOT TAKE INTERNALLY. Remove all sources of ignition. Make sure

nozzle is directed away from yourself prior to discharge. Keep away from open flames, hot surfaces and sources of ignition. Avoid
heat, sparks and open flames. Wear appropriate personal protection. Avoid breathing vapor and contact with eyes, skin and
clothing. Use only with adequate ventilation. Ensure fresh air entry during application and drying. Do not breathe dust. While dry
sanding, use of a NIOSH-approved dust mask is recommended. Empty containers retain product residue (liquid and/or vapor). Vapor
can ignite potentially causing an explosion. Wash thoroughly after handling. Contains isocyanates. See information supplied by the
manufacturer. Persons allergic to isocyanates, and particularly those suffering from asthma or other respiratory conditions, should
not work with isocyanates.

STORAGE: Store away from sources of ignition and heat. Protect material from direct sunlight. Keep containers tightly closed in a
dry, cool and well-ventilated place. Do not store at temperatures above 120 degrees F. Store containers away from excessive heat

Page 3 / 8