DAP Products 7079800173, 7079800156, 7079800157, 7079827500, 7079800158 User Manual
SDS Number: 00030406004 Revision Date: 3/15/2018
24 Hour Emergency Phone Numbers
Medical/Poison Control:
In U.S.: Call 1-800-222-1222
Outside U.S.: Call your local poison
control center
Transportation/National Response
Center:
Safety Data Sheet
1-800-535-5053
1-352-323-3500
NOTE: The National ResponseCenter emergency
numbers to be used only in the event of chemical
emergencies involving a spill, leak, fire, exposure or
accident involving chemicals.
IMPORTANT: Provide this information to employees, customers, and users of this product. Read this SDS before handling or disposing of this
product. This product is covered by the OSHA Hazard Communication Standard and this document has been prepared in accordance with
requirements of this standard. All abbreviated terms used in this SDS are further described in Section 16.
1. Identification
This Safety Data Sheet is available in American Spanish upon request.
Los Datos de Serguridad pueden obtenerse en Espanol si lo riquiere.
Product Name: DAP RapidFuse Adhesive Revision Date:
Product UPC Number:
Product Use/Class: Adhesive
Manufactured For
070798001558, 070798001565,
070798001572, 070798001589,
070798001701, 070798001732
DAP Products Inc.
2400 Boston Street Suite 200
Baltimore, MD 21224-4723
888-327-8477 (non - emergency matters)
SDS Coordinator: MSDS@dap.com
Emergency Telephone: 1-800-535-5053,
1-352-323-3500, 1-800-222-1222
Supercedes Date:
SDS No:
Preparer:
2. Hazards Identification
3/15/2018
8/8/2016
00030406004
Regulatory and Environmental
Affairs
EMERGENCY OVERVIEW: WARNING!Combustible liquid and vapor. Keep container closed and away from heat, sparks, and open
flame. Store away from caustics and oxidizers. Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of
children. May cause skin irritation.
Page 1 / 6
SDS Number: 00030406004 Revision Date: 3/15/2018
75-100
GHS07
2.5-10
GHS07
1.0-2.5
No Information
GHS Classification
Eye Irrit. 2, Skin Irrit. 2, STOT SE 3 RTI
Symbol(s) of Product
Signal Word
Warning
Possible Hazards
6% of the mixture consists of ingredients of unknown acute toxicity
GHS HAZARD STATEMENTS
Skin Irritation, category 2 H315 Causes skin irritation.
Eye Irritation, category 2 H319 Causes serious eye irritation.
STOT, single exposure, category 3, RTI H335 May cause respiratory irritation.
GHS LABEL PRECAUTIONARY STATEMENTS
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
P312 Call a POISON CENTER or doctor/physician if you feel unwell.
P321 Specific treatment (see … on this label).
P332+P313 If skin irritation occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/attention.
P362 Take off contaminated clothing.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/container to …
3. Composition/Information on Ingredients
Chemical Name CAS-No. Wt. % GHS Symbols GHS Statements
7085-85-0
106-79-6
68909-20-6
The text for GHS Hazard Statements shown above (if any) is given in the "Other information" Section.
4. First-aid Measures
FIRST AID - INHALATION: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is
experienced, get medical attention immediately.
FIRST AID - SKIN CONTACT: Do not pull bonded skin apart. Soak in warm soapy water. Gently peel apart using a blunt object such
as spoon.
FIRST AID - EYE CONTACT: If the eye is bonded shut, apply warm water with a wet pad to release the eyelashes. Adhesive will
bond to eye protein and will cause the eye to periodically shed tears. This will help debond the adhesive. Keep eye covered until
debonding is complete. Do not force eye open. Solid particles of cyanoacrylate may be trapped behind the eyelids and cause
abrasive damage. Seek medical attention.
FIRST AID - INGESTION: Make sure airways are clear. Adhesive will immediately polymerize in mouth and will be impossible to
swallow. Saliva will slowly separate the adhesive from mouth.
5. Fire-fighting Measures
UNUSUAL FIRE AND EXPLOSION HAZARDS: Vapor from this material will readily ignite at temperatures above 150 degrees F if an
ignition source is present. Vapors may form an explosive mixture with air at temperatures above 150 degrees F. Eliminate sources of
Page 2 / 6
Loading...