You have bought a great, innovative product from DAP Audio.
The DAP Audio DJ Set brings excitement to any venue. Whether you want simple plug-&-play action or a
sophisticated show, this product provides the effect you need.
You can rely on DAP Audio, for more excellent audio products.
We design and manufacture professional audio equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
You can get some of the best quality, best priced products on the market from DAP Audio.
So next time, turn to DAP Audio for more great audio equipment.
Always get the best -- with DAP Audio !
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
SAFETY INSTRUCTIONS
Every person involved with the installation, operation and maintenance of this system have to:
- be qualified
- follow the instructions of this manual
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dan
Before you initial start-up, please make sure that there is no damage caused by transportation. Should there
be any, consult your dealer and do not use the system.
erous electric shock when touching the wires!
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow
the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the system are not subject to warranty.
This system contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the system.
•Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
• Never remove warning or informative labels from the unit.
• Never use anything to cover the ground contact.
• Do not forget to attach rubber belt to motor for correct operation.
• Do not place the unit in a location where it will be exposed to direct sunlight or near a heating
appliance.
• Do not place the unit in a location where it will be exposed to dust.
• Do not insert objects into air vents.
• Do not connect this system to a dimmerpack.
• Do not connect the AC power plug before assembly has been completed.
• Do not switch the system on and off in short intervals, as this would reduce the system’s life.
• Do not open this device.
• Only use system indoor, avoid contact with water or other liquids.
• Avoid flames and do not put close to flammable liquids or gases.
• Always disconnect power from the mains, when system is not used. Only handle the power-cord by
the plug. Never pull out the plug by tugging the power-cord.
•Make sure you don’t use the wrong kind of cables or defective cables.
2
• Make sure that the signals into the mixer are balanced, otherwise hum could be created.
• Make sure you use DI boxes to balance unbalanced signals; All incoming signals should be clear.
• Make sure that the available voltage is not higher than stated on the rear panel.
• Make sure that the power-cord is never crimped or damaged. Check the system and the power-cord
from time to time.
• Make sure that there is sufficient room on all sides of the system for air circulation
• Always operate the unit with the AC ground wire connected to the electrical system ground.
• Always turn off the power when connecting or disconnecting.
• Prevent distortion! Make sure that all components connected have sufficient power ratings.
Otherwise distortion will be generated because the components are operated at their limits.
•Avoid ground loops! Always be sure to connect the power amps and the mixing console to the same
electrical circuit to ensure the same phase!
•If system is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
•If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your system. Leave the
system switched off until it has reached room temperature.
• Keep this user’s manual for future consultation.
• Repairs, servicing and electric connection must be carried out by a qualified technician.
• WARRANTY: Till one year after date of purchase.
OPERATING DETERMINATIONS
If this system is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, etc.
You endanger your own safety and the safety of others!
Improper installation can cause serious damage to people and property !
3
Description of the device
Features
The DJ Set is a professional plug and play DJ Set containing:
• 2x belt driven turntables T-500 with pitch control, quick start/stop, strong motor and belt brake
• 1x DJ mixer with user replaceable crossfader, 2 phono, 2 line, 1 microphone input, gain, treble and Bass
controls on channels
• 1x DH-105 Headphone
Overview T-500
1. 45-rpm Adapter11. Tonearm Clamp
2. Turntable Platter12. Cueing Lever
3. Center Spindle13. Anti-skate Knob
4. Strobe Dots14. Counterweight
5. On/Off Switch15. Spare phono cartridge slot
6. Start/Stop Button16. Hinge for dust cover
7. Headshell17. Stylus-Pressure Ring
8. Speed Select Buttons
9. Pitch Control Slider) located on Center detent
10. Tonearm
Fig. 1
4
Loading...
+ 12 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.