Page 1
PRE-202
Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands
Ordercode: D1533
MANUAL
ENGLISH
2 Channel Microphone Preamp
Page 2
PRE-202 2 Channel Microphone Preamp
D1533
Controls the input gain, channel 1.
Controls the input gain, channel 2.
Press the LOW CUT switch to activate the high-pass filter which blends out low-frequency noise (75
Hz, 12 dB/octave).
Phantom power is used for operating a condensor microphone.
Power on/off switch
Power adapter connector
Input 1, Balanced combo-type input for connecting low impedance microphones.
Output 1, Balanced XLR output connector.
Input 2, Balanced combo-type input for connecting low impedance microphones.
Output 2, Balanced XLR output connector
Keep this device away from rain and moisture!
Warning
Every person involved with the installation, operation and maintenance of this system has to:
be qualified
follow the instructions of this manual
Only use the supplied DAP audio adapter.
CAUTION!
Description
The PRE-202 is a 2 channel microphone solution, that combines high quality low noise preamps with a 48
volt phantom power supply. It also offers gain settings and a low cut function, that will help you to
eliminate unwanted stage rumble. The 48-volt phantom power supply is capable of powering almost any
condenser microphone. The PRE-202 is the ideal solution in an audio system, without phantom power,
where the use of normal or condenser microphones is desired.
Switchable Phantom power
Switchable low cut
Level control
Low noise preamps
Overview
1
Page 3
PRE-202 2 Channel Microphone Preamp
D1533
Connection Example
2
Page 4
PRE-202 2 Channel Microphone Preamp
Frequency Response:
20Hz-20KHz
Inputs:
XLR/Jack Combo
Outputs:
XLR male
Input sensitivity:
-50dBV
Max input voltage:
-4 dBu
Max output voltage:
+22 dBu
Power supply:
18V AC (adapter included)
Dimensions:
53x158x135 mm (HxWxD)
Weight:
0,67 Kg
©2013 DAP Audio
Dimensions
Specifications
Loading...