PA-250 V1
Highlite Interna t ional B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands
Ordercode: D6160
MANUAL
ENGLISH
PA-500
Ordercode: D6160
Table of contents
Warning ............................................................................................................................................................................... 2
Safety Instructions ......................................................................................................................................................... 2
Operating Determinations .......................................................................................................................................... 4
Connection with the mains......................................................................................................................................... 4
Return Procedure .......................................................................................................................................................... 4
Claims .............................................................................................................................................................................. 4
Description of the device ................................................................................................................................................. 5
Frontside.......................................................................................................................................................................... 5
Backside ......................................................................................................................................................................... 6
Installation ........................................................................................................................................................................... 7
Set Up and Operation ....................................................................................................................................................... 7
Connecting Inputs ........................................................................................................................................................ 7
Connecting Outputs .................................................................................................................................................... 8
Low Impedance Outputs ......................................................................................................................................... 8
High Impedance Outputs ........................................................................................................................................ 8
Connection Cables ........................................................................................................................................................... 9
Maintenance ....................................................................................................................................................................10
Replacing the Fuse .....................................................................................................................................................10
Troubleshooting ...............................................................................................................................................................10
Product Specifications ....................................................................................................................................................11
Notes ..................................................................................................................................................................................12
1
PA-500
Ordercode: D6160
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a device must be
returned to the factory, it is important that the device is returned in the original factory box and packing.
Your shipment includes:
• DAP Audio PA-250
• Power cable (1,5 m)
• User manual
Safety Instructions
Every person involved with the installation, operation and maintenance of this system has to:
• be qualified
• follow the instructions of this manual
Before you initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the system.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the system are not subject to
warranty.
This system contains no user-serviceable parts. Refer servicing to qualified technicians only.
2
PA-500
Ordercode: D6160
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the system.
• Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
• Never remove warning or informative labels from the unit.
• Never use anything to cover the ground contact.
• Never leave any cables lying around.
• Do not insert objects into air vents.
• Do not connect this system to a dimmerpack.
• Do not switch the system on and off in short intervals, as this would reduce the system’s life.
• Do not open the device and do not modify the device.
• Do not drive the inputs with a signal level bigger, than required to drive the equipment to full output.
• Do not plug mics into the console (or stagebox) while phantom power is on. Also mute the monitor /
Pa system when turning phantom power on or off. Allow the system to adjust for a couple of
seconds, before setting the input gains.
• Only use system indoors, avoid contact with water or other liquids.
• Avoid flames and do not put close to flammable liquids or gases.
• Always disconnect power from the mains, when system is not used. Only handle the power cord by
the plug. Never pull out the plug by tugging the power cord.
• Always operate the unit with the AC ground wire connected to the electrical system ground.
• Make sure you do not use the wrong kind of cables or defective cables.
• Make sure that the signals into the mixer are balanced, otherwise hum could be created.
• Make sure you use DI boxes to balance unbalanced signals; All incoming signals should be clear.
• Make sure that the available voltage is not higher than stated on the rear panel.
• Make sure that the power cord is never crimped or damaged. Check the system and the power
cord from time to time.
• Please turn off the power switch, when changing the power cord or signal cable, or select the input
mode switch.
• Extreme frequency boosts in connection with a high input signal level may lead to overdriving your
equipment. Should this occur, it is necessary to reduce the input signal level by using the INPUT
control.
• To emphasize a frequency range, you do not necessarily have to move its respective control
upward; try lowering surrounding frequency ranges instead. This way, you avoid causing the next
piece of equipment in your sound path to overdrive. You also preserve valuable dynamic reserve
(“headroom”).
• Avoid ground loops! Always be sure to connect the power amps and the mixing console to the
same electrical circuit to ensure the same phase!
• If system is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
• If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your system. Leave the
system switched off until it has reached room temperature.
• If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Dap Audio dealer for service.
• Repairs, servicing and electric connection must be carried out by a qualified technician.
• For replacement use fuses of same type and rating only.
• WARRANTY: Till one year after date of purchase.
3
PA-500
Ordercode: D6160
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NEUTRAL
YELLOW/GREEN
GREEN
GREEN
PROTECTIVE GROUND
Return Procedure
Operating Determinations
This system is not designed for permanent operation. Consistent operation breaks will ensure that the
system will serve you for a long time without defects.
If this system is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, etc.
You endanger your own safety and the safety of others!
Improper installation can cause serious damage to people and property !
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
Make sure that the device is always connected properly to the earth!
Improper installation can cause serious damage to people and property!
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail aftersales@highlite.nl
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name
02) Your address
03) Your phone number
04) A brief description of the symptoms
and request an RMA prior to shipping the fixture.
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any shortcomings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.
4
PA-500
Ordercode: D6160
• Dimensions:
330 x 482 x 95 mm (LxWxH)
19” x 2HE
Fig. 01
Description of the device
Features
The DAP PA-250 is a 250W, 100V plain amplifier. It is a reliable workhorse that can be used for many
applications. Inputs can be connected with terminals, balanced XLR or unbalanced RCA connectors.
The loop through is available to connect external audio processing, like equalizing enhancing or
feedback killers. The PA-500 can extend a DAP 100V PA system or be used for mobile rental applications.
It can also be combined with line mixers in a situation where 100V is an extension of a commercial audio
installation.
USP
• Power consumption: 250W
• 100V & 8Ω: Terminals
• Line input: RCA, XLR & terminals
• Loop through: RCA
• Headphones: 6,3 mm jack
Inputs
• 1 x Line: RCA, XLR & terminals
General
• Power supply: 230V AC, 50 Hz
• Back-up power supply: 24V DC
• Power consumption: 500W
• Power connection: IEC power connector
• Fuse: T4AL/250V
• Weight: 12 kg
Frontside
Power switch ON/OFF
Press the button to switch the device ON/OFF.
VU meter
The clip LED indicates peak levels at the output of the amplifier. If the red LED frequently blinks or
lights continuously, the output is likely to enter clipping. If this happens, we strongly suggest
decreasing the signal source volume.
Headphones 6,3 mm jack IN
Use this connector to connect 6,3 mm jack headphones.
5
PA-500
Ordercode: D6160
Fig. 02
Backside
Cooling fan
Do not obstruct the air inlet.
IEC power connector 230V AC + fuse T4AL/250V
Connect the device to the appropriate power supply.
AC selector
Before connecting your PA-250 to the mains, make sure that the AC selector is set to the proper
voltage which is used in your country. In case of doubt, consult a technician.
100V/8Ω terminal connector OUT
If you connect a 100V speaker, connect the main feed cable to the 100V terminal and the common
cable to the 0 terminal.
If you connect a low impedance speaker, then connect the main feed cable to the 8Ω terminal and
the common cable to the 0 terminal.
NOTE: Do not connect the 100V and 8Ω speakers at the same time.
24V DC IN terminal connector
This input can be used in mobile applications, such as boats where 120 or 230V AC is not available or
in applications that must continue to operate in case of power shortage. When a 24V DC battery is
connected, the unit will operate on the supplied DC voltage. The amplifier has a built-in charger,
which charges the connected battery.
Unbalanced RCA line level OUT
Use this connector to provide a dedicated output source for another device.
Loop through RCA IN/OUT
Loop through input and output connections allow external sound processing equipment to be
connected between the preamplifier and the power amplifier stages.
Unbalanced RCA line level IN
Use this connector to connect unbalanced signal source.
XLR balanced connector IN
Use this connector to connect balanced signal source.
6
PA-500
Ordercode: D6160
Fig. 03
Always turn off and disconnect the amplifier from mains voltage before making audio
connections. The attenuators should always be turned down during power-up.
100V terminal input connector
Connect the main feed cable from your 100V signal source to the 100V terminal. Connect the
common cable to the 0 terminal.
Volume control
Turn the control to adjust volume.
Installation
Remove all packing materials from the PA-250. Check if all foam and plastic padding is removed. Secure
the equipment into a 19" rack if preferred. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 115V specification product on 230V power, or vice versa.
Before powering up the first time, make sure that the AC selector is set to the proper
voltage!
Damage caused by connecting the amplifier to improper AC voltage is not covered
by any warranty!
Connecting Inputs
Use the XLR input connector on the rear to supply audio signals to your DAP Audio PA-250 amplifier. The
RCA connectors accept unbalanced audio connections while the XLR connector accepts balanced
audio connections.
7
PA-500
Ordercode: D6160
Fig. 04
Fig. 05
In a low impedance system, the total speaker load should always match the amplifier’s
least equal to the power of the amplifier, to avoid speaker damage.
The total power of all speakers summed together should never exceed the total power of
the amplifier in a 70V or a 100V system!
Connecting Outputs
Speakers are connected by means of terminal connectors. See the examples below.
Low Impedance Outputs
You can use as many speakers as you want as long as the total impedance matches the amplifiers
output.
Example 1: Using the 8Ω output with an 8Ω speaker.
Example 2: Using the 8Ω output with two 4Ω speakers.
impedance, in order not to overload the amplifier. The total speaker power should be at
High Impedance Outputs
While using either the 70V outputs or the 100V outputs, note that all speakers should be wired in parallel.
8
PA-500
Ordercode: D6160
Unbalanced
Balanced
Connection Cables
Take care of your cables, always holding them by the connectors and avoiding knots and twists when
coiling them: This gives the advantage of increasing their life and reliability. Periodically check your
cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely
by using unsuitable or faulty cables.
For these applications the unit provides 1/4" TRS and XLR connectors to easily interface with most
professional audio devices. Follow the configuration examples below for your particular connection.
9
PA-500
Ordercode: D6160
Maintenance
The DAP Audio PA-250 requires almost no maintenance. However, you should keep the unit clean.
Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in
liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Replacing the Fuse
Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the
fuse burns out, the product will not function whatsoever. If this happens, follow the directions below.
01) Unplug the unit from electric power source.
02) Insert a screwdriver into the slot in the fuse cover. Gently pry up the fuse cover. The fuse will come
out.
03) Remove the used fuse. If brown or unclear, it is burned out.
04) Insert the replacement fuse into the holder where the old fuse was. Reinsert the fuse cover. Be sure to
use a fuse of the same type and specification. See the product specification label for details.
Troubleshooting
DAP Aud i o PA-250
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
01) If the device does not operate properly, unplug the device.
02) Check power from the wall, all cables, connections, etc.
03) Replace the fuse. See page 10 for replacing the fuse.
04) If all of the above appears to be O.K., plug the unit in again.
05) If nothing happens after 30 seconds, unplug the device.
06) Return the device to your DAP Audio dealer.
10
PA-500
Ordercode: D6160
• Dimensions:
330 x 482 x 95 mm (LxWxH)
19” x 2HE
Product Specifications
USP
• Power consumption: 250W
• 100V & 8Ω: Terminals
• Line input: RCA, XLR & terminals
• Loop through: RCA
• Headphones: 6,3 mm jack
Inputs
• 1 x Line: RCA, XLR & terminals
General
• Power supply: 230V AC, 50 Hz
• Back-up power supply: 24V DC
• Power consumption: 500W
• Power connection: IEC power connector
• Fuse: T4AL/250V
• Weight: 12 kg
Design and product specifications are subject to change without prior notice.
11
Website: www.Dap-audio.info
Email: service@highlite.nl
PA-500
Ordercode: D6160
Notes
12
PA-500
Ordercode: D6160
13
PA-500
Ordercode: D6160
14
©2016 DAP Audio
Loading...