DAPAudio AS-8 User Manual

AS-8 V1

Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands

Ordercode: D1904

MANUAL

ENGLISH

AS-8

Ordercode: D1904

Table of contents

Warning ............................................................................................................................................................................... 2

Safety Instructions ......................................................................................................................................................... 2

Operating Determinations .......................................................................................................................................... 4

Connection with the mains......................................................................................................................................... 4

Return Procedure .......................................................................................................................................................... 5

Claims .............................................................................................................................................................................. 5

Description of the device ................................................................................................................................................. 6

Frontside.......................................................................................................................................................................... 6

Backside ......................................................................................................................................................................... 7

Installation ........................................................................................................................................................................... 7

Set Up and Operation ....................................................................................................................................................... 8

MAIN Section ................................................................................................................................................................. 8

Splitter Mode .................................................................................................................................................................. 8

Mixer Mode .................................................................................................................................................................... 8

Mixer ................................................................................................................................................................................ 9

Splitter ............................................................................................................................................................................10

4-channel Stereo Splitter ........................................................................................................................................10

Matching Amplifier .....................................................................................................................................................11

Connection Cables .........................................................................................................................................................12

Maintenance ....................................................................................................................................................................12

Replacing the Fuse .....................................................................................................................................................13

Troubleshooting ...............................................................................................................................................................13

Product Specifications ....................................................................................................................................................13

1

AS-8

Ordercode: D1904

Warning

Unpacking Instructions

Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a device must be
returned to the factory, it is important that the device is returned in the original factory box and packing.

Your shipment includes:

 DAP Audio AS-8
 IEC power cable (1,5 m)
 User manual

Safety Instructions

Every person involved with the installation, operation and maintenance of this system has to:

 be qualified
 follow the instructions of this manual

Before you initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the system.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the system are not subject to
warranty.

This system contains no user-serviceable parts. Refer servicing to qualified technicians only.

2

AS-8

Ordercode: D1904

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the system.

 Never let the power cord come into contact with other cables! Handle the power cord and all

connections with the mains with particular caution!

 Never remove warning or informative labels from the unit.
 Never use anything to cover the ground contact.
 Never leave any cables lying around.
 Do not insert objects into air vents.
 Do not connect this system to a dimmerpack.
 Do not switch the system on and off in short intervals, as this would reduce the system’s life.
 Do not open the device and do not modify the device.
 Do not drive the inputs with a signal level higher than required to drive the equipment to full output.
 Only use system indoors, avoid contact with water or other liquids.
 Avoid flames and do not put close to flammable liquids or gases.
 Always disconnect power from the mains, when system is not used. Only handle the power cord by

the plug. Never pull out the plug by tugging the power cord.

 Always operate the unit with the AC ground wire connected to the electrical system ground.
 Make sure you do not use the wrong kind of cables or defective cables.
 Make sure that the signals into the mixer are balanced, otherwise hum could be created.
 Make sure that you use DI boxes to balance unbalanced signals; All incoming signals should be

clear.

 Make sure that the available voltage is not higher than stated on the rear panel.
 Make sure that the power cord is never crimped or damaged. Check the system and the power

cord from time to time.

 Please turn off the power switch, when changing the power cord or signal cable.
 Extreme frequency boosts in connection with a high input signal level may lead to overdriving your

equipment. Should this occur, it is necessary to reduce the input signal level by using the input
control.

 To emphasize a frequency range, you do not necessarily have to move its respective control

upwards; try lowering surrounding frequency ranges instead. This way, you avoid causing the next
piece of equipment in your sound path to overdrive. You also preserve valuable dynamic reserve
(“headroom”).

 Avoid ground loops! Always be sure to connect the power amps and the mixing console to the

same electrical circuit to ensure the same phase!

 If system is dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.

 If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do not

switch it on immediately. The arising condensation water might damage your system. Leave the
system switched off until it has reached room temperature.

 If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit securely

(preferably in the original packing material), and return it to your Dap Audio dealer for service.

 Repairs, servicing and electric connection must be carried out by a qualified technician.
 For replacement use fuses of same type and rating only.
 WARRANTY: Till one year after date of purchase.

3

AS-8

Ordercode: D1904

International

EU Cable

UK Cable

US Cable

Pin

L

BROWN

RED

YELLOW/COPPER

PHASE

N

BLUE

BLACK

SILVER

NEUTRAL

YELLOW/GREEN

GREEN

GREEN

PROTECTIVE GROUND

Operating Determinations

This system is not designed for permanent operation. Consistent operation breaks will ensure that the
system will serve you for a long time without defects.

If this system is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, etc.

You endanger your own safety and the safety of others!

Improper installation can cause serious damage to people and property !

Connection with the mains

Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.

Make sure that the device is always connected properly to the earth!

Improper installation can cause serious damage to people and property!

4