Dap 7141-62 User Manual

Dap Dual Wireless

Charging Pad

Instruction Manual

7141-62

Features:

1.

LED Indicator Light (A)

2.

Charging Pad Surface (A)

3.

Charging Pad Surface (B)

4.

LED Indicator Light (B)

5.

USB Input Cable

What’s included:

1 x Dual Wireless Charger
1 x Instruction Manual

Tech Specications

Input: 5V/2.1A

•

Wireless Output: 5V/1A

•

INSTRUCTIONS:

1.

Use A Certied USB Plug Adapter:

a.

Connect the provided USB cable to the
USB plug adapter.

b.

LED Indicator will turn Green when ready
to charge.

2.

Charging Mobile Devices:

a.

Ensure that your phone or tablet supports
wireless charging. It will be listed in the
manufacturer’s specications. (See also
the Tech Specications in this manual).

b.

Place the enabled device on one of the
surfaces of the wireless charging pad. The
device should display charging indicator.

c.

When completely charged, remove the
device from the charging pad.

*

Note: While charging, the indicator light will
illuminate Blue.

SAFETY PRECAUTIONS:

Read all the instructions before using the
product.

WARNING-When using this product, basic

•

precautions should always be followed:
Read all the instructions before use.

1.

Never store or use this product in

2.

temperatures below 32°F (0°C) or above
115°F (45°C).
Do not overcharge your phone. The

3.

unit may become hot under excessive
use. Remove your phone once it is fully
charged. Never charge your phone for
more than 7 hours at a time.
The unit will only achieve full performance

4.

after 2 or 3 completed charge and
discharge cycles.
To reduce the risk of injury, close

5.

supervision is required when the product is
used near children.

6.

Do not expose the device to moisture.

7.

Do not use the device in excess of its
output rating. Overload outputs above the
rating may result in a risk of re or injury.

8.

Do not use the device if damaged or
modied.

9.

Damaged or modied batteries may exhibit
unpredictable behaviour resulting in re,
explosion or risk of injury.

10.

Do not disassemble the device. For repairs,
seek a qualied service professional.
Incorrect reassembly may result in a risk of
re or injury.

11.

Do not expose the device to re or
excessive temperatures. Exposure to re
or temperatures above 104°F (40°C) may
result in explosion.

12.

To ensure product safety, ensure that
qualied service professionals use only
identical replacement parts.

WIRELESS CHARGING ENABLED
DEVICES:

iPhone 8/8Plus/Samsung Galaxy S8/S8+/
S7/S7 Edge/S6/S6 Edge, Nokia Lumia
1020/920/928, HTC 8X, HTC Droid DNA, HTC
Rzound, HTC Incredibly 4G LTE, Moto Droid
Turbo, Motorola Moto 360 Smart Watch, Moto
Droid Maxx, Droid Mini, Google Nexus 6/4/5/7
(2013), LG D1L, LG LTE2, LG G2 (Verizon),
Blackberry Z30 (Verizon)

FCC Statement:

This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
This device may not cause harmful

(1)

interference, and
This device must accept any interference

(2)

received, including interference that may
cause undesired operation.

Warning:

*

Changes or modications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.

MADE IN CHINA