Danuser HP-3060 User Manual

PROFESSIONAL

D A N G E R

AUGER SERIES

MODELS

2545 Hex

3060 Hex
HP-2545 Hex
HP-3060 Hex

Si no entiende ingles, se prefiere que
busque a alguien que interprete las
instrucciones para usted.

Owner:

Date Purchased:

Model #: Serial #:

Manual #: 9MPROL2455824

Operator’s Manual

Danuser LLC

500 E. 3rd St.

P.O. Box 368

Fulton, MO 65251

Tel: [phone] Fax: [phone]

E-mail: [e-mail]
Website: www.danuser.com

Dear Owner/Operator,

Thank you for purchasing this Danuser Hydraulic Earth Auger. We appreciate your business.

Your safety as an operator of our product is very important to us. Therefore, before you
assemble, install, operate, or maintain your Danuser Earth Auger, read and understand this
manual thoroughly. If there is anything you do not understand, immediately contact your
dealer, or contact our factory direct.

Tel: [phone]
Fax: [phone]
E-mail: [e-mail]

Your satisfaction in the performance and longevity of our product is also very important to us
and can be prolonged by proper assembly, installation, operation, and maintenance as instructed
in this manual.

Thank you again for your business and for your trust in our product. Please feel free to
contact us at any time for further assistance.

Sincerely,

Danuser LLC

500 E. 3rd St., P.O. Box 368, Fulton, MO 65251

Tel: [phone] Fax: [phone]

E-mail: [e-mail] Website: www.danuser.com

Foreword

WARNING

D A N G E R

D A N G E R

NOTE

Please read this manual thoroughly!

Before you assemble, install, operate, or maintain your Danuser Earth Auger, read this
manual thoroughly. If there is anything you do not understand, immediately contact your
dealer, or call our factory direct at [phone]. Powered equipment can be dangerous
if not assembled, installed, operated, or maintained properly.

Warranty Registration

To activate your warranty coverage and to provide you with efficient customer service,
please fill out your WARRANTY REGISTRATION FORM. This form is included in your
unit’s paperwork package. If you did not complete a WARRANTY REGISTRATION
FORM or did not receive one, please call Danuser LLC. Your satisfaction with our product
and your safety as a user of our product are both very important to us.

Symbols

This SAFETY ALERT symbol identifies important safety messages. Carefully read
each safety message that follows. Failure to understand and obey a safety message,

or recognize a safety hazard, could result in injury or death to you or others around
you. The operator is ultimately responsible for the safety of himself, as well as others, in
the operating area of the earth auger.

Symbol

This is important information for proper use of this
equipment. Failure to comply may lead to premature
equipment failure.

Failure to follow these instructions may cause damage
to the implement or the vehicle, or minor personal
injury.

Failure to follow these instructions may result in
personal injury or death.

Immediate hazard! Failure to understand and obey this
warning is likely to result in personal injury or death.

Page

Meaning

Table of

Contents

Letter to the Owner/Operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Drive Unit Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Hydraulic Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Assembly & Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Drive Unit Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Decals & Safety Signs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Augers & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Form No. 3219

Improper operation of this earth auger can cause serious
personal injury or death. Operation of this earth auger should
only be done by a competent adult acting in compliance with
the Operator's Manual. Since drilling operations are beyond
our control, we disclaim all liability for any damages, injuries
or death which may result.

3

Safety

WARNING

Working with unfamiliar equipment can lead to careless injuries. Read and understand this manual and
the manual for your vehicle before assembling, installing, operating, or maintaining this earth auger. If
there is anything in this manual you do not understand, contact your dealer or Danuser LLC. The safe use
of this machine is strictly up to you, the operator. If this unit is used, loaned, or rented by any other
person, it is the owner's responsibility to make certain that the operator prior to operating:

• Reads and understands the Operator's Manuals

• Is instructed in safe and proper use

There is an entanglement risk if you replace the special auger retaining bolt with a bolt longer than
specified by Danuser LLC. This improper replacement occurs most often on machines that are loaned or
rented to someone who has not read the Operator's Manual and is not familiar with an earth auger.

• This earth auger is designed for one-man operation from the vehicle seat. It is the responsibility of
the operator to see that no one is within twenty-five feet (25') of the earth auger when it is started or
in use. Do not operate the earth auger with another person near or in contact with any part of the
drive unit or auger. Serious personal injury or death may result if any attempt is made to assist
drilling operation by hand.

• All operators of this equipment must read and understand this entire manual, paying particular
attention to safety messages and operation instructions, prior to assembling, installing, or operating
the earth auger.

• Please remember it is also important that you read, understand, and follow the safety signs on the
earth auger. Clean or replace all safety signs if they cannot be clearly read and understood. They are
there for your safety as well as the safety of others. Danuser LLC will furnish new safety signs upon
request at no charge.

• All things with moving parts are potentially hazardous. There is no substitute for a cautious,
safe-minded operator who recognizes potential hazards and follows reasonable safety practices.

• Personal protection equipment including hard hat, safety glasses, safety shoes, and gloves are
recommended during assembly, installation, operation, maintenance, removal, or movement of the
earth auger.

• When the use of hand tools is required to perform any part of assembly, installation, maintenance,
removal, or movement of the earth auger, be sure the tools used are designed and recommended by
the tool manufacturer for that specific task.

• Never check pressurized system for leaks with your bare hand. Wear proper hand and eye protection
and use wood or cardboard when searching for suspected leaks. Oil escaping from pinhole leaks
under pressure can penetrate skin and create a serious medical emergency. If any fluid is injected into
the skin, gangrene, blood poisoning, even death may result. Obtain medical attention immediately.

• Always use two people to handle heavy, unwieldy components during assembly, installation,
maintenance, removal, or movement of the earth auger.

• Never place any part of your body where it would be in danger if movement should occur during
assembly, installation, operation, maintenance, removal, or movement of the earth auger.

4

• Check clearances between vehicle and auger, as well as operator and auger, across the full range of
loader arms’ operating heights. Keep earth auger in cradle when not drilling.

• Only properly trained people should operate this equipment. Do not allow anyone who has not read
this entire manual and understood the safety rules, safety signs, and operation instructions to use this
earth auger.

• Never allow children to operate or be around this earth auger.

Safety

(continued)

• Do not allow riders on the equipment at any time. There is no safe place for any riders.

• Never use alcoholic beverages or drugs which can hinder alertness or coordination while operating
this equipment. Consult your doctor about operating this machine while taking prescription
medications.

• Consult local utility companies to make certain there are no buried gas lines, electrical cables, etc.,
in the work area before beginning operation.

• Before beginning operation, clear the work area of objects which might be picked up and thrown by
or entangled in the auger.

• Before you operate the earth auger, check over all pins, bolts, and connections to be sure all are
securely in place. Replace any damaged or worn parts immediately.

• Never replace the auger retaining bolt with anything other than the specified length bolt in this
manual. A longer, or protruding, fastener is more likely to grab clothing or gloves, which can result
in serious injury or death.

• Keep hands, feet, hair, jewelry, and clothing away from all moving and/or rotating parts.

• Never place yourself between the vehicle and the earth auger while the vehicle is running.

• Worn teeth or a slightly rounded point can seriously affect auger penetration. Check for wear before
each use, and replace as necessary.

• Never position the auger point by hand or with any tool when the vehicle is running.

• Never position the auger point by putting your hands on the auger or drive unit.

• Do not shovel dirt away from a rotating auger, as the shovel can be caught and thrown by the auger.

• Never transport with the drive unit out of the cradle or while the auger is rotating.

• Do not walk or work under a raised earth auger unless it is securely blocked or held in position. Do
not depend on the vehicle hydraulic system to hold the earth auger in place.

• A heavy load can cause instability of the vehicle. Use extreme care during travel. Slow down on
turns and watch out for bumps. Use all safety devices, including a seat belt, as recommended in the
vehicle operator’s manual.

• Do not operate the earth auger on steep hillsides. When drilling on uneven or hilly terrain, position
the vehicle with the earth auger uphill. With the earth auger downhill, the vehicle could tip when
attempting to raise the auger from its hole. Consult your vehicle operator’s manual for maximum
incline allowable.

• Always shut off the vehicle engine and remove the key before dismounting the vehicle. Never leave
equipment unattended with the vehicle running.

• Before disconnecting hydraulic lines or fittings be sure to relieve all pressure by cycling all hydraulic
controls after shutdown. Remember hydraulic systems are under pressure whenever the engine is
running and may hold pressure after shutdown.

• Most accidents occur because of neglect or carelessness. Keep all helpers and bystanders twenty-five
feet (25') away from an operating earth auger.

• Always use care when operating an earth auger.

Safety is a primary concern in the design, manufacture, sale, and use of earth augers. As the manufacturer
of your earth auger, we want to confirm to you, our customer, our concern for safety.

5

Drive Unit

Specifications

2545 3060 HP-2545 HP-3060

Minimum Hydraulic Flow 25 GPM 30 GPM 25 GPM 30 GPM

Maximum Hydraulic Flow 45 GPM 60 GPM 45 GPM 60 GPM

Maximum Continuous Operating PSI 3000 PSI 3000 PSI 5000 PSI 5000 PSI

Maximum Auger Diameter 48 inches 48 inches 48 inches 48 inches

Output Spindle 2” Hex 2” Hex 2” Hex 2" Hex

Model 2545H

PSI TORQUE

2000 2727 Ft.-Lbs.
2500 3409 Ft.-Lbs.
3000 4090 Ft.-Lbs.

GPM RPM

Model HP-2545H

GPM RPM

PSI TORQUE

3500 4772 Ft.-Lbs.
4500 6136 Ft.-Lbs.
5000 6817 Ft.-Lbs.

25 56

30 67

35 79

40 90

45 101

25 56

30 67

35 79

40 90

Model 3060H

PSI TORQUE

2000 3503 Ft.-Lbs.
2500 4379 Ft.-Lbs.
3000 5255 Ft.-Lbs.

GPM RPM

Model HP-3060H

GPM RPM

PSI TORQUE

3500 6131 Ft.-Lbs.
4500 7883 Ft.-Lbs.
5000 8759 Ft.-Lbs.

30 52

35 61

40 70

45 79

50 87

55 96

60 105

30 52

35 61

40 70

45 79

45 101

Torque and output speed specifications are based on theoretical values and are provided for comparative purposes only.

6

50 87

55 96

60 105