Dantherm CDP 40, CDP 50, CDP 70 Datasheet
POOL DEHUMIDIFIERS CDP
CDP 40 SWIMMING POOL DEHUMIDIFIER
Function
The CDP 40 is an energy efficient and quiet pool dehumidifier. It works in accordance with the condensation principle. A fan draws the humid air into the
dehumidifier and through an evaporator coil. When passing through the evaporator the air is cooled down to below its dew point temperature, and its content of water vapour is condensed into water, which falls into the drip tray and
then is led from the drip tray to a drain. The cold, dry air is then passed over the
condenser coil where it is re-heated, before leaving the unit at a temperature,
which is approx. 5°C higher than at the inlet.
Applications
• Indoor swimming pools, private or hotels
• Therapy pools
• Spas
• Gymnasias
FEATURES
Dehumidier
• Built into a strong and robust powder coated hot galvanized sheet metal
cabinet
• Evaporator and condenser coils are epoxy-coated for high corrosion
resistance
• Fixed to the wall by means of a wall mounting strip supplied with the unit
• Condensate outlet located at the bottom. Outlet stub can be connected
to a ¾” hose
• Outside connection to mains
Control
• Built in electronic hygrostat and thermostat
• Integrated ON/OFF control of humidity and temperature (electric or water
heating coils as accessories)
• 0-VOLT connection for alarm
• 230 V for control valve, exhaust fan and pump/boiler
• RS 485 gate for BMS (Modbus)
Diodes
BLUE: Power connected, standby mode
GREEN: Compressor ON, deicing
YELLOW: Remote pairing mode
RED: Errors
Defrosting
Active, demand-controlled defrosting is incorporated in the electronic control.
Service
For easy service the refrigerant circuit is supplied with a service valve. The PCB
has a USB gate for history data logging for easy fault finding.
POOL DEHUMIDIFIERS CDP
TECHNICAL DATA
Model CDP 40
Operating range – humidity 40 – 100 %RH
Operating range – temperature 10 – 36°C
Air volume 400 m3/h
Power supply 1x230/50 V/Hz
Max. ampere consumption 3,8 A
Max. power consumption 0,9 kW
Refrigerant R407C
Quantity of refrigerant 0,7 kg
Compressor Rotary
Fan Radial
Sound level (at 1 metre) 46 dB(A)
Weight 56,5 kg
Filter G3 PPI 15
Colour (Cabinet/Front) RAL 7035/9016
Protection class IPX4
Corrosion protection in accordance with EN/ISO 12944-2 C4
CAPACITY CURVES
o
Temp.
C
40
35
30
25
20
15
10
5
0
0 0,5 1,0 1,5 2,0 2,5
Specic energy consumption (SEC):
0,47 kWh/l at 28°C & 60% RH
40% RH 60% RH 80% RH
CDP 40
INSTALLATION
L/H
CDP 40, 50 and 70 are designed for installation in the pool hall.
dantherm.com
POOL DEHUMIDIFIERS CDP
DETAIL A
SCALE 1 : 2
56,4
56,4
430,2
326,1
DIMENSIONS CDP 40
Drain outlet position
1010
CDP 40 - 1010
56,4
430,2
430,2
769,2
769,2
699,9
699,9
326,1
315,6
315,6
Recommended installation of CDP 40
Min. 225
Min. 225
A
727
727
Min. 225
Min. 225
Floor mounting kit
Accessories
Wireless remote control DRC1
Floor mounting kit
Water heating coils
Control valve for water heating coils
Electric heating coils
Exhaust fans
dantherm.com
913
913
298
All dimensions are in mm.
950,5
950,5
Loading...