Installation and Operating Instructions Manual
00809-0900-3104, Rev AA
February 2022
Rosemount™ Ultrasonic Flow Meters
Installation and Operating Instructions specific to the Pressure
Equipment Directive
Safety and approval information
This Rosemount product complies with all applicable European directives when properly installed in accordance with the
instructions in this manual. Refer to the EU declaration of conformity for directives that apply to this product. The EU declaration
of conformity, with all applicable European directives, and the complete ATEX Installation Drawings and Instructions are available
on the internet at www.emerson.com or through your local Emerson support center.
Information affixed to equipment that complies with the Pressure Equipment Directive, can be found on the internet at http://
www.emerson.com.
For hazardous installations in Europe, refer to standard EN 60079-14 if national standards do not apply.
Other information
Full product specifications can be found in the product data sheet. Troubleshooting information can be found in the user manual.
Product data sheets and manuals are available from the Emerson website at http://www.emerson.com.
Return policy
Follow Emerson procedures when returning equipment. These procedures ensure legal compliance with government
transportation agencies and help provide a safe working environment for Emerson employees. Emerson will not accept your
returned equipment if you fail to follow Emerson procedures. Return procedures and forms are available on our web support site
at Emerson.com, or by phoning the Emerson Customer Service department.
Emerson Flow customer service
Email:
• Worldwide: http://flow.support@emerson.com
• Asia-Pacific: http://APflow.support@emerson.com
Telephone:
North and South America
United States 800 522 6277 U.K. 0870 240 1978 Australia 800 158 727
Canada +1 303 527 5200 The Netherlands +31 (0) 704 136 666 New Zealand 099 128 804
Mexico +41 (0) 41 7686 111 France 0800 917 901 India 800 440 1468
Argentina +54 11 4837 7000 Germany 0800 182 5347 Pakistan 888 550 2682
Brazil +55 15 3413 8000 Italy 8008 77334 China +86 21 2892 9000
Europe and Middle East Asia Pacific
Central & Eastern +41 (0) 41 7686 111 Japan +81 3 5769 6803
Russia/CIS +7 495 981 9811 South Korea +82 2 3438 4600
Egypt 0800 000 0015 Singapore +65 6 777 8211
Oman 800 70101 Thailand 001 800 441 6426
Qatar 431 0044 Malaysia 800 814 008
Kuwait 663 299 01
South Africa 800 991 390
Saudi Arabia 800 844 9564
UAE 800 0444 0684
2
Installation and Operating Instructions Manual Contents
00809-0900-3104 February 2022
Contents
Chapter 1 Introduction.............................................................................................................. 5
1.1 Purpose....................................................................................................................................... 5
Chapter 2 Scope.........................................................................................................................7
2.1 Document scope......................................................................................................................... 7
Chapter 3 Installation.................................................................................................................9
3.1 Meter installation.........................................................................................................................9
Rosemount Ultrasonic Flow Meters 3
Contents Installation and Operating Instructions Manual
February 2022 00809-0900-3104
4 Emerson.com/Rosemount
Installation and Operating Instructions Manual Introduction
00809-0900-3104 February 2022
1 Introduction
1.1 Purpose
This document shall identify specific installation and operation instructions necessary to
ensure compliance with the Essential Safety Requirements (ESR) of the European
Economic Area Pressure Equipment Directive (PED) 2014/68/EU and the UK Pressure
Equipment (Safety) Regulations 2016.
Rosemount Ultrasonic Flow Meters 5
Introduction Installation and Operating Instructions Manual
February 2022 00809-0900-3104
6 Emerson.com/Rosemount
Installation and Operating Instructions Manual Scope
00809-0900-3104 February 2022
2 Scope
2.1 Document scope
This document applies to Rosemount Ultrasonic Flow Meters designed by Micro Motion,
Inc. of Boulder, Colarado, USA, and manufactured by Emerson or an authorized agent.
Rosemount Ultrasonic Flow Meters 7
Scope Installation and Operating Instructions Manual
February 2022 00809-0900-3104
8 Emerson.com/Rosemount
Installation and Operating Instructions Manual Installation
00809-0900-3104 February 2022
3 Installation
3.1 Meter installation
Rosemount Ultrasonic Flow Meters are supplied as components to be installed in the end
user's piping system. It is the responsibility of the end user of the equipment to ensure
compliance with the Essential Safety Requirements of the Directive and Regulations
quoted in Purpose of this document. Relevant parts of the directive ESR are listed below.
PED ESR reference ESR requirement Compliance requirement
2.3 Provisions to ensure safe
handling and operation:
• The method of operation
specified for pressure
equipment must be such as
to preclude any reasonably
foreseen risk in the
operation of the
equipment. Particular
attention must be paid,
where appropriate, to the
following.
Rosemount Ultrasonic Flow Meters 9
Installation Installation and Operating Instructions Manual
February 2022 00809-0900-3104
PED ESR reference ESR requirement Compliance requirement
Closures and openings Rosemount Gas Ultrasonic Flow
Meters:
• During removal and
replacement of transducers
the end user shall ensure
that the meter has been
properly isolated and the
internal pressure has been
safely vented.
• If changing the transducers
under line pressure by
means of the Rosemount
supplied extractor tool; the
instructions for use given in
the manual supplied with
each extractor tool must be
strictly complied with.
Rosemount Liquid Ultrasonic
Flow Meters:
• Refer to the Rosemount
Ultrasonic Flow Meter
Installation, Maintenance
and Troubleshooting
manuals for detailed
procedures.
• Rosemount Liquid
Ultrasonic Flow Meters are
supplied with transducers
which are extractable while
the line is pressurized.
10 Emerson.com/Rosemount
Installation and Operating Instructions Manual Installation
00809-0900-3104 February 2022
PED ESR reference ESR requirement Compliance requirement
2.4
• Devices to prevent physical
access while pressure or a
vacuum exists.
• Surface temperature
• Decomposition of unstable
fluids
Means of examination:
• Pressure equipment must
be designed and
constructed so that all
necessary examinations to
ensure safety can be carried
out.
• The end user shall ensure
that the meters are
installed in a properly
designed system with
access limitation in place if
required.
• It is the responsibility of the
end user to assess the
expected surface
temperature in service, and
if necessary, take the
necessary precautions to
avoid personnel coming
into contact with the
equipment.
• It is not envisaged that, for
the designed service, the
equipment shall come into
contact with unstable
fluids. However, the end
user should assess the risk
and take any steps
considered necessary.
• Rosemount Ultrasonic Flow
Meters are designed so that
all critical parts can be
examined without the need
to remove the unit from
service. The end user
should refer to the
operations and
maintenance instructions
supplied with each meter. It
is not considered that the
process medium for which
the equipment is designed
will give rise to severe
corrosion/erosion
problems. It is the end
user's responsibility to
monitor any change in the
process medium that may
cause concern.
2.5
Rosemount Ultrasonic Flow Meters 11
Means of draining and venting:
• To avoid harmful effects
such as water hammer,
vacuum collapse, corrosion
and uncontrolled chemical
reactions.
• It is the responsibility of the
end user to ensure that the
equipment is installed in a
well-designed piping
system to avoid such
hazards.
Installation Installation and Operating Instructions Manual
February 2022 00809-0900-3104
PED ESR reference ESR requirement Compliance requirement
2.6 Corrosion or other chemical
attack
2.7 Wear • It is not expected that the
2.10 Protection against exceeding
the allowable limits of the
pressure equipment
• It is not expected that the
process medium for which
the meters are designed
will give rise to severe
corrosion problems. It is the
end user's responsibility to
monitor any change in the
process medium that may
cause concern.
use of the meter for fluid
measurement will give rise
to any abnormal wear
problems. It is the
responsibility of the end
user to install any necessary
filtration upstream of the
meter to maintain the
condition of the process
medium.
• The Rosemount Ultrasonic
Flow Meters must be
installed in a well-designed
piping system with
adequate protection
against excessive pressure.
2.12 External fire • The Rosemount Ultrasonic
Flow Meters have no special
accessories for fire damage
limitation. It is the
responsibility of the end
user to provide adequate
fire-fighting facilities onsite.
7.3 Pressure limiting devices,
particularly for pressure vessels
• The Rosemount Ultrasonic
Flow Meters are not
pressure vessels and have
no integral pressure
limiting devices. It is the
responsibility of the end
user to ensure that the
meters are installed in a
well-designed system so
that momentary pressure
surges are limited to under
10% of the meters
maximum allowable
pressure.
12 Emerson.com/Rosemount
Installation and Operating Instructions Manual
00809-0900-3104 February 2022
Rosemount Ultrasonic Flow Meters 13
00809-0900-3104
Rev. AA
2022
For more information:
©
2022 Emerson. All rights reserved.
Emerson.com
Emerson Terms and Conditions of Sale are available upon
request. The Emerson logo is a trademark and service mark of
Emerson Electric Co. Rosemount is a mark of one of the
Emerson family of companies. All other marks are the property
of their respective owners.
Loading...