Data sheet
Solenoid coils
Danfoss solenoid valves and coils are usually
ordered separately to allow maximum flexibility,
enabling you to select a valve and coil
combination to best suit your needs.
The Danfoss coil program consists of both the
easy-to-handle Clip-On system and traditional
coils with threaded fastener.
Danfoss offer a wide range of application specific
coils for e.g. steam or hazardous areas. The coils
are available with approvals such as EN60730-1,
EEx/ATEX and UL.
Features y Encapsulated coils with long operating life,
even under extreme conditions
y Standard coils for AC or DC
y Standard coils from 12 V – 400 V, 50, 60 or
50 / 60 Hz
y Coils can be fitted without use of tools
y Coils can only be removed with use of tools
y Standard coils available with:
- Cable plugs
- Industrial plugs
- Terminal box
- 3 core cable
- Junction box
- Conduit hub
© Danfoss | DCS (az) |2017.11
IC.PD.600.3A.02 | 520B8276 | 1
Data sheet | Solenoid coils
Coil identification
Technical data is printed directly on the coil:
1
Country of origin
2
Coil type
3
Spare part no. (code no.)
4
Ambient temperature
(-40 – 40 °C = Ambient temperature range: -40 °C – 40 °C)
5
Supply voltage [V]
6
Frequency [Hz]
7
Power consumption [W]
8
Power consumption [VA]
9
CE marking
10
UL recognized coil
11
Raw coil number
(F4501=Raw coil number 018F4501)
12
Point of contact
1
MADE IN DENMARK
Type BQ240CS
Spare part no.
Tambient
5
208 - 240V 60Hz 9.5W 16VA
230V 50Hz 10W 17VA
6
9
Danfoss A/S, 6430 Nordborg, Denmark
12
018F4511
-40 - 40 °C
F4501
2
3
4
8
7
10
11
© Danfoss | DCS (az) |2017.11
IC.PD.600.3A.02 | 520B8276 | 2
Data sheet | Solenoid coils
BA, High performance coils
y Cable plug enclosure:
- IP00 version with DIN 43650 A spade
connectors
- IP20 version with protective cap
- IP65 version with cable plug
y Nut and snap fastener included
y In accordance with:
- RoHS Directive 2011/65/EU
- Low Voltage Directive 2014/35/EU
- EN60730-1
- EN60730-2-8
Type
BA024A -40 – 40 24 -15%, 10% 50 8.5 17 042N7508
BA048A -40 – 40 48 -15%, 10% 50 9.5 18 042N7510
BA115A -40 – 40 115 -15%, 10% 50 9.0 18 042N7512
BA230A -40 – 40 220 – 230 -15%, 6% 50 12 22 042N7501
BA240A -40 – 40 240 -15%, 10% 50 10 20 042N7502
BA400A -40 – 40 380 – 400 -15%, 6% 50 12 22 042N7504
BA024B
BA115B -40 – 40 115 -15%, 10% 60 12 23 042N7522
BA220B -40 – 40 220 -15%, 10% 60 11 21 042N7523
BA012D -40 – 40 12 ±10% DC 14 – 042N7550
BA024D -40 – 40 24 ±10% DC 14 – 042N7551
Tambient
[°C]
-40 – 40 24
Supply
voltage
[V]
Voltage
variation
-15%, 10%
Frequency
[Hz]
60 9.5
Power consumption
[W] [VA]
19 042N7520
Code no.
Technical data
Dimensions and weight
Design In accordance with VDE 0580
Insulation of coil windings Class H according to IEC 85
Connection Spade connector in accordance with DIN 43650 form A
Enclosure, IEC 529 IP00 with spade connector, IP20 with protective cap, IP65 with cable plug
Duty rating Continuous
Plug type Cable plug (042N0156)
Type
BA 54 71 79 0.16
without cable plug
L
with protective cap
[mm]
L
[mm]
L
with cable plug
[mm]
Weight
[kg]
© Danfoss | DCS (az) |2017.11
IC.PD.600.3A.02 | 520B8276 | 3
Data sheet | Solenoid coils
BD, High performance coils
Technical data
y Cable plug enclosure:
- IP00 version with DIN 43650 A spade
connectors
- IP20 version with protective cap
- IP65 version with cable plug
y Nut and snap fastener included
y In accordance with:
- RoHS Directive 2011/65/EU
- Low Voltage Directive 2014/35/EU
- EN60730-1
- EN60730-2-8
Type
Tambient
[°C]
BD024A -40 – 40 24 -15%, 10% 50 15 29 042N7597
BD230A -40 – 40 230 -10%, 6% 50 14 28 042N7591
Design In accordance with VDE 0580
Insulation of coil windings Class H according to IEC 85
Connection Spade connector in accordance with DIN 43650 form A
Enclosure, IEC 529 IP00 with spade connector, IP20 with protective cap, IP65 with cable plug
Duty rating Continuous
Plug type Cable plug (042N0156)
Supply
voltage
[V]
Voltage
variation
Frequency
[Hz]
Power consumption
[W] [VA]
Code no.
Dimensions and weight
Type
BD 54 71 79 0.16
without cable plug
L
with protective cap
[mm]
L
[mm]
L
with cable plug
[mm]
Weight
[kg]
© Danfoss | DCS (az) |2017.11
IC.PD.600.3A.02 | 520B8276 | 4
Data sheet | Solenoid coils
BB, High performance coils
y Enclosure:
- IP00 version with DIN 43650 A spade
connectors
- IP20 version with protective cap
- IP65 version with mounted cable plug
y In accordance with:
- RoHS Directive 2011/65/EU
- Low Voltage Directive 2014/35/EU
- EN60730-1
- EN60730-2-8
Type
Tambient
[°C]
BB024AS -40 – 80 24 -15%, 10% 50 11 19 018F7358
BB115AS -40 – 80 115 -15%, 10% 50 11 19 018F7361
BB230AS -40 – 80 220 – 230 -15%, 10% 50 11 19 018F7351
BB240AS -40 – 80 240 -15%, 10% 50 11 19 018F7352
BB440CS -40 – 50
BB024BS -40 – 80 24 -15%, 10% 60 14 23 018F7365
BB110CS -40 – 50
BB230CS -40 – 50
Supply
voltage
[V]
380 – 400 -15%, 10% 50 14 24
440 -15%, 10% 60 15 24
110 ±10% 50 15 28
110 ±10% 60 13 22
220 – 230 ±10% 50 16 31
220 – 230 ±10% 60 13 24
Voltage
variation
Frequency
[Hz]
Power consumption
[W] [VA]
Code no.
018F7353
018F7360
018F7363
Technical data
Dimensions and weight
BB012DS -40 – 50 12 ±10% DC 14 – 018F7396
BB024DS -40 – 50 24 ±10% DC 16 – 018F7397
Design In accordance with VDE 0580
Insulation of coil windings Class H according to IEC 85
Connection Spade connector in accordance with DIN 43650 form A
Enclosure, IEC 529 IP00 with spade connector, IP20 with protective cap, IP65 with cable plug
Duty rating Continuous
Plug type Cable plug (042N0156)
Type
BB 62 77 85 0.24
without cable plug
L
with protective cap
[mm]
L
[mm]
L
with cable plug
[mm]
Weight
[kg]
© Danfoss | DCS (az) |2017.11
IC.PD.600.3A.02 | 520B8276 | 5
Data sheet | Solenoid coils
BE
, High performance coils
y Enclosure:
IP67 for moist environments with terminal box
y In accordance with:
- RoHS Directive 2011/65/EU
- Low Voltage Directive 2014/35/EU
- EN60730-1
- EN60730-2-8
Type
BE024AS -40 – 80 24 -15%, 10% 50 12 21 018F6707
BE048AS -40 – 80 48 -15%, 10% 50 11 20 018F6709
BE115AS -40 – 80 115 -15%, 10% 50 11 19 018F6711
BE230AS -40 – 80 220 – 230 -15%, 10% 50 12 22 018F6701
BE240AS -40 – 80 240 -15%, 10% 50 11 19 018F6702
BE440CS -40 – 80
BE024BS
BE115CS -40 – 80
BE220BS -40 – 80 220 -15%, 10% 60 13 23 018F6714
BE110CS
BE230CS -40 – 50
BE012DS -40 – 50 12 ±10% DC 15 – 018F6756
BE024DS -40 – 50 24 ±10% DC 16 – 018F6757
Tambient
[°C]
-40 – 80 24 -15%, 10% 60 14 25 018F6715
-40 – 50 110 ±10% 50 15 28
-40 – 50 110 ±10% 60 13 22
Supply
voltage
[V]
380 – 400 -15%, 10% 50 13 23
440
100 -15%, 10% 50 11 19
115 -15%, 10% 60 13 22
220 – 230 ±10% 50 17 31
220 – 230 ±10% 60 14 24
Voltage
variation
-15%, 10% 60
Frequency
[Hz]
Power consumption
[W] [VA]
14
Code no.
24
018F6703
018F6710
018F6730
018F6732
Technical data
Dimensions and weight
© Danfoss | DCS (az) |2017.11
Design In accordance with VDE 0580
Insulation of coil windings Class H according to IEC 85
Connection Terminal box
Enclosure, IEC 529 IP67
Duty rating Continuous
Plug type Terminal box
Type
BE 94 65 0.30
L
with terminal box
[mm]
L
with 1m cable
[mm]
Weight
[kg]
IC.PD.600.3A.02 | 520B8276 | 6
Data sheet | Solenoid coils
BF
, High performance coils
y Enclosure:
IP67 for moist environments with molded-in
cable
y In accordance with:
- RoHS Directive 2011/65/EU
- Low Voltage Directive 2014/35/EU
- EN60730-1
- EN60730-2-8
Technical data
Type
BF230AS -40 – 80 220 – 230 -15%, 10% 50 12 22 018F6251
BF240AS -40 – 80 240 -15%, 10% 50 11 19 018F6252
BF440CS -40 – 80
BF024AS -40 – 80 24 -15%, 10% 50 12 20 018F6257
BF115CS -40 – 80
BF220BS
BF024BS -40 – 80 24 -15%, 10% 60 14 25 018F6265
BF110CS -40 – 50
BF230CS -40 – 50
Design In accordance with VDE 0580
Insulation of coil windings Class H according to IEC 85
Connection 1 m 3-core flying lead
Enclosure, IEC 529 IP67
Duty rating Continuous
Tambient
[°C]
-40 – 80 220 -15%, 10% 60 14 23 018F6264
Supply
voltage
[V]
380 – 400 -15%, 10% 50 14 24
440 -15%, 10% 60 15 24
100 -15%, 10% 50 11 19
115
110 ±10% 50 15 29
110 ±10% 60 13 23
220 – 230 ±10% 50 16 31
220 – 230 ±10% 60 14 24
Voltage
variation
-15%, 10% 60
Frequency
[Hz]
Power consumption
[W] [VA]
13
Code no.
018F6253
22
018F6260
018F6280
018F6282
Dimensions and weight
© Danfoss | DCS (az) |2017.11
Type
BF 67 0.30
L
with 1m cable
[mm]
Weight
[kg]
IC.PD.600.3A.02 | 520B8276 | 7
112
Data sheet | Solenoid coils
BG, High performance coils
y Enclosure:
IP67 for moist environments with terminal box
y In accordance with:
- RoHS Directive 2011/65/EU
- Low Voltage Directive 2014/35/EU
- EN60730-1
- EN60730-2-8
Type
BG024AS -40 – 80 24 -15%, 10% 50 11 21 018F6807
BG110AS -40 – 80 110 -15%, 10% 50 13 25 018F6811
BG230AS -40 – 80 220 – 230 -15%, 10% 50 15 28 018F6801
BG240AS -40 – 80 240 -15%, 10% 50 13 25 018F6802
BG400AS -40 – 80 380 – 400 -15%, 10% 50 15 29 018F6803
BG024BS -40 – 80 24 -15%, 10% 60 15 29 018F6815
BG110BS
BG220BS -40 – 80 220 -15%, 10% 60 16 29 018F6814
BG012DS -40 – 50 12 ±10% DC 20 – 018F6856
BG024DS -40 – 50 24 ±10% DC 16 – 018F6857
Tambient
[°C]
-40 – 80 110
Supply
voltage
[V]
Voltage
variation
-15%, 10%
Frequency
[Hz]
60 16
Power consumption
[W] [VA]
29 018F6813
Code no.
Technical data
Dimensions and weight
Design In accordance with VDE 0580
Insulation of coil windings Class H according to IEC 85
Connection Terminal box
Enclosure, IEC 529 IP67
Duty rating Continuous
Plug type Terminal box
Type
BG 112 0.50
L
with terminal box
[mm]
Weight
[kg]
© Danfoss | DCS (az) |2017.11
IC.PD.600.3A.02 | 520B8276 | 8
112
Data sheet | Solenoid coils
BN
, High performance coils
Hum-free
y Hum-free
y Enclosure:
IP67 for moist environments with flying lead
y In accordance with:
- RoHS Directive 2011/65/EU
- Low Voltage Directive 2014/35/EU
- EN60730-1
- EN60730-2-8
Technical data
Dimensions and weight
Type
Tambient
[°C]
BN230CS -40 – 50
Design In accordance with VDE 0580
Insulation of coil windings Class H according to IEC 85
Connection 1 m 3-core flying lead
Enclosure, IEC 529 IP67
Duty rating Continuous
Type
BN 112 0.60
Supply
voltage
[V]
220 – 230 ±10% 50 22 24
220 – 230 ±10% 60 22 24
L
L
Voltage
variation
with 1m cable
L
[mm]
Frequency
[Hz]
Power consumption
[W] [VA]
Weight
[kg]
Code no.
018F7301
© Danfoss | DCS (az) |2017.11
IC.PD.600.3A.02 | 520B8276 | 9
67.5
Danfoss
18F115.10
Data sheet | Solenoid coils
BN
, High performance coils
Center boss
y Enclosure:
- Center boss for mounting IP65 cable plug in
accordance with DIN43650 form A
(042N0156)
- IP67 for moist environments with terminal
box
y Used with EV215B, EV225B, and EV245B up to
160 °C low pressure steam and max. ambient
temperature 40 °C (see additional information
in the respective solenoid valve data sheets)
y In accordance with:
- RoHS Directive 2011/65/EU
- Low Voltage Directive 2014/35/EU
- EN60730-1
- EN60730-2-8
y Mounted with the solenoid valves EV210B,
EV220B, EV215B and EV225B, the assembly is
UL recognized
Type
Tambient
[°C]
BN024DS -40 – 50 24 ±10% DC 20 – 018F6968
Supply
voltage
[V]
Voltage
variation
Frequency
[Hz]
Power consumption
[W] [ VA]
Approval Code no.
Technical data
Dimensions and weight
Design In accordance with VDE 0580
Insulation of coil windings Class H according to IEC 85
Connection Cable plug in accordance with DIN43650 form A or terminal box
Enclosure, IEC 529 IP65, IP67
Duty rating Continuous
Type
BN 64 0.47
64
L
30
L
[mm]
ø34
58
Weight
[kg]
© Danfoss | DCS (az) |2017.11
IC.PD.600.3A.02 | 520B8276 | 10
Data sheet | Solenoid coils
BO, High performance coils
y ATEX Zone 1
y Enclosure:
IP67 seal kit for moist environment included
y Approved in accordance with
- ATEX 2014/34/EU
- Ex mb IIC T4 Gb
- ITS 09 ATEX 16835X
y Media temperature: Up to 90 °C
Type
Tambient
[°C]
BO024C -40 – 60 24 ±10% 50 / 60 10 21 018Z6595
BO110C -40 – 60 110 ±10% 50 / 60 10 21 018Z6593
BO230C -40 – 60 230 ±10% 50 / 60 10 21 018Z6592
BO240C -40 – 60 240 ±10% 50 / 60 10 21 018Z6591
BO024D -40 – 60 24 ±10% DC 10 – 018Z6596
Supply
voltage
[V]
Voltage
variation
Frequency
[Hz]
Power consumption
[W] [VA]
Code no.
Technical data
Accessory
Dimensions and weight
Insulation of coil windings Class H according to IEC 85
Connection 5 m 3 x 0.75 mm² flexible cord
Enclosure, IEC 529 IP67 including seal kit
Media temperature -40 °C 90 °C
Duty rating Continuous
Humidity 0 100%
Pollution degree 3 (EN60730-1)
Impulse withstand voltage 2.5 kV (EN60730-1)
Description Application Code no.
Seal kit (included as standard) Wet environment (pollution degree 3) 018Z0090
© Danfoss | DCS (az) |2017.11
Weight : 0.60 kg
IC.PD.600.3A.02 | 520B8276 | 11
Data sheet | Solenoid coils
BJ, High performance coils
Junction box
Technical data
y Enclosure:
IP30 / NEMA 2
y For UL listed valves (UL 429 and CSA)
y Ambient temperature:
Up to 50 °C / 122 °F
y Media temperature:
Up to 185 °C / 364 °F steam
Valve type Coil type
EV220B 6-50
EV210B
EV215B
EV225B
EV250B
Design In accordance with UL 429
Power consumption, cut in 49 VA
Insulation of coil windings Class H according to IEC 85
Connection Junction box
Enclosure, IEC 529 Junction box NEMA 2 ~ IP12 – 30
Ambient temperature -40 – 50 °C / -40 – 122 °F
BJ024CS ±10% 24 50 / 60 14 7 18 018F4100
BJ120CS ±10%
BJ240CS ±10%
Voltage
tolerance
Supply
voltage
[V]
110
120
208 – 240
230
Frequency
[Hz]
50 / 60
60
60
50
Power
consumption
[W]
16
15
14
17
Wire length
[in.] [cm]
7 18 018F4110
7 18 018F4120
Code no.
Dimensions and weight
Danfoss
18F07.11
52mm (2 in.)
100mm (4 in.)
50mm (2 in.)
Weight 0.860 lbs / 0.39 kg
© Danfoss | DCS (az) |2017.11
IC.PD.600.3A.02 | 520B8276 | 12
Danfoss
18F06.10
48mm (2 in.)
74mm (3 in.)
41mm (1
5
/8 in.)
Data sheet | Solenoid coils
BX, High performance coils
Conduit hub
Valve type Coil type
BX024CS ±10% 24 50 / 60 14 18 46 018F4102
BX024CS ±10% 24 50 / 60 14 71 180 018F4103
EV220B 6-50
EV210B
EV215B
EV225B
EV250B
BX024CS ±10% 24 50 / 60 14 98 250 018F4104
BX120CS ±10%
BX120CS ±10% 36 91 018F4113
BX120CS ±10% 71 180 018F4114
BX120CS ±10% 98 250 018F4115
BX240CS ±10%
BX240CS ±10% 98 250 018F4123
Voltage
tolerance
Supply
voltage
[V]
110
120
208 – 240
230
y Enclosure:
IP54 / NEMA 4
y For UL listed valves (UL 429 and CSA)
y Ambient temperature:
Up to 50 °C / 122 °F
y Media temperature:
Up to 185 °C / 364 °F steam
Frequency
[Hz]
50 / 60
60
60
50
Power
consumption
[W]
16
15
14
17
Wire length
[in.] [cm]
18 46 018F4112
18 46 018F4122
Code no.
Technical data
Dimensions and weight
Design In accordance with UL 429
Power consumption, cut in 49 VA
Insulation of coil windings Class H according to IEC 85
Connection Conduit hub
Enclosure, IEC 529 Conduit hub NEMA 4 ~ IP54
Ambient temperature -40 – 50 °C / -40 – 122 °F
Weight 0.717 lbs / 0.33 kg
© Danfoss | DCS (az) |2017.11
IC.PD.600.3A.02 | 520B8276 | 13
Data sheet | Solenoid coils
BY, High performance coils
Type
Tambient
[°C]
BY024CS -40 – 50
BY240CS -40 – 50
BY120CS -40 – 50
y Enclosure:
Up to IP65 / NEMA 4
y For UL recognised valves
y In accordance with:
- RoHS Directive 2011/65/EU
- Low Voltage Directive 2014/35/EU
- EN60730-1
- EN60730-2-8
Supply
voltage
[V]
24 ±10% 50 14 26
24 ±10% 60 12 21
230 ±10% 50 16 32
208 – 240 ±10% 60 14 28
110 ±10% 50 14 27
110 – 120 ±10% 60 14 27
Voltage
variation
Frequency
[Hz]
Power consumption
[W] [ VA]
Approval Code no.
018F7655
018F7658
018F7663
Technical data
Dimensions and weight
Design In accordance with VDE 0580
Insulation of coil windings Class H according to IEC 85
Connection Spade connector in accordance with DIN 43650 form A
Enclosure, IEC 529 Up to IP65 / NEMA 4
Plug type Cable plug (042N0156)
Type
BY 62 77 85 0.24
without cable plug
L
with protective cap
[mm]
L
[mm]
L
with cable plug
[mm]
Weight
[kg]
© Danfoss | DCS (az) |2017.11
IC.PD.600.3A.02 | 520B8276 | 14
Data sheet | Solenoid coils
BQ, High performance coils
y Enclosure:
Up to IP65 / NEMA 4
y Max. media temperature:
185 °C steam
y For UL recognised valves
y In accordance with:
- RoHS Directive 2011/65/EU
- Low Voltage Directive 2014/35/EU
- EN60730-1
- EN60730-2-8
Type
Tambient
[°C]
BQ024CS -40 – 40
BQ120BS -40 – 40 110 / 120 -15%, 6% 60 13.5 19 018F4519
BQ240CS -40 – 40
Supply
voltage
[V]
24 -15%, 10% 50 10 17
24 -15%, 10% 60 9.0 16
230 -15%, 6% 50 10 17
208 / 240 -6%, 6% 60 9.5 16
Voltage
variation
Frequency
[Hz]
Power consumption
[W] [ VA]
Approval Code no.
018F4517
018F4511
Technical data
Dimensions and weight
Design In accordance with VDE 0580
Insulation of coil windings Class H according to IEC 85
Connection Spade connector in accordance with DIN 43650 form A
Enclosure, IEC 529 Up to IP65 / NEMA 4
Plug type Cable plug (042N0156)
Type
BQ 62 77 85 0.24
without cable plug
L
with protective cap
[mm]
L
[mm]
L
with cable plug
[mm]
Weight
[kg]
© Danfoss | DCS (az) |2017.11
IC.PD.600.3A.02 | 520B8276 | 15
Data sheet | Solenoid coils
AM coil
y Cable plug enclosure:
- IP00 version with DIN 43650 A spade
connectors
- IP20 version with protective cap
- IP65 version with cable plug
y In accordance with:
- RoHS Directive 2011/65/EU
- Low Voltage Directive 2014/35/EU
- EN60730-1
- EN60730-2-8
Type
Tambient
[°C]
AM024C -40 – 50
AM110C -40 – 50
AM230C -40 – 50
AM240C -40 – 50
AM012D -40 – 50 12 ±10% DC 8.5 – 042N0848
AM024D -40 – 50 24 ±10% DC 9.0 – 042N0843
Supply
voltage
[V]
24 ±10% 60 5.5 11
24 ±10% 50 7.5 14
110 ±10% 60 5.5 11
110 ±10% 50 7.5 14
230 ±10% 60 6.5 13
230 ±10% 50 9.5 18
240
240
Voltage
variation
±10% 60
±10% 50 7.5 15
Frequency
[Hz]
Power consumption
[W] [VA]
5.5
Code no.
042N0842
042N0845
042N0840
11
042N0841
Technical data
Dimensions and weight
Design In accordance with VDE 0580
Power consumption, cut in 22.5 VA AC coils only
Insulation of coil windings Class H according to IEC 85
Connection Spade connector in accordance with DIN 43650 form A
Enclosure, IEC 529 IP00 with spade connector, IP65 with cable plug
Duty rating Continuous
Plug type Cable plug (042N0156)
Type
AM 48 72 64 0.10
without cable plug
L
[mm]
L
with cable plug
[mm]
with protective cap
L
[mm]
Weight
[kg]
© Danfoss | DCS (az) |2017.11
IC.PD.600.3A.02 | 520B8276 | 16
Data sheet | Solenoid coils
AP, Compact UL recognised
coils
Type
AP240C
AP120B
AP024B
Tambient
[°C / °F]
-40 – 50 /
-40 – 122
-40 – 50 /
-40 – 122
-40 – 50 /
-40 – 122
y Cable plug enclosure:
- IP00 version with DIN 43650 A spade
connectors
- IP20 version with protective cap
- IP65 version with cable plug
y For UL recognised valves
y Ambient temperature:
Up to 50 °C / 122 °F
y In accordance with:
- RoHS Directive 2011/65/EU
- Low Voltage Directive 2014/35/EU
- EN60730-1
- EN60730-2-8
Supply
voltage
[V]
208 – 240 ±10% 60 5.5 11
230 ±10% 50 7.5 15
110 – 120 ±10% 60 5.0 11 042N4292
24 ±10% 60 5.0 11 042N4293
Voltage
variation
Frequency
[Hz]
Power consumption
[W] [ VA]
Approval Code no.
042N4291
Technical data
Dimensions and weight
Design In accordance with VDE 0580
Insulation of coil windings Class H according to IEC 85
Connection Spade connector in accordance with DIN 43650 form A
Enclosure, IEC 529 IP00 with spade connector, IP65 / NEMA 2 with cable plug
Duty rating Continuous
Plug type Cable plug (042N0156)
Type
AP 1.89 2.83 2.52 0.10 / 0.22
without cable plug
L
[in]
L
with cable plug
[in]
with protective cap
L
[in]
Weight
[kg / lbs]
0.63 1.30
1.22
© Danfoss | DCS (az) |2017.11
IC.PD.600.3A.02 | 520B8276 | 17
Data sheet | Solenoid coils
Cable plug
Technical data
y Enclosure:
Up to IP65
y For use with Danfoss coils type AL, AM, AS, AZ,
BA, BB, BD, BN (Center boss), BQ, and BY
y AC / DC all voltages up to 250 V
y Approved in accordance with:
-
- CSA
- VDE
Cable plug size Description Suitable for coil types Code no.
DIN 18
Type GDM 2011 J (Grey)
Design DIN 43650-A
Cable gland PG 11
Poles 2 + PE
Max. voltage 250 V AC / DC
Approvals
Enclosure IP65 (IEC 60529)
Max. operating current 16 A
Contact resistance < 10m Ω
Cable diameter Ø4.5 – 11 mm
Wire cross section Max. 1.5 mm
Ambient temperature -30 – 90 °C / -22 – 194 °F
Materials
Cable plug according to
DIN 43650-A PG 11
Contacts: CuSn (Tin plated)
Terminal block: PA 6 GF
Profiled gasket: NBR
Housing: PA 6 GF
AL, AM, AS, AZ, BA, BB, BD,
BN (Center boss), BQ, BY
CSA, VDE
,
2
042N0156
Dimensions and weight
© Danfoss | DCS (az) |2017.11
ø
Weight 0.031 kg / 0.068 lbs
IC.PD.600.3A.02 | 520B8276 | 18
Data sheet | Solenoid coils
Cable plug
Technical data
y Enclosure:
Up to IP65
y For use with Danfoss coils type AL, AM, AS, AZ,
BA, BB, BD, and BY
y AC / DC all voltages up to 250 V
y Approved in accordance with:
CSA
y In accordance with:
- RoHS 2011/65/EU
- LVD 2014/35/EU
Cable plug size Description Suitable for coil types Code no.
DIN 18 Cable plug with form A
Design
Cable gland PG 11
Poles 2 + PE
Max. voltage 250 V AC / DC
Approvals CSA
Enclosure IP65
Max. operating current 16 A
Contact resistance < 4m Ω
Cable diameter Ø6 – 8 / 8 – 10 mm
Wire cross section Max. 1.5 mm
Ambient temperature -25 – 80 °C / -13 – 176 °F
Materials
EN 175301-803 Form A
Contacts: CuZn, Cu / Sn - plated
Terminal block: PA 6 GF
Profiled gasket: NBR
Housing: PA 6 GF
AL, AM, AS, AZ, BA, BB,
BD, BY
2
042N0178
Dimensions and weight
© Danfoss | DCS (az) |2017.11
Weight 0.031 kg / 0.068 lbs
IC.PD.600.3A.02 | 520B8276 | 19
ø
ø
Data sheet | Solenoid coils
Industrial plug
Technical data
y Enclosure:
Up to IP65
y For use with Danfoss coils type AB and AC
y AC / DC all voltages up to 250 V
y Approved in accordance with:
-
- CSA
Industrial plug size Description Suitable for coil types Code no.
DIN 11
Type GM 209 J (Black)
Design
Cable gland PG 9
Poles 2 + PE
Max. voltage 250 V AC / DC
Approvals
Enclosure IP65 (IEC 60529)
Max. operating current 16 A
Contact resistance < 10m Ω
Cable diameter Ø4.5 – 7 mm
Wire cross section Max. 1.5 mm
Ambient temperature -30 – 90 °C / -22 – 194 °F
Materials
Cable plug for 6.3 x 0.8 mm
spade connectors
DIN 43650-B
CSA
Contacts: CuSn (Tin plated)
Terminal block: PA 6 GF
Flat gasket: NBR
Housing: PA 6 GF
AB, AC 042N0139
2
Dimensions and weight
© Danfoss | DCS (az) |2017.11
Weight 0.023 kg / 0.050 lbs
IC.PD.600.3A.02 | 520B8276 | 20
Data sheet | Solenoid coils
Cable plug (LED + Varistor)
Technical data
y Enclosure:
Up to IP65
y For use with Danfoss coils type AM, AK, AL, AS,
AZ, BA, BD, BB, and BY
y 24 V AC / DC and 230 V AC version
y DIN 18
y Approved in accordance with:
CSA
y In accordance with:
- RoHS 2011/65/EU
- LVD 2014/35/EU
Cable
plug size
DIN 18 24 24 ±10% AM, AL, AS, AZ, BA, BB, BD, BY Red Yes 042N0263
DIN 18 230 – ±10% AM, AL, AS, AZ, BA, BB, BD, BY Red Yes 042N0265
)
Protects against voltage peaks.
Design EN 175301-803 A
Power consumption Max. 5 mA
Approval CSA
Enclosure IP65 (IEC 60529)
Max. operating current 1.5 A clamping contact
Contact resistance ≤ 4m Ω
Protection against wrong polarity Yes
Cable diameter 6 – 8 mm and 8 – 10 mm
Wire cross section Max. 1.5 mm
Ambient temperature -25 – 60 °C / -13 – 140 °F
Materials
Voltage
[V AC] [V DC]
Voltage
variation
LED
Suitable for coil types
2
Contacts: CuZn, Cu / Sn-plated
Terminal block: PA6 + 30% FG, black
Flat gasket: NBR LABS-free
Housing: PA6
Wire holder: PA6.6 + 50% FG P7,5 black
colour
Built-in VDR )
resistor
Code no.
Dimensions and weight
© Danfoss | DCS (az) |2017.11
Weight 0.027 kg / 0.059 lbs
IC.PD.600.3A.02 | 520B8276 | 21
Data sheet | Solenoid coils
Industrial plug
(LED + Varistor)
Technical data
y Enclosure:
Up to IP65
y For use with Danfoss coils type AB and AC
y 24 V AC
y Approved in accordance with:
CSA
y In accordance with:
- RoHS 2011/65/EU
- LVD 2014/35/EU
Industrial
plug size
DIN 11 24 24 AB, AC Red Yes 042N0267
1
)
Protects against voltage peaks.
Design Industrial form
Supply voltage variation ±10%
Power consumption Max. 5 mA
Approval CSA
Enclosure IP65 (IEC 60529)
Max. operating current 1.5 A clamping contact
Contact resistance ≤ 4m Ω
Protection against wrong polarity Yes
Cable diameter 5 – 6 mm and 6 – 9 mm
Wire cross section Max. 1 mm
Ambient temperature -25 – 60 °C / -13 – 140 °F
Materials
Voltage
[V AC] [V DC]
Suitable for coil
types
Contacts: CuZn, Cu/Sn-plated
Terminal block: PA6 + 30% FG, black
Flat gasket: NBR LABS-fre
Housing: PA 6
Wire holder: PA6.6 + 50% FG P7,5 black
LED colour
2
Built-in VDR )
resistor
Code no.
Dimensions and weight
© Danfoss | DCS (az) |2017.11
Weight 0.027 kg / 0.059 lbs
IC.PD.600.3A.02 | 520B8276 | 22
Universal electronic
multi-timer Type ET 20 M
y Outside adjustments
y Light weight and small size
y External adjustable timing from 1 minute to
45 minutes with 1 to 15 seconds drain open
y One solid state timer fits all coil voltages from
24 – 240 V AC
y Light diodes for indication
y All in one unit
y Manual override (test button).
Technical data
Dimensions and weight
Type
BA024A 24 – 240 AL, AM, AS, AZ, BA, BD, BB 042N0185
Type ET 20 M
Voltage 24 – 240 V AC / 50 – 60 Hz
Power rating Max. 20 W
Enclosure IP00, IP65 with cable plug
Electrical connection DIN connector (DIN 43650-A)
Ambient operating temperature range -10 – 50 °C
Function Start with pulse
Interval timer 0 – 45 min.
“On” timer 0 – 15 sec.
Voltage
[V]
Suitable for coil types Code no.
© Danfoss | DCS (az) |2017.11
IC.PD.600.3A.02 | 520B8276 | 23
Loading...