Danfoss Electronics Filter Driers Catalog Page

Filter Driers

Danfoss filter driers function as simple drop-in replacements for most driers sold in the aftermarket or installed on equipment by manufacturers. All Danfoss filter driers are constructed with a solid core design, maximizing moisture removal while minimizing pressure drop. DC cores and DCL filter driers include both moisture and acid adsorption properties, while DM cores and DML filter driers only include moisture adsorption properties. Danfoss recommends DC cores and DCL filter driers for standard liquid line aftermarket applications and DM cores and DML filter driers when acid reduction is not necessary. For acid reduction after a burnout, Danfoss recommends suction line DAS filter driers or DA cores. For CO2 applications, Danfoss recommends DM cores or DMT filter driers.

DCL/DCB Filter Driers

Danfoss Type

DCL 1.52/2.8mms

DCL 032s ¼ solder 667 8.50 8.00 9.10 8.70 8.60 8.00 7.80 7.20 1.90 1.42 2.12 2.11 023Z5013

DCL 032 ¼ ﬂare 667 8.50 8.00 9.10 8.70 8.60 8.00 7.80 7.20 1.90 1.42 2.12 2.11 023Z5000

DCL 052s ¼ solder 667 13.60 12.80 14.60 13.80 13.80 12.70 12.40 11.40 2.18 1.60 2.40 2.37 023Z5018

DCL 052 ¼ ﬂare 667 13.60 12.80 14.60 13.80 13.80 12.70 12.40 11.40 2.18 1.60 2.40 2.37 023Z5002

DCL 053s 3⁄8 solder 667 13.60 12.80 14.60 13.80 13.80 12.70 12.40 11.40 3.66 2.79 4.10 4.15 023Z5019

DCL 053 3⁄8 ﬂare 667 13.60 12.80 14.60 13.80 13.80 12.70 12.40 11.40 3.66 2.79 4.10 4.15 023Z5003

DCL 082s ¼ solder 667 21.70 20.50 23.30 22.10 22.00 20.30 19.80 18.20 2.18 1.55 2.37 2.28 023Z5022

DCL 082 ¼ ﬂare 667 21.70 20.50 23.30 22.10 22.00 20.30 19.80 18.20 2.18 1.55 2.37 2.28 023Z5004

DCL 083s 3⁄8 solder 667 21.70 20.50 23.30 22.10 22.00 20.30 19.80 18.20 4.03 3.12 4.56 4.65 023Z5023

DCL 084s ½ solder 667 21.70 20.50 23.30 22.10 22.00 20.30 19.80 18.20 8.14 6.07 9.03 8.99 023Z5026

DCL 084 ½ ﬂare 667 21.70 20.50 23.30 22.10 22.00 20.30 19.80 18.20 8.14 6.07 9.03 8.99 023Z5006

DCL 162 ¼ ﬂare 667 47.70 45.10 51.30 48.60 48.30 44.70 43.50 40.10 2.18 1.54 2.36 2.28 023Z5007

DCL 163s 3⁄8 solder 667 47.70 45.10 51.30 48.60 48.30 44.70 43.50 40.10 4.64 3.18 4.95 4.67 023Z5029

DCL 163 3⁄8 ﬂare 667 47.70 45.10 51.30 48.60 48.30 44.70 43.50 40.10 4.64 3.18 4.95 4.67 023Z5008

DCL 164s ½ solder 667 47.70 45.10 51.30 48.60 48.30 44.70 43.50 40.10 9.15 6.69 10.07 9.90 023Z5032

DCL 165s 5⁄8 solder 667 47.70 45.10 51.30 48.60 48.30 44.70 43.50 40.10 12.69 10.41 14.74 15.59 023Z5033

DCL 165 5⁄8 ﬂare 667 47.70 45.10 51.30 48.60 48.30 44.70 43.50 40.10 12.69 10.41 14.74 15.59 023Z5010

DCL 303s 3⁄8 solder 667 100.50 95.00 108.00 102.40 101.80 94.10 91.60 84.40 4.46 3.00 4.72 4.40 023Z0030

DCL 303 3⁄8 ﬂare 667 100.50 95.00 108.00 102.40 101.80 94.10 91.60 84.40 4.46 3.00 4.72 4.40 023Z0012

DCL 304s ½ solder 667 100.50 95.00 108.00 102.40 101.80 94.10 91.60 84.40 9.24 7.11 10.41 10.58 023Z0031

DCL 304 ½ ﬂare 667 100.50 95.00 108.00 102.40 101.80 94.10 91.60 84.40 9.24 7.11 10.41 10.58 023Z0013

DCL 305s 5⁄8 solder 667 100.50 95.00 108.00 102.40 101.80 94.10 91.60 84.40 13.00 10.51 14.99 15.72 023Z0032

DCL 305 5⁄8 ﬂare 667 100.50 95.00 108.00 102.40 101.80 94.10 91.60 84.40 13.00 10.51 14.99 15.72 023Z0014

DCL 307s 7⁄8 solder 667 100.50 95.00 108.00 102.40 101.80 94.10 91.60 84.40 18.27 15.34 21.44 23.05 023Z0034

DCL 415s 5⁄8 solder 667 139.50 131.90 150.00 142.20 141.30 130.70 127.30 117.30 15.78 11.9 17.61 17.66 023Z0105

DCL 417s 7⁄8 solder 500 139.50 131.90 150.00 142.20 141.30 130.70 127.30 117.30 18.98 16.01 22.32 24.08 023Z0106

DCL 607s 7⁄8 solder 667 200.90 189.90 216.00 204.80 203.50 188.20 183.30 168.90 19.93 19.94 25.16 30.71 023Z0036

DCB 083s 3⁄8 solder 667 15.60 14.70 16.70 15.80 15.60 14.50 14.10 13.00 2.10 1.50 2.30 2.30 023Z1433

DCB 163s 3⁄8 solder 667 29.30 27.70 31.50 29.90 29.70 27.50 26.80 24.60 5.10 3.70 5.70 5.70 023Z1437

DCB 164s ½ solder 667 29.30 27.70 31.50 29.90 29.70 27.50 26.80 24.60 8.00 5.70 9.10 9.10 023Z1436

DCB 165s 5⁄8 solder 667 29.30 27.70 31.50 29.90 29.70 27.50 26.80 24.60 10.60 8.30 11.40 11.40 023Z1435

Wire mesh in filter drier outlet.

Connection

(in.)

¼ solder 667 5.10 4.60 5.30 5.10 5.10 4.60 4.60 4.20 0.80 0.50 0.90 0.80 023Z8255

Max. working pressure

(psig)

R-134a R-404A R-22 R-410A

75 °F 125 °F 75 °F 125 °F 75 °F 125 °F 75 °F 125 °F

Drying capacity (lbs. of refrigerant) Liquid capacity (tons)

R-134a R-404A R-22 R-410A

Danfoss

Code No.

Food Retail Service Parts Catalog

DAS Filter Driers

Danfoss Type Connection in.

DAS 164SVV ½ solder

DAS 165SVV 5⁄8 solder 2.7 3.7 4.3 0.3 023Z1010

DAS 166SVV ¾ solder 3.4 4.9 5.7 0.3 023Z1011 DAS 167SVV 7⁄8 solder 3.9 5.4 6.3 0.3 023Z1012 DAS 306SVV ¾ solder 4 5.4 6.3 0.64 023Z1014

DAS 307SVV 7⁄8 solder 4.6 6.3 7.4 0.64 023Z1015 DAS 309SVV 11⁄8 solder 5.7 7.7 8.9 0.64 023Z1016 DAS 419SVV 11⁄8 solder 6.3 8.6 10 0.86 023Z1018

For rated capacities for R-290, R-448A, R-449A, R-452A, and other HFO, HC, HFC, and HCFC refrigerants not listed, see Coolselector®2 or contact Danfoss.

Max. working

pressure (psig)

500

R-134a R-404A

Rated capacity (tons)

1.7 2.4 6.3 0.3 023Z1009

R-22

R-410A

Acid capacity (oz.) Danfoss Code No.

DMT Filter Driers for CO

Danfoss

Type

DMT 083s 3⁄8 solder 2030 7.2 7.2 143 5.7 5.8 114 3 023Z8416

Connection

in.

Max. working

pressure (psig)

Drying capacity

20 °F 75 °F

Water (g) Ref. (Kg) Water (drops) Water (g) Ref. (Kg) Water (drops) Tons

Liquid

capacity

Danfoss

Code No.

DCR Cores and Gaskets

Danfoss Type Material Danfoss Code No.

48-DM 100% molecular sieve 023U1392

48-F strainer 023U1921

48-DC 80% molecular sieve/20% activated alumina 023U4381

48-DA solid core 023U5381

DCR gasket kit various 023U0058

DCR Drier Housing

Danfoss Type Connection (in.) Connection Type Weight Max. Pressure (psig) Temperature Range (°F) Danfoss Code No.

DCR 0489 1 butt weld/solder, ODF 10 lbs. 6 oz.

DCR 0969 1 butt weld/solder, ODF 13 lbs. 12 oz. 023U7459

DCR 09617 2 1⁄8 butt weld/solder, ODF 14 lbs. 9 oz. 023U7464

NRV—Check Valves

NRV check valves can be used in liquid, suction, and hot gas lines in refrigeration and air conditioning applications, ensuring that refrigerant flows in the correct direction. A built-in

667 −40 to +160

dampening piston makes the valve suitable for lines where pulsation can occur, such as in the discharge line from the compressor. The NRV 10s H is specifically designed with a high MWP for CO2 applications.

023U7453

Danfoss

Type

NRV 6s

NRV 10s 3⁄8 1.01 1.39 020-1011

NRV 10s

NRV 12s ½ 0.72 2.37 020-1012

NRV 16s 5⁄8 0.72 4.16 020-1018

NRV 19s ¾ 0.72 6.36 020-1019

NRV 19s

Oversize connections

Δp = the minimum pressure at which the valve is completely open

The Cv valve is the flow of water in (gal/min) at a pressure drop across valve of 14.5 psig. ρ = 2205 lbs./G

Design/

conn. type

straight-

way/

solder

ODF

Conn.

Pressure drop across

size (in.)

¼ 1.01 0.65

½ 1.01 1.39 020-1058

7⁄8 0.72 6.36 020-1054

valve (psi)

Cv value

(gal/min)

MWP

(psi)

667

Danfoss

Code No.

020-1010

Danfoss

Type

NRV 10s H

Design/

conn. type

straight-way/

solder ODF

Conn.

Cv value

size

(gal/min)

(in.)

3⁄8 1.04 1305 020-4000

MWP

(psi)

Danfoss

Code No.

Food Retail Service Parts Catalog