Danfoss Electronics DML, DCL Data Sheet

Data sheet

ELIMINATOR® Hermetic filter drier Types DML and DCL

All ELIMINATOR® driers have a solid core with binding material held to an absolute minimum.

There are two types of ELIMINATOR® cores. Type DML driers have a core composition of 100% Molecular Sieve, while type DCL contain 80% Molecular Sieve with 20% activated alumina.

ELIMINATOR® type DML driers are designed for applications requiring the highest moisture capacity.

ELIMINATOR® type DCL driers are designed for applications requiring high moisture capacity and acid adsorption capacity.

Available with solder (cu-plated steel connectors) and ﬂare connections.

For other connections please contact your Danfoss Sales Representative.

Features The Core type DML

• 100% Molecular Sieve core

• High drying capacity minimizing the risk of acid formation (hydrolysis)

• Recommended for use with R134a, R404A, R32,R410A, R407C, R23, R600, R600a,R1234yf, R1234ze, R407f, R290, R452A,R444B, R449A, R448A and R450A refrigerants

• Will not deplete oil additives

The Core type DCL

• 80% Molecular Sieve with 20% activated alumina

• Perfect core blend for systems that operate at high condensing temperatures and require high drying capacity

• Recommended for use with Applicable to R22, R134a, R404A, R32,R410A, R407C, R23, R600, R600a,R1234yf, R1234ze, R407f, R290, R452A,R444B, R449A, R448A and R450A refrigerants

The Shell

• PED approved for PS 46 bar

• Available with solder (Cu-plated steel connectors) and ﬂare connections

• Corrosion resistant powder-painted ﬁnish. Special coating for marine applications available upon request

• Allows installation with any orientation provided the arrow is in the ﬂow direction

• Available in sizes 3 – 75 cubic inches

The Filter

• 25 μm (0.001 in.) ﬁlter provides high retention with minimal pressure drop

• Thermally stable up to 120 °C

AI192386435941en-001201 | 1© Danfoss | DCS (nb) | 2019.10

Data sheet | ELIMINATOR® Hermetic ﬁlter drier, types DML and DCL

Approvals

Introduction

UL US, ﬁle no. SA 6398 PED 2014/68/EU -a4p3 Compliant with ATEX hazard zone 2

Note: Only solder versions (cu-plated / pure copper) and connection sizes below 25 mm are approved for

ﬂammable refrigerants now.

ELIMINATOR® Hermetic ﬁlter driers protect refrigeration and air-conditioning systems from moisture, acids, and solid particles.

EVR

TCAE

With these contaminants eliminated, systems are safer from harmful chemical reactions and from abrasive impurities.

Danfoss

R64-2107.10

AKS

EKC

Technical data

Flare connection

Solder connection

(cu-plated steel connectors)

SGN GBC DML / DCL GBC

Surface and volume

Filter

DML/DCL 03 82 29 0.08 0.051

DML/DCL 05 95 35 0.12 0.085

DML/DCL 08 131 56 0.17 0.114

DML/DCL 16 220 134 0.36 0.226

DML/DCL 30 378 256 0.72 0.464

DML/DCL 41 510 350 0.97 0.620

DML/DCL 60 756 513 1.34 0.827

DML/DCL 75 1019 702 1.81 1.108

Filter

DCL 03 0.5

DCL 05 0.8

DCL 08 1.3

DCL 16 2.9

DCL 30 6.1

DCL 41 8.3

DCL 60 12.2

DCL 75 16.6

) Adsorption capacity of oleic acid at 0.05

TAN (Total Acid Number).

Temperature range:

-40 – 70 °C

Maximum working pressure: PS 46 bar

Solid core surface Solid core volume

[cm2] [cm3] [l] [l]

Acid capacity 1)

[g]

Filter drier volume

(shell volume)

Filter drier volume

(net volume)

2 | AI192386435941en-001201 © Danfoss | DCS (nb) | 2019.10

Data sheet | ELIMINATOR® Hermetic ﬁlter drier, types DML and DCL

Technical data and capacities DML - Hermetic ﬁlter drier

Drying and liquid capacity (SI units)

Dryin g capacity [kg] o f refrigerant 1)

Typ e

DML 1.52 s 2.9 2.7 3 .1 3.0 3.2 2.9 2.9 2.7 2.9 2.7 2.6 2.4 4.34 3.47 2.7 2.5 2.81 1.90 1.8 5 2.98 2.78 2.73 4.20 4.08 46

DML 032 / 032s 4.58 4.32 4.9 4 4.67 5.03 4.63 4.64 4.27 4.58 4. 21 4.15 3.80 6.85 5.47 4. 29 3.88 6 .13 4 .15 4.05 6. 51 6.08 5.96 7. 00 8. 91 46

DML 032. 5s 4.6 4.3 4.9 4.7 5.0 4.6 4.6 4.3 4.6 4.2 4. 2 3.8 6.85 5.47 4.3 3.9 9.63 6. 53 6.36 10 .23 9.56 9.36 11. 50 14. 01 46

DML 033 / 033s 4.58 4.32 4.9 4 4.67 5.03 4.63 4.64 4.27 4.58 4. 21 4.15 3.80 6.85 5.47 4.29 3.88 11 .2 5 6.68 7.43 10.4 6 11.1 7 9.58 13. 50 16. 37 46

DML 034s 4.6 4.3 4 .9 4.7 5.0 4.6 4.6 4.3 4.6 4.2 4. 2 3.8 6.85 5.47 4.3 3.9 16. 44 11. 56 11 .21 17. 91 16. 84 1 7.10 19. 80 25.05 46

DML 052 / 052s 7. 49 7. 05 8 .07 7.6 3 8.23 7. 56 7. 59 6 .98 7.4 9 6.89 6.79 6.22 11. 19 8.95 7.0 1 6.35 6 .51 4 .41 4.30 6.91 6.46 6. 33 7. 80 9. 47 46

DML 052 .5s 7. 5 7.1 8.1 7. 6 8.2 7.6 7. 6 7. 0 7. 5 6.9 6.8 6.2 11. 19 8.95 7. 0 6.3 12.13 8 .21 8. 01 12. 87 12. 03 11 .78 14 .50 17. 64 46

DML 053 / 053s 7. 49 7. 05 8 .07 7.6 3 8.23 7. 56 7. 59 6 .98 7.4 9 6.89 6.79 6.22 11. 19 8.95 7.0 1 6.35 16. 52 11. 19 10.91 17. 54 16. 39 16.05 19 .80 24 .02 46

DML 054s 7.5 7.1 8.1 7. 6 8.2 7. 6 7. 6 7. 0 7. 5 6.9 6. 8 6.2 11 .19 8 .95 7. 0 6.3 21. 89 14.8 3 14 .45 23. 24 21.7 2 21.27 26.20 31. 84 46

DML 055s 7. 49 7. 05 8.07 7. 63 8.23 7. 56 7. 59 6.98 7. 49 6.89 6.79 6.22 11. 19 8.95 7.0 1 6. 35 26.8 4 18 .18 17.7 2 28.50 26.63 26.08 32 .10 39.04 46

DML 082 / 08 2s 12.1 11 .4 13 .1 12 .3 13 .3 12 .2 12 .3 11. 3 12.1 11.1 11. 0 10.1 18.12 14. 48 11. 3 10. 3 6 .46 4.38 4.27 6.86 6. 41 6 .28 7.7 0 9.40 46

DML 082 .5s 12 .13 11 .42 13 .07 12 .35 13 .32 12 .24 12 .29 11. 30 12 .13 11. 15 10 .99 10.07 18 .12 14.4 8 11. 35 10 .28 12. 42 8.41 8.20 13.19 12 .32 12 .07 14 .90 18.0 6 46

DML 083 / 083 s 12.1 11 .4 13 .1 12 .3 13 .3 12 .2 12 .3 11. 3 12.1 11.1 11. 0 10.1 18.12 14. 48 11. 3 10. 3 16. 28 11. 03 10. 75 17.2 8 1 6.15 15 .82 19. 50 23.68 46

DML 084 / 0 84s 12.13 11. 42 13. 07 12 .35 13 .32 12 .24 12 .29 11 .3 0 12 .13 11.1 5 10 .99 10.07 18 .12 14.4 8 11. 35 10. 28 21.42 14.51 14 .14 2 2.74 21.2 5 20. 82 25.60 31.15 46

DML 085 / 08 5s 12.1 11 .4 13 .1 12 .3 13 .3 12 .2 12 .3 11. 3 12.1 11.1 11. 0 10.1 18.12 14. 48 11. 3 10. 3 25.06 16.9 8 16 .55 26.61 24. 87 24.36 30. 00 36.45 46

DML 162 / 162s 2 7.0 9 25. 51 29. 20 2 7.58 29.75 27.35 27. 44 25. 24 27.1 0 24.9 0 24. 56 2 2.49 40 .47 32. 35 25.34 22.95 6.75 4.57 4.46 7.17 6.70 6.56 8.10 9.82 46

DML 163 / 163s 2 7.1 25.5 29.2 2 7.6 29.8 27. 3 27. 4 25.2 27. 1 24 .9 24.6 22.5 40.47 32.3 5 25. 3 23.0 19.42 13 .15 12. 82 20 .61 19. 26 18. 87 23. 20 28. 24 46

DML 164 / 164s 2 7.0 9 25. 51 29. 20 2 7.58 29.75 27.35 27. 44 25. 24 27.1 0 24.9 0 24. 56 2 2.49 40 .47 32. 35 25.34 22.95 27. 04 18. 32 17. 86 28 .71 26.83 26.28 32.40 39.33 46

DML 165 / 165s 2 7.1 25.5 29.2 2 7.6 29.8 27. 3 27. 4 25.2 27. 1 24 .9 24.6 22.5 40.47 32.3 5 25. 3 23.0 37. 81 2 5.61 24. 97 40.14 37. 52 3 6.75 45. 20 54.99 46

DML 166 / 166s 2 7.0 9 25. 51 29. 20 2 7.58 29.75 27.35 27. 44 25. 24 27.1 0 24.9 0 24. 56 2 2.49 40 .47 32. 35 25.34 22.95 44 .16 29.91 29 .16 4 6.89 43.82 42.92 52.8 0 64.22 46

DML 167s 2 7.1 25.5 29.2 2 7.6 29.8 27. 3 27. 4 25.2 27. 1 24 .9 24.6 22.5 40.47 32. 35 25. 3 23.0 49.71 33.67 32.83 52.78 49. 32 48 .31 59.50 72.29 46

DML 303 / 303s 55.9 5 52.6 9 60.31 56.97 61. 45 56.49 56.68 5 2.13 55.97 51. 44 50.72 46.46 81.59 65.23 52.34 4 7.41 20. 48 13. 87 13. 52 21 .74 20.32 19. 90 24. 50 29.79 46

DML 304 / 30 4s 56.0 52.7 60.3 5 7.0 61. 4 56.5 56.7 52.1 56.0 51.4 50.7 46.5 81. 59 65. 23 52. 3 47. 4 3 0.67 20.77 20.25 32. 56 30 .42 29.8 0 36.70 44.60 46

DML 305 / 305s 55.9 5 52.6 9 60.31 56.97 61. 45 56.49 56.68 5 2.13 55.97 51. 44 50.72 46.46 81.59 65.23 52.34 4 7.41 48 .61 32.93 3 2.10 51. 61 4 8.23 47. 24 58. 20 70.70 46

DML 306 / 30 6s 56.0 52.7 60.3 5 7.0 61. 4 56.5 56.7 52.1 56.0 51.4 50.7 46.5 81. 59 65. 23 52. 3 47. 4 60 .17 40.75 39.73 63.88 59.69 58. 47 72.00 87. 50 46

DML 307s 55.95 52.69 60.31 56 .97 61 .45 56.49 56.68 5 2.13 55. 97 51. 44 50.72 46.46 81. 59 65. 23 52.34 4 7.41 69.4 6 4 7.05 45.8 6 73 .74 68.91 6 7.5 0 83.10 101.01 46

DML 309s 56.0 52.7 60.3 5 7.0 61.4 56.5 56.7 52 .1 56.0 51.4 50.7 46.5

DM L 413 75.56 7 1.15 81.4 4 76.93 82.98 76.2 8 76. 54 70.4 0 75.57 69.4 6 68.49 62.73 110 .18 88.08 70 .68 64 .02 19 .47 13 .19 12. 86 20.67 19 .32 18 .92 23.30 28. 32 35

DML 414 / 414s 75.6 7 1.2 81.4 76. 9 83.0 76 .3 76.5 70. 4 75. 6 69. 5 68.5 62.7 11 0.18 88.08 70.7 64.0 31. 84 21.56 21.02 33 .80 31.59 30.9 4 38 .10 46. 30 46

DML 415 / 415S 75.56 71 .15 81.4 4 76 .93 82.9 8 76. 28 76. 54 70. 40 75.57 69.4 6 68.49 62.73 110 .18 88.08 70.68 64.02 51.5 8 34.9 4 34.06 5 4.76 51. 17 50 .12 61. 70 75.01 46

DM L 417s 75.6 71.2 81. 4 76.9 83.0 76. 3 76.5 70.4 75.6 69.5 68.5 62.7 110 .18 88.08 70.7 64.0 84.69 57. 37 55.9 2 89 .91 84 .03 82.30 101.30 123 .17 46

DML 419s 75.56 71.15 81. 44 76.93 82.98 76. 28 76 .54 70 .40 75. 57 69.4 6 68.49 62.73

DML 607s 111. 9 10 5.4 120 .6 113 .9 12 2.9 11 3. 0 113 .4 104 .3 111. 9 102. 9 101.4 92.9 163 .19 130. 46 104.7 94.8 79. 42 53.79 52.4 4 84 .31 78.79 77. 17 95.00 115 .49 35

DML 609s 111. 91 105 .38 120. 62 113. 94 12 2.9 0 112. 97 113 .37 10 4.27 111 .93 102. 87 101.44 92.91

DML 757s 151.1 142. 3 162.9 153. 9 166. 0 15 2.6 15 3.1 140 .8 151.1 13 8.9 13 7.0 125 .5

DML 759s 151 .11 142.30 162. 88 153 .86 165. 95 152 .55 15 3.0 8 140. 80 15 1.15 13 8.9 1 136 .98 12 5.4 6

) Drying capa city is based on following moisture content test standa rds before and after d rying:

R134 a R404A R507 R22 R407C R 410A R290 R32

24 52 24 52 24 52 24 52 24 52 24 52 24 52 24 52

– – – –

R134 a R404A R507 R22 R407C R 410A R290 R32[°C]

79.18 53 .63 52. 28 84.06 78 .55 76 .94

91.01 61 .64 60.09 96.62 90.29 88.44

95.42 64.63 63.01 101. 30 9 4.67 92 .73

81.75 55 .37 53 .98 86.79 81 .11 79.4 4

101.79 68.94 6 7.21 108 .06 100 .98 98 .91

– R32: 990 ppm W - 50 ppm W – R134a: 1050 – 50 ppm W – R404A, R507: 1020 – 50 ppm W – R407C: 1020 – 50 ppm W – R410A: 1050 – 50 ppm W – R22: 1050 – 60 ppm W In accordance with ARI 710-2004

) Given in accordance with ARI 710-2004 for –te= -15 °C –tc= 30 °C –Δ p = 0.07 bar

For technical data on other refri gerants, please contact your Danfoss Sales Represe ntative

Liquid capacity [kW] 2)

working pressure

– –

Max.

PS [ba r]

667

507

AI192386435941en-001201 | 3© Danfoss | DCS (nb) | 2019.10

Data sheet | ELIMINATOR® Hermetic ﬁlter drier, types DML and DCL

Technical data and capacities (continued)

Typ e

DC L1.5 2XL /

DCL 032 / 032s

DCL 032. 5s

DCL 033 / 033s

DCL 052 / 052s

DCL 052. 5s

DCL 053 / 053s

DCL 082 / 082 s

DCL 082. 5s

DCL 083 / 083s

DCL 084 / 0 84s

DCL 162 / 162s

DCL 163 / 163s

DCL 164 / 164s

DCL 165 / 165s

DCL 166 / 166s

DCL 16 7s

DCL 303 / 303s

DCL 304 / 30 4s

DCL 305 / 305s

DCL 306 / 30 6s

DCL 3 07s

DCL 309s

DC L 413

DCL 414 / 414s

DCL 415 / 415s

DC L 417s

DCL 419s

DCL 6 07s

DCL 609s

DCL 7 57s

DCL 759 s

R134 a R4 04A R507 R22 R407C R410A R290 R32

24 52 24 52 24 52 24 52 24 52 24 52 24 52 24 52

2.3 2 .1 2.4 2.3 2.5 2.3 2.3 2.1 2.3 2 .1 2 .1 1.9 3.4 2.7 2.1 1.9 2 .81 1. 90 1. 85 2.98 2.78 2.73 4.20 4.08 46

3.65 3.44 3.94 3.72 4 .01 3.69 3.70 3.40 3.66 3.36 3. 31 3.03 5.46 4.36 3. 42 3.10 6 .13 4.15 4.05 6 .51 6.08 5.9 6 7.0 0 8.91 46

3.65 3.44 3.94 3.72 4 .01 3.69 3.70 3.40 3.66 3.36 3. 31 3.03 5.46 4.36 3. 42 3.10 9.63 6.53 6.36 10. 23 9. 56 9.36 11 .50 14.01 46

3.65 3.44 3.94 3.72 4 .01 3.69 3.70 3.40 3.66 3.36 3. 31 3.03 5.46 4.36 3. 42 3.10 11. 25 6.68 7. 43 10 .46 11 .17 9.58 13. 50 16.37 46

5.9 5.5 6.3 6.0 6.4 5.9 5.9 5. 5 5.9 5.4 5.3 4.9 8.7 7. 0 5.5 5.0 6 .51 4.41 4.30 6. 91 6 .46 6. 33 7. 80 9.47 46

5.86 5. 52 6 .31 5.96 6.43 5.91 5.93 5.4 6 5.86 5.38 5. 31 4.86 8 .75 6.99 5.4 8 4.9 6 12 .13 8. 21 8. 01 12 .87 12. 03 11. 78 14. 50 17.6 4 46

5.86 5. 52 6 .31 5.96 6.43 5.91 5.93 5.4 6 5.86 5.38 5. 31 4.86 8 .75 6.99 5.4 8 4.9 6 16. 52 11.1 9 10.91 1 7.54 16.39 16. 05 19. 80 24.02 46

9.45 8 .90 1 0.18 9.62 10. 37 9. 54 9.57 8.80 9.45 8.68 8.56 7.8 4 1 4.11 11. 28 8.84 8.00 6.46 4.38 4 .27 6. 86 6 .41 6. 28 7.7 0 9.40 46

9.45 8 .90 1 0.18 9.62 10. 37 9. 54 9.57 8.80 9.45 8.68 8.56 7.8 4 1 4.11 11. 28 8.84 8.00 12. 42 8. 41 8.20 13 .19 12.3 2 12 .07 14.9 0 18. 06 46

9.45 8 .90 1 0.18 9.62 10. 37 9. 54 9.57 8.80 9.45 8.68 8.56 7.8 4 1 4.11 11. 28 8.84 8.00 16.2 8 11 .03 10.75 17. 28 16.15 15 .82 19. 50 23.68 46

9.45 8 .90 1 0.18 9.62 10. 37 9. 54 9.57 8.80 9.45 8.68 8.56 7.8 4 1 4.11 11. 28 8.84 8.00 21.42 14. 51 14.14 22 .74 21. 25 20. 82 25.6 0 31.15 46

21.32 20.08 22.9 8 21.71 23.42 21.52 21. 60 19. 87 21.33 19. 60 19.33 17. 70 31.8 5 25.46 19.9 5 18 .07 6.75 4 .57 4.4 6 7.17 6.70 6. 56 8 .10 9. 82 46

21.32 20.08 22.9 8 21.71 23.42 21.52 21. 60 19. 87 21.33 19. 60 19.33 17. 70 31.8 5 25.46 19.9 5 18 .07 19.42 13.15 12 .82 20 .61 19.26 18 .87 23. 20 28 .24 46

21.32 20.08 22.9 8 21.71 23.42 21.52 21. 60 19. 87 21.33 19. 60 19.33 17. 70 31.8 5 25.46 19.9 5 18 .07 2 7.0 4 18.32 17. 86 28 .71 26.83 26 .28 32 .40 39.33 46

21.32 20.08 22.9 8 21.71 23.42 21.52 21. 60 19. 87 21.33 19. 60 19.33 17. 70 31.8 5 25.46 19.9 5 18 .07 37. 81 25. 61 24 .97 4 0.14 37. 52 36.75 45.20 54.99 46

21.32 20.08 22.9 8 21.71 23.42 21.52 21. 60 19. 87 21.33 19. 60 19.33 17. 70 31.8 5 25.46 19.9 5 18 .07 4 4.16 29.91 29.1 6 46.89 43. 82 42.92 52.80 64. 22 46

21.32 20.08 22.9 8 21.71 23.42 21.52 21. 60 19. 87 21.33 19. 60 19.33 17. 70 31.8 5 25.46 19.9 5 18 .07 4 9.71 33.67 32.83 52.78 49 .32 48 .31 59. 50 72.29 46

43.83 41.2 7 47.2 4 4 4.62 4 8.13 44.24 44.40 4 0.84 43. 84 4 0.29 39.7 3 36 .39 63.91 51.0 9 41. 00 3 7.13 20.48 13 .87 13 .52 21. 74 20 .32 19. 90 24.50 29.79 46

43.83 41.2 7 47.2 4 4 4.62 4 8.13 44.24 44.40 4 0.84 43. 84 4 0.29 39.7 3 36 .39 63.91 51.0 9 41. 00 3 7.13 30. 67 20.77 20.2 5 32. 56 30.42 29.80 3 6.70 4 4.60 46

43.83 41.2 7 47.2 4 4 4.62 4 8.13 44.24 44.40 4 0.84 43. 84 4 0.29 39.7 3 36 .39 63.91 51.0 9 41. 00 3 7.13 4 8.61 32.93 32.10 5 1.61 48.23 47. 24 58.20 70.70 46

43.83 41.2 7 47.2 4 4 4.62 4 8.13 44.24 44.40 4 0.84 43. 84 4 0.29 39.7 3 36 .39 63.91 51.0 9 41. 00 3 7.13 6 0.17 40.75 39.73 63. 88 59. 69 58 .47 72 .00 87. 50 46

43.83 41.2 7 47.2 4 4 4.62 4 8.13 44.24 44.40 4 0.84 43. 84 4 0.29 39.7 3 36 .39 63.91 51.0 9 41. 00 3 7.13 69.46 47. 05 45.8 6 73. 74 6 8.91 6 7.5 0 83.10 101.01 46

43.83 41.2 7 47.2 4 4 4.62 4 8.13 44.24 44.40 4 0.84 43. 84 4 0.29 39.7 3 36 .39

59.71 56 .23 64.36 60.80 65. 58 60. 28 60. 49 55. 64 59.73 54.89 5 4.13 49.58 87. 08 69 .61 55.86 50.6 0 19 .47 13 .19 12.8 6 20. 67 19. 32 18 .92 23. 30 28. 32 46

59.71 56 .23 64.36 60.80 65. 58 60. 28 60. 49 55. 64 59.73 54.89 5 4.13 49.58 87. 08 69 .61 55.86 50.6 0 31. 84 21.56 21.0 2 33.80 31.59 30.9 4 3 8.10 4 6.30 46

59.71 56 .23 64.36 60.80 65. 58 60. 28 60. 49 55. 64 59.73 54.89 5 4.13 49.58 87. 08 69 .61 55.86 50.6 0 51. 58 3 4.94 34.0 6 54 .76 5 1.17 50 .12 61.70 7 5.01 46

59.71 56 .23 64.36 60.80 65. 58 60. 28 60. 49 55. 64 59.73 54.89 5 4.13 49.58 87. 08 69 .61 55.86 50.6 0 84.69 57. 37 55.92 89.91 84.03 82.30 101. 30 123 .17 35

59.71 56 .23 64.36 60.80 65. 58 60. 28 60. 49 55. 64 59.73 54.89 5 4.13 49.58

87. 65 82.54 94.4 8 89.2 5 96. 26 88.49 88.80 81.67 87. 67 80.58 79. 46 72.78 12 7.82 102 .19 82.00 74 .27 79.42 53.79 52.4 4 8 4.31 78.79 77. 17 95.00 115. 49 46

87. 65 82.54 94.4 8 89.2 5 96. 26 88.49 88.80 81.67 87. 67 80.58 79. 46 72.78

119. 43 112. 46 128. 72 12 1.60 131.15 12 0.5 6 120 .99 111 .2 8 119 .4 6 10 9.79 10 8.26 99 .16

DCL - Hermetic ﬁlter drier Drying and liquid capacity (SI units)

Dryin g capacity [kg] o f refrigerant 1) Liquid capacity [kW] 2

1) Drying capacity is based on following moisture content test standards before and after drying:

– R32: 990 ppm W - 50 ppm W – R134a: 1050 – 50 ppm W – R404A, R507: 1020 – 50 ppm W – R407C: 1020 – 50 ppm W – R410A: 1050 – 50 ppm W – R22: 1050 – 60 ppm W

In accordance with ARI 710-2004

) Given in accordance with ARI 710-2004 for

– te= -15 °C – tc= 30 °C – Δp = 0.07 bar

For technical data on other refrigerants, please contact your Danfoss Sales Representative

– – – –

R134 a R404A R507 R22 R407C R410A R290 R 32[°C]

79.18 53.63 52.28 84.0 6 78. 55 76 .94

91.01 61. 64 60.0 9 96.62 9 0.29 88.44

95.42 64.63 63. 01 101.30 94 .67 92 .73

81.75 55.37 53.98 86.79 81. 11 79.44

101.79 68 .94 67. 21 10 8.06 10 0.98 98 .91

– –

Max.

working

pressure

[bar]

Conversions

(1 kg of refrigerant × (Initial PPM of water - Final PPM of water))

Drops of water =

See ARI standard 710-86 for recommended initial and ﬁnal PPM values for diﬀerent refrigerants.

4 | AI192386435941en-001201 © Danfoss | DCS (nb) | 2019.10

Data sheet | ELIMINATOR® Hermetic ﬁlter drier, types DML and DCL

Ordering

Type DCL Flare

Type

DCL 032

DCL 033

DCL 052

DCL 053

DCL 082

DCL 083

DCL 084

DCL 162

DCL 163

DCL 164

DCL 165

DCL 166

DCL 303

DCL 304

DCL 305

DCL 306

DCL 414

DCL 415

) Wire mesh in ﬁlter drier outlet

)India make is available with code 023ZXXXX91

Connection size Multi pack

[in.] [mm] Code no. Qty. Code no. Qty.

⁄4 6 023Z5000 1) 2) 32 – –

⁄4 6 023Z5075 2) 32 – –

⁄8 10 023Z5001 1) 2) 32 – –

⁄8 10 023Z5089 2) 32 – –

⁄4 6 023Z5002 2) 24 023Z8002 2) 16

⁄8 10 023Z5003 2) 24 023Z8003 2) 16

⁄4 6 023Z5004 2) 24 023Z8004 2) 16

⁄8 10 023Z5005 2) 24 023Z8005 2) 16

⁄2 12 023Z5006 2) 24 – –

⁄4 6 023Z5007 2) 12 023Z8007 2) 12

⁄8 10 023Z5008 2) 12 023Z8008 2) 12

⁄2 12 023Z5009 2) 12 023Z8009 2) 12

⁄8 16 023Z5010 2) 12 023Z8010 2) 12

⁄4 19 023Z5011 2) 12 – –

⁄8 10 023Z0012 8 – –

⁄2 12 023Z0013 8 023Z3013 8

⁄8 16 023Z0014 8 023Z3014 8

⁄4 19 023Z0156 8 – –

⁄2 12 023Z0102 8 – –

⁄8 16 023Z0103 8 – –

Industrial pack

for OEM only

AI192386435941en-001201 | 5© Danfoss | DCS (nb) | 2019.10

Data sheet | ELIMINATOR® Hermetic ﬁlter drier, types DML and DCL

Ordering (continued)

Type DML Flare

Type

DML 032

DML 033

DML 052

DML 053

DML 082

DML 083

DML 084

DML 085

DML 162

DML 163

DML 164

DML 165

DML 166

DML 303

DML 304

DML 305

DML 306

DML 385

DML 413

DML 414

DML 415

DML 416

) Wire mesh in ﬁlter drier outlet

Connection size Multi pack

Industrial pack

for OEM only

[in.] [mm] Code no. Qty. Code no. Qty.

⁄4 6 023Z5035 1) 2) 32 023Z8035 1) 2) 28

⁄8 10 023Z5036 1) 2) 32 023Z8036 1) 28

⁄8 10 023Z5090 2) 32 – –

⁄4 6 023Z5037 2) 24 023Z8037 2) 16

⁄8 10 023Z5038 2) 24 023Z8038 2) 16

⁄4 6 023Z5039 2) 24 023Z8039 2) 16

⁄8 10 023Z5040 2) 24 023Z8040 2) 16

⁄2 12 023Z5041 2) 24 023Z8041 2) 16

⁄8 16 023Z5073 2) 24 – –

⁄4 6 023Z5042 2) 12 023Z8042 2) 12

⁄8 10 023Z5043 2) 12 023Z8043 2) 12

⁄2 12 023Z5044 2) 12 023Z8044 2) 12

⁄8 16 023Z5045 2) 12 023Z8045 2) 12

⁄4 19 023Z5046 2) 12 – –

⁄8 10 023Z0049 8 023Z3049 8

⁄2 12 023Z0050 8 023Z3050 8

⁄8 16 023Z0051 8 023Z3051 8

⁄4 19 023Z0193 8 023Z3193 8

⁄8 16 023Z0189 8 – –

⁄8 10 023Z0108 8 – –

⁄2 12 023Z0109 8 – –

⁄8 16 023Z0110 8 023Z3110 6

⁄4 19 023Z0195 8 023Z0210 6

) India make is available with code 023ZXXXX91

6 | AI192386435941en-001201 © Danfoss | DCS (nb) | 2019.10

Data sheet | ELIMINATOR® Hermetic ﬁlter drier, types DML and DCL

Ordering (continued)

Type DCL Solder (cu-plated steel connectors)

Type

Conn.

size

Multi pack

[in.] Code no. Q ty. Code no. Q ty. [mm] Code no. Q ty. Code no. Q ty.

DCL 032s

DCL 032.5s

DCL 033s

DCL 052s

DCL 053s

DCL 082s

DCL 083s

DCL 084s

DCL 162s

DCL 163s

DCL 164s

DCL 165s

DCL 166s

DCL 167s

DCL 303s

DCL 304s

DCL 305s

DCL 306s

DCL 307s

⁄4 023Z4501 2) 32 023Z4801 2) 28 6 023Z4500 2) 32 023Z4800 2) 28

⁄16 023Z4502 2) 32 023Z4803 2) 28 8 – – – –

⁄8 023Z4504 2) 32 – – 10 023Z4503 2) 32 – –

⁄4 023Z4506 2) 24 023Z4805 2) 16 6 023Z4505 2) 24 023Z4804 2) 16

⁄16 023Z4507 2) 24 – – 10 – – – –

⁄8 023Z4509 2) 24 023Z4807 2) 16 10 023Z4508 2) 24 – –

⁄4 023Z4511 2) 24 – – 6 023Z4510 2) 24 – –

⁄16 023Z4512 2) 28 – – 6 – – – –

⁄8 023Z4514 2) 24 023Z4811 2) 16 10 023Z4513 2) 24 023Z4809 2) 16

⁄2 023Z4516 2) 24 023Z4813 2) 16 12 023Z4515 2) 24 – –

⁄4 023Z4518 2) 12 – – 6 023Z4517 2) 12 – –

⁄8 023Z4521 2) 12 – – 10 023Z4519 2) 12 023Z4814 12

⁄2 023Z4523 2) 12 023Z4815 2) 12 12 023Z4522 2) 12 – –

⁄8 023Z4524 2) 12 023Z4816 2) 12 12 – – – –

⁄4 023Z4525 2) 12 – – – – – – –

/8023Z4526 2) 12 – – – – – – –

⁄8 023Z4528 8 023Z4817 8 10 023Z4527 8 – –

⁄2 023Z4530 8 – – 12 023Z4529 8 – –

⁄8 023Z4531 8 023Z4819 8 16 – 8 – –

⁄4 023Z4533 8 – – 18 023Z4532 8 – –

⁄8 023Z4534 8 023Z4820 8 22 – 8 – –

DCL 309s 11⁄8 023Z4536 8 – – 28 023Z4535 8 – –

DCL 414s

DCL 415s

DCL 417s

⁄2 023Z4538 8 – – 12 – 8 – –

⁄8 023Z4539 8 – – 16 – 8 – –

⁄8 023Z4540 8 – – 22 – 8 – –

DCL 419s 11⁄8 023Z4542 8 – – 28 023Z4541 8 – –

DCL 604s

DCL 607s

⁄2 023Z4544 12 – – 22 – – – –

⁄8 023Z4545 6 – – 22 – – – –

DCL 609s 11⁄8 – 12 – – 28 023Z4546 6 – –

DCL 757s

⁄8 023Z4548 12 – – 22 – – – –

DCL 759s 11⁄8 023Z4550 12 – – 28 023Z4549 12 – –

) India make is available with code 023ZXXXX91

Industrial pack

for OEM only

Conn.

size

Multi pack

Industrial pack

for OEM only

AI192386435941en-001201 | 7© Danfoss | DCS (nb) | 2019.10

Data sheet | ELIMINATOR® Hermetic ﬁlter drier, types DML and DCL

Ordering (continued)

Type DML Solder (cu-plated steel connectors)

Type

Conn.

size

Multi pack

[in.] Code no. Q ty. Code no. Q ty. [mm] Code no. Q ty. Code no. Qty.

DML 032s

DML 032.5s

DML 033s

DML 034s

DML 052s

DML 052.5s

DML 053s

DML 054s

DML 055s

DML 082s

DML 082.5s

DML 083s

DML 084s

DML 085s

DML 162s

DML 163s

DML 164s

DML 165s

DML 166s

DML 167s

DML 303s

DML 304s

DML 305s

DML 306s

DML 307s

⁄4 023Z4552 2) 32 023Z4822 2) 28 6 023Z4551 2) 32 023Z4821 2) 28

⁄16 023Z4553 2) 32 023Z4823 2) 28 8 – – – –

⁄8 023Z4555 2) 32 023Z4825 2) 28 10 023Z4554 2) 32 023Z4824 2) 28

/2023Z4556 2) 32 – – 12 023Z4557 32 – –

⁄4 023Z4559 2) 24 023Z4849 2) 16 6 023Z4558 2) 24 023Z4826 2) 16

⁄16 023Z4560 2) 24 – – 6 – – – –

⁄8 023Z4562 2) 24 023Z4828 2) 16 10 023Z4561 28 023Z4827 2) 16

⁄2 023Z4564 2) 24 – – 12 023Z4563 2) 12 023Z4845 2) 16

⁄8 023Z4565 2) 24 023Z4838 2) 16 16 – – – –

⁄4 023Z4567 2) 24 023Z4847 2) 16 6 023Z4566 2) 24 023Z4866 2) 16

⁄16 023Z4568 24 – – 8 – – – –

⁄8 023Z4570 2) 24 023Z4835 2) 16 10 023Z4569 24 023Z4839 2) 16

⁄2 023Z4572 2) 24 023Z4829 2) 16 12 023Z4571 2) 24 023Z4840 2) 16

⁄8 023Z4573 2) 24 – – 16 – – – –

⁄4 023Z4575 2) 12 – – 6 023Z4574 2) 12 – –

⁄8 023Z4578 2) 12 023Z4836 2) 12 10 023Z4577 2) 12 023Z4842 2) 12

⁄2 023Z4580 2) 12 023Z4830 2) 12 12 023Z4579 2) 12 023Z4843 2) 12

⁄8 023Z4581 2) 12 023Z4831 2) 12 16 – – – –

⁄4 023Z4582 2) 12 023Z4832 2) 12 19 – – – –

/8023Z4583 2) 12 – – 22 – – – –

⁄8 023Z4585 8 – – 10 023Z4584 8 – –

⁄2 023Z4587 8 023Z4837 8 12 023Z4586 8 023Z4844 8

⁄8 0023Z4588 8 023Z4833 8 16 – – – –

⁄4 023Z4589 8 023Z4848 8 19 – – – –

⁄8 023Z4590 8 023Z4834 8 22 – – – –

DML 309s 11⁄8 023Z4592 8 – – 28 023Z4591 8 – –

DML 414s

DML 415s

DML 417s

⁄2 023Z4594 8 – – 12 023Z4593 8 – –

⁄8 023Z4595 8 – – 16 – – – –

⁄8 023Z4596 8 023Z4896 6 22 – – – –

DML 419s 11⁄8 023Z4598 8 023Z4898 6 28 023Z4597 8 – –

DML 604s

DML 605s

DML 607s

⁄2 023Z4600 12 – – 12 023Z4599 12 – –

⁄2 – – – – 18 023Z4601 6 – –

⁄8 023Z4602 6 023Z4902 – 22 – – – –

DML 609s 11⁄8 023Z4604 12 – – 28 023Z4603 12 – –

DML 757s

⁄8 023Z4605 12 023Z4905 4 22 – – – –

DML 759s 11⁄8 023Z4607 12 023Z4907 4 28 023Z4606 12 – –

) India make is available with code 023ZXXXX91

Industrial pack

for OEM only

Conn.

size

Multi pack

Industrial pack

for OEM only

8 | AI192386435941en-001201 © Danfoss | DCS (nb) | 2019.10

Data sheet | ELIMINATOR® Hermetic ﬁlter drier, types DML and DCL

Identiﬁcation Type codes

Type Codes Description

Filter drier D Drier

Solid core

Application L Liquid line

Size (volume)

Connection (ﬁlter connection in 1⁄8 of an inch increments)

Connection type

C 80% Molecular Sieve / 20% activated alumina

M 100% Molecular Sieve core

03 3 in.

05 5 in.

08 8 in.

16 16 in.

30 30 in.

38 38 in.

41 41 in.

60 60 in.

75 75 in.

2.5

⁄4 in. / 6 mm

⁄16 in. / 8 mm

⁄8 in. / 10 mm

⁄2 in. / 12 mm

⁄8 in. / 16 mm

⁄4 in. / 18 (19) mm

⁄8 in. / 22 mm

9 11⁄8 in. / 28 mm

(blank) Flare connection

s Solder connection

Example for type codes

D C L 05 3 s

Filter drier

Solid core

Application

Size (volume)

Connection (ﬁlter connection

Connection type

⁄8 of an inch increments)

Data sheet | ELIMINATOR® Hermetic ﬁlter drier, types DML and DCL

Selection

Type selection is made considering the application

Refrigerant and oil types DCL DML

HFO Recommended Recommended

Refrigerant

Oil

) Only solder versions (cu-plated / pure copper) and connection sizes below 25 mm are approved for ﬂammable refrigerants now.

) DCL Hermetic ﬁlter driers contain activated alumina, which is a polar material used for acid adsorption. Many oil additives are also polar substances and can be adsorbed by the activated alumina, rendering them useless, and reducing the drier’s acid capacity, though this is not harmful to the system.

HC 1) Recommended Recommended

HFC Recommended Recommended

HCFC Recommended Recommended

Mineral or AB Recommended Recommended

POE or PAG, pure Recommended Recommended

POE or PAG, with additives Not recommended 2) Recommended

Selection example Select the appropriate type (DML or DCL) based

on refrigerant and oil type. Then select the drier size based on the adsorption and liquid capacity required.

a. Amount of charge: 25 kg R134a at tL= 24 °C

To dry 25 kg R134a at 24 °C from 1050 to 60 ppm moisture, a DML 16 is necessary

b. Cooling capacity: Qe= 20 kW

To obtain a mass ﬂow corresponding to 20 kW cooling capacity with a DML 16 ﬁlter drier, a 3⁄8 inch connection must be chosen. Larger connections can be chosen in accordance with the liquid line dimension

c. Result

DML 163 or DML 163s can be used

If the initial moisture content is very small or a planned change of the ﬁlter drier is considered, a smaller ﬁlter drier size can be chosen.

Drying capacity [kg] refrigerant 1) Liquid capacity [kW] 2)

Type

DML 1.52s 2.9 2.7 3 .1 3.0 3.2 2.9 2.9 2.7 2.9 2.7 2.6 2.4 2.7 2.5 5.97 4 .21 3.86 6.32 5.97 5.97 8.78

DML 1.52x2/2s 2.9 2.7 3.1 3.0 3.2 2.9 2.9 2.7 2.9 2.7 2.6 2.4 2.7 2.5 5.97 4.21 3.86 6.32 5.97 5.97 8 .78

DCL 032.5s 3.9 3.6 4.2 3.9 4.2 3.9 3.9 5.0 4.7 5.0 4.5 4.2 4.6 4.2 9.59 6.97 6.75 10. 52 9.97 10.31 15.10

DCL 033/033s 5.0 4.7 5.3 5.1 5.4 3.9 3.9 3.6 3.9 3.6 3.5 3. 2 3.6 3.3 12. 85 9. 86 9.57 14. 46 13 .84 14. 67 21.40

DML 163/163s 27. 7 26.2 29.8 28.3 30.4 28.0 28.1 26.0 2 7.8 25.7 25.3 23.3 25.6 23.6 16 .33 11.1 8 10 .82 17.41 16. 33 16.43 24.16

DML 164/164s 27. 7 26.2 29.8 28.3 30.4 28.0 28.1 26.0 2 7.8 25.7 25.3 23.3 25.6 23.6 32 .19 23.54 22.81 35.40 33.60 34.83 50.99

DML 165/165s 27. 7 26.2 29.8 28.3 30.4 28.0 28.1 26.0 2 7.8 25.7 25.3 23.3 25.6 23.6 44.64 36.59 35.59 51. 82 50 .16 54.83 79.63

DML 166/166s 27. 7 26.2 29.8 28.3 30.4 28.0 28.1 26.0 2 7.8 25.7 25.3 23.3 25.6 23.6 45.53 37.37 36.35 52.89 51. 20 56. 01 81.33

DML 167s 27. 7 26.2 29.8 28.3 30.4 28.0 28 .1 26.0 2 7.8 25.7 25.3 23.3 25.6 23.6 43.92 4 0.14 3 9.19 53.50 52.78 60.97 8 7.77

DML 303/303s 12. 6 11.9 13.6 12 .9 13 .8 58.3 58.5 54.0 57. 8 53.4 52.6 48.5 53.3 49.2 15 .70 10 .5 6 10.66 16 .03 15. 37 15. 48 22.79

DCL 084/084s 12. 6 11 .9 13.6 12 .9 13 .8 12.8 12.8 11. 8 12.7 11. 7 11. 5 10.6 11 .7 10. 8 28 .61 21.3 3 20.68 31.76 30.24 31.6 3 4 6.24

DCL 162/162s 21.6 20.5 23.3 22 .1 23.7 21.9 21.9 20.3 21. 7 20.0 19. 7 18. 2 20.0 18.4 7. 68 5.43 5.26 8 .31 7. 85 8.01 11 . 75

R134a R404A R507 R22 R407C R410A R32

R134a R404A R507 R22 R407C R410A R32[°C]

24 52 24 52 24 52 24 52 24 52 24 52 24 52

Data sheet | ELIMINATOR® Hermetic ﬁlter drier, types DML and DCL

Design / Function

DML / DCL 03

DML / DCL 05

DML / DCL 08, DML / DCL 16 DML / DCL 30, DML / DCL 41

.13

Danfoss

23Z22.11

1. Inlet

2. Spring

3. Solid core

4. Polyester mat

5. Perforated plate

6. Seal cap, ﬂare connection

7. Seal cap, solder connection

DML / DCL 60, DML / DCL 75

The relatively large diameter of the hermetic ﬁlter drier means that the liquid ﬂow velocity is suitably low and the pressure drop minimal.

Powder formation is eliminated because the solid core grains are bonded and cannot move against each other.

Data sheet | ELIMINATOR® Hermetic ﬁlter drier, types DML and DCL

Dimensions and weights

Flare connections

Type

A A

[mm] [mm] [mm] [mm] [mm] [mm] [Kg]

DCL / DML 032 66 33 33 110 46 43 0.17

DCL / DML 033 66 33 33 123 46 43 0.19

L D

Net weight

Type

A A

[mm] [mm] [mm] [mm] [mm] [mm] [Kg]

L D

Net weight

DCL / DML 052 75 24.5 50.5 119 58 54 0.24

DCL / DML 053 75 24.5 50.5 132 58 54 0.27

Data sheet | ELIMINATOR® Hermetic ﬁlter drier, types DML and DCL

Dimensions and weights (continued)

Flare connections

Type

DCL / DML 082

DCL / DML 083

DCL / DML 084

DCL / DML 085

DCL / DML 162

DCL / DML 163

DCL / DML 164

DCL / DML 165

DCL / DML 166

A A

[mm] [mm] [mm] [mm] [mm] [mm] [Kg]

L D

Net weight

101 50.5 50.5 145 58 54 0.31

101 50.5 50.5 158 58 54 0.35

101 50.5 50.5 166 58 54 0.37

101 50.5 50.5 175 58 54 0.40

110 55.0 55.0 15 4 80 76 0.65

110 55.0 55.0 167 80 76 0.67

110 55.0 55.0 175 80 76 0 .74

110 55.0 55.0 184 80 76 0.74

110 55.0 55.0 182 80 76 0.84

Type

DCL / DML 303

DCL / DML 304

DCL / DML 305

DCL / DML 306

DML 385

DCL / DML 413

DCL / DML 414

DCL / DML 415

A L D

[mm] [mm] [mm] [mm] [Kg]

Net weight

186 243 80 76 1.28

186 251 80 76 1.32

186 260 80 76 1.35

186 258 80 76 1.45

151 225 93 89 1.59

187 244 93 89 1.79

187 252 93 89 1.82

187 261 93 89 1. 87

Data sheet | ELIMINATOR® Hermetic ﬁlter drier, types DML and DCL

Dimensions and weights (continued)

Solder connection (cu-plated steel connectors)

Danfoss

23Z80.10

Type

A A

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [Kg]

DCL / DML 032s 66 33 33 84 98 46 43 0.17

DCL / DML 032.5s 66 33 33 85 101 46 43 0.16

DCL / DML 033s 66 33 33 86 104 46 43 0.16

DCL / DML 034s 66 33 33 84 108 46 43 0.16

B L D

Net weight

Danfoss

23Z81.10

Type

A A

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [Kg]

B L D

Net weight

DCL / DML 052s 75 24.5 50.5 93 107 58 54 0.24

DCL / DML 052.5s 75 24.5 50.5 94 110 58 54 0.24

DCL / DML 053s 75 24.5 50.5 95 113 58 54 0.23

DCL / DML 054s 75 24.5 50.5 97 117 58 54 0.24

DCL / DML 055s 75 24.5 50.5 101 125 58 54 0.26

Data sheet | ELIMINATOR® Hermetic ﬁlter drier, types DML and DCL

Dimensions and weights (continued)

Solder connection (cu-plated steel connectors)

Danfoss

23Z82.10

Type

A A

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [Kg]

DCL / DML 082s 101 50.5 50.5 119 133 58 54 0.30

DCL / DML 082.5s 101 50.5 50.5 120 136 58 54 0.30

DCL / DML 083s 101 50.5 50.5 121 139 58 54 0.30

DCL / DML 084s 101 50.5 50.5 123 143 58 54 0.31

DCL / DML 085s 101 50.5 50.5 127 151 58 54 0.32

DCL / DML 162s 110 55.0 55.0 128 142 80 76 0.64

DCL / DML 162.5s 110 55.0 55.0 129 145 80 76 0.64

DCL / DML 163s 110 55.0 55.0 130 148 80 76 0.65

DCL / DML 164s 110 55.0 55.0 132 152 80 76 0.65

DCL / DML 165s 110 55.0 55.0 136 160 80 76 0.66

DCL / DML 166s 110 55.0 55.0 136 164 80 76 0.69

DCL / DML 167s 110 55.0 55.0 136 170 80 76 0.70

B L D

Net weight

Danf already on order pro All trademarks in this material are property of the respec

Dimensions and weights (continued)

Solder connection (cu-plated steel connectors)

Danfoss

23Z83.10

Type

A B L D

[mm] [mm] [mm] [mm] [mm] [Kg]

Net weight

DCL / DML 303s 186 206 224 80 76 1.28

DCL / DML 304s 186 208 228 80 76 1.26

DCL / DML 305s 186 212 236 80 76 1.27

DCL / DML 306s 186 212 240 80 76 1.30

DCL / DML 307s 186 212 246 80 76 1.32

DCL / DML 309s 186 196 250 80 76 1.37

DCL / DML 414s 187 209 229 93 89 1.84

DCL / DML 415s 187 213 237 93 89 1.85

DCL / DML 417s 187 213 247 93 89 1.88

DCL / DML 419s 187 197 251 93 89 1.90

DCL / DML 604s 337 359 379 80 76 2.98

DCL / DML 606s 337 363 391 80 76 2.21

DCL / DML 607s 337 363 397 80 76 2.21

DCL / DML 609s 337 347 401 80 76 2.32

DCL / DML 757s 338 364 398 93 89 3.10

DCL / DML 759s 338 348 402 93 89 3.10

oss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products

vided that such alterations can be made without subsequential changes being necessary eady agreed.

Danfoss Electronics DML, DCL Data Sheet

Specifications and Main Features

Frequently Asked Questions

User Manual