Danfoss Electronics BD35F Data Sheet

Barcode on white backgroun

Datasheets

BD35F

Direct Current Compressor

R134a 12/24V DC, 10-45V DC Solar & 100-240V AC 50/60Hz

General

Code number (without electronic units) 101Z0200 Approvals

Electronic unit 12/24V DC - Standard 101N0212, 30 pcs: 101N0213 –

Electronic unit 12/24V DC - AEO 101N0340, 30 pcs: 101N0341 UL

Electronic unit 10-45V DC - Solar 101N0420, 30 pcs: 101N0421 –

Electronic unit 12/24V DC & 100-240V AC 50/60Hz 101N0510, 28 pcs: 101N0511 UL / VDE

Electronic unit 12/24V DC - Automotive 101N0650, 30 pcs: 101N0651 UL

Compressors on pallet 150

Application

Application LBP/MBP/HBP

Evaporating temperature °C -30 to 0 (10)

Voltage range DC VDC 9.6 - 17 / 21.3 - 31.5

Voltage range AC V/Hz 100 - 240 / 50/60

Voltage range for solar applications VDC 10 - 45

Max. condensing temperature continuous (short)

Max. winding temperature continuous (short) °C 125 (135)

Cooling requirements

Application LBP MBP HBP

32°C S S S

38°C S S S

43°C S S S

Remarks on application: Fan cooling F

Motor

Motor type variable speed

Resistance, all 3 windings (25°C) Ω 2.2

depending on application and speed.

°C 60 (70)

Blue stripe

Grey background Country of origin or manufacturer

BD35F

only with BD controller

R134a

S =Staticcoolingnormallysufcient

O = Oil cooling

= Fan cooling 1.5 m/s

(compressor compartment temperature equal to ambient temperature) F2 = Fan cooling 3.0 m/s necessary

SG =Suctiongascoolingnormallysufcent

– = not applicable in this area

serial number

Made by Secop

101Z

0200

Design

Displacement cm

Oil quantity (type) cm

Maximum refrigerant charge g 300

Free gas volume in compressor cm

Weight - Compressor/Electronic unit kg 4.3 / 0.19 (Standard)

Standard battery protection settings

Voltage 12V 24V

Cut out VDC 10.4 22.8

Cut in VDC 11.7 24.2

Dimensions

Height mm A 137

Suction connector location/I.D. mm | angle C 6.2 | 40°

Process connector location/I.D. mm | angle D 6.2 | 45°

Discharge connector location/I.D. mm | angle E 5.0 | 21°

Connector tolerance I.D. mm ±0.09, on 5.0 +0.12/+0.20 Remarks:

(refer to electronic unit Instructions for optional settings)

B 135 B1 128 B2 73

material | comment Cu-plated steel | Al cap

2.00

150 (polyolester)

870

DEHC.ED.100.G9.02 | 1

Capacity (EN 12900 Household/CECOMAF) 12V DC, static cooling watt

101N0212

Interface connected to (T

option 2

non interface option (resistors)

option 1

Danf

oss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products

already on order pro

vided that such alterations can be made without subsequential changes being necessary eady agreed.

All trademarks in this material are property of the respec

rpm \ °C -30 -25 -23.3 -20 -15 -10 -5 0 5 7.2 10 15 2,000 16.0 23.8 26.7 32.9 43.7 56.5 71.8 89.8 111 121 136 2,500 18.8 29.9 33.9 41.9 55.4 71.1 89.8 11 2 139 152 3,000 22.4 32.9 37.1 46.1 62.5 82.2 106 133 3,500 27.0 35.9 40.2 50.3 69.8 93.9 122

Capacity (ASHRAE LBP) 12V DC, static cooling watt

rpm \ °C -30 -25 -23.3 -20 -15 -10 -5 0 5 7.2 10 15 2,000 20.0 29.8 33.4 41.2 54.6 70.6 89.7 112 139 152 169 2,500 23.6 37.5 42.4 52.4 69.2 88.8 112 140 173 190 3,000 28.1 41.3 46.5 57.9 78.2 103 132 166 3,500 33.9 45.1 50.5 63.1 87.3 11 7 153

Power consumption 12V DC, static cooling watt

rpm \ °C -30 -25 -23.3 -20 -15 -10 -5 0 5 7.2 10 15 2,000 17.7 22.9 24.6 27.7 32.2 36.7 41.3 46.2 51.6 54.3 57.8 2,500 22.1 29.7 32.0 36.3 42.4 48.1 53.8 59.7 66.1 69.1 3,000 29.3 34.6 36.7 41.2 48.7 56.5 64.5 72.0 3,500 34.5 41.3 43.8 48.9 57.3 66.2 75.4

Current consumption (for 24V applications the following must be halfed) A

rpm \ °C -30 -25 -23.3 -20 -15 -10 -5 0 5 7.2 10 15 2,000 1.4 1.9 2.0 2.3 2.7 3.1 3.4 3.8 4.3 4.5 4.8 2,500 1.8 2.5 2.7 3.0 3.5 4.0 4.5 5.0 5.5 5.8 3,000 2.4 2.9 3.1 3.4 4.0 4.7 5.3 6.0 3,500 2.9 3.4 3.6 4.1 4.8 5.5 6.3

COP (EN 12900 Household/CECOMAF) 12V DC, static cooling W/W

rpm \ °C -30 -25 -23.3 -20 -15 -10 -5 0 5 7.2 10 15 2,000 0.90 1.04 1.09 1.19 1.36 1.54 1.74 1.94 2.15 2.24 2.35 2,500 0.85 1.01 1.06 1.15 1.31 1.48 1.67 1.88 2.10 2.20 3,000 0.76 0.95 1.01 1.12 1.28 1.45 1.64 1.85 3,500 0.78 0.87 0.92 1.03 1.22 1.42 1.62

COP (ASHRAE LBP) 12V DC, static cooling W/W

rpm \ °C -30 -25 -23.3 -20 -15 -10 -5 0 5 7.2 10 15 2,000 1.13 1.30 1.36 1.49 1.70 1.93 2.18 2.44 2.70 2.81 2.95 2,500 1.07 1.26 1.33 1.45 1.64 1.86 2.10 2.36 2.64 2.77 3,000 0.96 1.19 1.27 1.41 1.61 1.83 2.06 2.32 3,500 0.98 1.09 1.15 1.29 1.53 1.78 2.03

Test conditions with electronic units EN 12900/CECOMAF ASHRAE LBP

Condensing temperature

55°C 54.4°C Ambient temperature 32°C 32°C Suction gas temperature 32°C 32°C Liquid temperature no subcooling 32°C

101N0212

101N0650

Accessories for BD35F Code number

Bolt joint for one comp. Ø:16 mm 118-1917 Bolt joint in quantities Ø:16 mm 118-1918 Snap-on in quantities Ø:16 mm 118-1919 Remote kit (without cable) 105N9210 One Wire/LIN gateway 105N9501

DC usage:

AC usage:

Automoblie fuse, DIN 7258 12V: 15A | 24V: 7.5 A Main switch

min. 20A Fuse, 100-240V Main switch

Power supply

option a

OOL4COOL® or display)

One Wire LIN Gateway

Secop One Wire

Tx Rx

LIN Gateway

USB

Code no.: 105N9501

USB

USB 2.0

105N9501– V01.00

D/I C

NTC resistor

–t°

option 2

Fuse

One Wire

/ LIN

Electronics (One Wire / LIN)

and

mech. Thermostat

option 1

Main switch

Fan

LED

option b

LED connected

to and+ D/I

Power supply

One Wire LIN Gateway

USB

option a

Interface connected to and (TOOL4COOL® or display)

NTC resistor

–t°

101N0340 101N0650

R1 = speed selection R2 = battery protection

non interface option (resistors)

Fuse

Secop One Wire

Tx Rx

LIN Gateway

One Wire

Code no.: 105N9501

/ LIN

USB

Electronics

USB 2.0

(One Wire / LIN)

105N9501–V01.00

D/I C

mech. Thermostat

min. 6A

+ F D/I

C P T

Main switch

LED

option b

LED connected

to and+ D/I

100-240V AC

Terminal plug

Main switch

50/60Hz

Not

deliverable

from Secop

101N0510

L N

–

Fan

F A C

D/I

C P T

compressor baseplate

R1 = speed selection R2 = battery protection

Compressor speed

Electronit unit Resistor (R1)

[Ω]

Code number

calculated

Motor speed

values [rpm]

0 2,000 5

101N0212 101N0510 101N0650

277 2,500 4

692 3,000 3

1523 3,500 2

0 AEO 6

101N0340 101N0420 with AEO

173 2,000 5

450 2,500 4

865 3,000 3

1696 3,500 2

In AEO (Adaptive Energy Optimizing) speed mode the BD comressor will always adapt its speed to the actual cooling demand.

Wire dimensions DC

Size Max. length* Max. length*

Cross AWG 12V operation 24V operation

section

] [Gauge] [m] [ft.] [m] [ft.]

[mm

2.5 12 2.5 8 5 16 4 12 4 13 8 26 6 10 6 20 12 39

10 8 10 33 20 66

*Length between battery and electronic unit

Wire dimensions AC

Cross section min. 0.75 mm

Operational errors

Error code

or LED

ashes

Thermostat failure

or AWG 18

Error type

Can be read out in the software

TOOL4COOL®

(If the NTC thermistor is short-circuit or has no connection).

Thermal cut-out of electronic unit

(If the refrigeration system has been too hea vi ly loaded, or if the ambient tem pe ra ture is high, the electronic unit will run too hot).

Minimum motor speed error

(If the refrigeration system is too heavily loaded, the motor cannot maintain minimum speed at approximately 1,850 rpm).

Motor start error

(The rotor is blocked or the differential pressure in the refrigeration system is too high (>5 bar)).

Too many start attempts or fan over current

(Too many compressor or fan starts in short time or fan current higher than 0.5A

Battery protection cut-out

avg

(The voltage is outside the cut-out setting).

R1 = speed selection R2 = battery protection

non interface option (resistors)

8615-18

101N0420

+ F D/I

C P T

Solar panel

One Wire LIN Gateway

Secop One Wire

Tx Rx

LIN Gateway

USB

Code no.: 105N9501

USB

Electronics

USB 2.0

(One Wire / LIN)

105N9501– V01.00

option a

Interface connected to and (TOOL4COOL® or display)

D/I C

NTC resistor

–t°

option 2

Remote kit

Fuse

Fan

One Wire

/ LIN

option b

LED connected

to and+ D/I

mech. Thermostat

option 1

Main switch

LED

Control

circuit

current[mA]

Danfoss Electronics BD35F Data Sheet

Specifications and Main Features

Frequently Asked Questions

User Manual