Danfoss XGC C054P Data sheet

Data sheet

Plate heat exchanger XGC C054P

Dimensions, mm

The Plate Heat Exchanger has 4 connections as standard and should be installed with min. 1000 mm space on both sides for service work.

Subject to alterations without prior notice.

		M4 M1
		M3 M2
S4	S1
		Movable cover, M
S3	S2	Stationary cover,S

DH-SMT/FI

VD.EJ.D1.02 © Danfoss 03/2009

Data sheet	Plate heat exchanger XGC C054P

Dimensions, mm

Standard connection dimension	DN150
Tightening bolt	M39
No. of long tightening bolts (TL)	4
No. of short tightening bolts (TS)	4
Cover thickness	50 mm
Weight of guiding bar	11 kg/m
Weight of reinforced guiding bar	17 kg/m
Weight of tightening bolt	8,1 kg/m
A-dimension	2,1*n mm
C-dimension	LG+56 mm
F-dimension	LG+6 mm
Weight plate+gasket (W) AISI 304/316 0,4 mm	1,92kg
Titanium 0,4 mm	1,11 kg
Weight Frame	880+n*W kg

	Max No of plates			LTL			LG			C			F
	69		500			600			656			606
	88		750			600			656			606
	128		750			1000			1056			1006
	183		1050			1000			1056			1006
	200		1050			1350			1406			1356
	266		1350			1350			1406			1356
	271		1350			1550			1606			1556
	314		1650			1550			1606			1556
	342		1650			1900			1956			1906
	397		1950			1900			1956			1906
	414		1950			2250			2306			2256
	480		2250			2250			2306			2256
	485		2250			30001)			3056			3006
	659		3000			30001)			3056			3006

LTL = Length of long tightening bolt, based on 4,2 x n + 210 mm LG = Length of guiding bar, based on 4,2 x n + 230 mm

n = number of plates

Total max no. of plates

AISI 304/316 0,4 mm

700

Total min no. of plates

AISI 304/316 0,4 mm

30

1) LG>2372 mm reinforced guiding bar Height+60mm.

All data is based on plates with material AISI 304/316 and thickness 0,4 mm.

VD.EJ.D1.02

Produced by Danfoss A/S © 03/2009